Northwest Copper Reports Financial Results FOR the Fiscal
Page 1 of 6
News Release
NORTHWEST COPPER REPORTS FINANCIAL RESULTS FOR THE FISCAL
YEAR ENDED FEBRUARY 28, 2021 AND OPERATING HIGHLIGHTS
Vancouver, BC – June 4, 2021 – NorthWest Copper (“ NorthWest” or the “Company”) (TSXV:NWST) is
pleased to announce financial results for the fiscal year ended February 28, 2021 and recent operating
highlights.
Highlights and Recent Events
Merger with Sun Metals Corp.
On March 5, 2021, the Company announced it had completed the previously announced plan of
arrangement under the Business Corporations Act (British Columbia) (the “Arrangement”) with Sun
Metals Corp. (“Sun Metals”) pursuant to which NorthWest acquired all o f the issued and outstanding
shares of Sun Metals (the “Transaction”) on the basis of 0.215 common shares for each share of Sun
Metals held. In connection with closing the Transaction, the gross proceeds of $10,350,000 of the bought
deal private placement financing completed by Sun Metals in December 2020, less the underwriters cash
commission of 6% and underwriters’ expenses, were released from escrow1.
Funded Future Growth
On March 31, 2021 the Company closed an additional bought-deal private placement, pursuant to which
the Company issued 3,750,000 common shares (the “Shares”) at a price of $0.80 per Share, 5,000,000
flow-through common shares (the “FT Shares”) at a price of $1.00 per FT Share, and 4,550,000 charity
flow-through common shares (the “C harity FT Shares”) at a price of $1.10 per Charity FT Share, for
aggregate gross proceeds of $13,005,000 (the “Offering”). In connection with the Offering, the Company
paid the underwriters a cash commission equal to 6.0% of the gross proceeds of the Offering.
Strengthened Management Team And Board
In connection with the merger with Sun Metals, the Company added Peter Bell as President and CEO,
Lauren McDougall as CFO and Corporate Secretary , Ian Neill as VP Exploration and James Lang as Chief
Geoscientist. Mark O’Dea (Executive Chair), Sean Tetzlaff and Richard Bailes joined the Company’s Board
of Directors, replacing James Morton and Eric Strom.
1 See press releases dated December 17, 2020 and March 5, 2021 available at www.northwestcopper.ca and under the Company’s profile on
SEDAR at www.sedar.com
Page 2 of 6
Expanded Stardust Resource and Metallurgical Results
On May 17, 2021, the Company announced a new mineral resource estimate for Stardust 2 which
incorporates the 421 zone, and consists of Indicated mineral resources totaling 1,962,900 tonnes at 2.59%
CuEq3, 1.31% Cu, 1.44 g/t Au and 27.1 g/t Ag and Inferred mineral resources totaling 5,843,200 tonnes at
1.88% CuEq, 0.86% Cu, 1.17 g/t Au and 20.0 g/t Ag all at a cut-off of US $65/tonne and 2.5 metre minimum
mining width. The updated Stardust mineral resource estimate was prepared by Ronald G. Simpson,
P.Geo, of GeoSim Services Inc., and replaces the previous Stardust mineral resource estimate 4. See
Stardust Resource NI 43-101 Disclosure below for further information.
Table 1 – Summary of Indicated and Inferred Resources
Resource
Classification
Tonnes >
COG
Grades
%Cu g/t Au g/t Ag CuEq³
Indicated 1,962,900 1.31 1.44 27.1 2.59
Inferred 5,843,200 0.86 1.17 20.0 1.88
Table 2- Resource Sensitivity to changes in cut-off grade
Indicated Grades
COG $/t Tonnes >
COG %Cu g/t Au g/t Ag CuEq³
65 1,962,888 1.31 1.44 27.1 2.59
85 1,603,223 1.48 1.62 30.2 2.93
105 1,309,183 1.65 1.82 33.2 3.25
125 1,061,374 1.83 2.02 36.2 3.60
Inferred Grades
COG
$/t Tonnes > COG %Cu g/t Au g/t Ag CuEq³
65 5,843,160 0.86 1.17 20.0 1.88
85 4,317,343 0.97 1.35 22.6 2.15
105 3,091,762 1.10 1.54 24.9 2.43
125 2,158,409 1.24 1.73 27.6 2.73
Notes:
• Mineral resources are not mineral reserves and do not have demonstrated economic viability. There is no certainty that all or any part
of the mineral resources estimated will be converted into mineral reserves. The estimate of mineral resources may be ma terially
affected by geology, environment, permitting, legal, title, taxation, sociopolitical, marketing or other relevant issues. Inferred mineral
resources have a great amount of uncertainty as to their existence and as to whether they can be mined econo mically. It cannot be
assumed that all or part of the Inferred mineral resources will ever be upgraded to a higher category.
2 See press release dated May 17, 2021 available at www.northwestcopper.ca and under the Company’s profile on SEDAR at www.sedar.com
3 The following equation was used to calculate copper equivalence: CuEq = Copper (%) + (Gold (g/t) x 0.718) + (Silver (g/t) x 0.009).
4 Please see NI 43-101 technical report titled “Stardust Project NI 43 -101 Technical Report” with an effective date of January 8, 2018 available
under Sun Metals Corp.’s SEDAR profile at www.sedar.com for the previous mineral resource on the Stardust deposit.
Page 3 of 6
Exploration Outlook
NorthWest is planning an extensive $8.5 million exploration program for the 2021 field season. Field work
at the Stardust and Kwanika projects has begun, and drilling is scheduled to commence at Kwanika in early
June, consisting of two diamond drill rigs. Other activities planned for the Stardust and Kwanika projects
during the 2021 field season include regional mapping, sampling and geophysical surveys. The drill
program will focus on upgrading the Kwanika resource through targeting of areas within the underground
resource that have not been sufficiently drill tested to date. Nearby deposit areas which hold potential
for resource expansion will also be tested, along with regional targets that have the opportunity of
improving overall project economics. In addition, Northwest plans to conduct an initial drill testing
program on the East Niv property, along with mapping and sampling programs at the Lorraine, Top Cat,
Arjay, Croy-Bloom and Tchentlo projects.
Selected Financial Data
The following selected financial data is derived from our Consolidated Financial Statements and related
notes thereto for the periods indicated, as prepared in accordance with International Financial Reporting
Standards. Details of these results are described in the Consolidated Financial Statements and
Management’s Discussion and Analysis for the fiscal year ended February 28, 2021. These documents can
be found on the Company’s website ( www.northwestcopper.ca) or on SEDAR at www.sedar.com . All
dollar figures are expressed in Canadian $.
This press release should be read in conjunction with NorthWest’s Consolidated Financial Statements and
Management’s Discussion and Analysis for the fiscal year ended February 28, 2021. These documents can
be found on the Company’s website (www.northwestcopper.ca) or under the Company’s profile on SEDAR
at www.sedar.com. Shareholders may receive a printed copy of the audited consolidated financial
statements, free of charge, upon request.
Financial year ended: February 28, 2021 February 29, 2020 February 28, 2019
$ $ $
Total revenues Ni l Ni l Ni l
Net Income (l oss)
In Total (701,524) (3,505,444) 171,749
Per share (0.01) (0.07) 0.00
Comprehensi ve Income (l oss)
In Total (701,524) (3,505,444) 171,749
Per share (0.01) (0.07) 0.00
Total assets 19,709,950 19,369,718 18,806,757
Total long te rm financial liabilitie s 46,964 358,080 Ni l
Page 4 of 6
Stardust Resource NI 43-101 disclosure
The data cut-off used for the resource estimate is March 31, 2021. CIM Definition standards (2014) were
used for reporting the mineral resources. The database for Stardust contains 206 drill holes representing
74,253 m of drilling. Grade estimation is based on 186 drill holes and 3,124 composites of nominal 2.0-m
lengths. Reasonable prospects for economic extraction were determined by applying a minimum mining
width of 2.5 m and excluding isolated blocks and clusters of blocks that would likely not be mineable. The
base case cut-off of US$65/t was determined based on metal prices of US $3.25/lb copper, US $1,600/oz
gold and US $20/oz silver, underground mining cost of US $45/t, processing cost of US $15/t and G&A cost
of US $5/t. Recoveries used in calculation of the base case cut-off were based on recent metallurgical test
results and were assumed to be 94% for gold and copper and 86% for silver. Block tonnes were estimated
using a density of 3.4 g/cm 3 for mineralized material. Six separate mineral domain models were created
in Leapfrog Geo to constrain the estimate. Minimum width used for the wireframe models was 1.5 m. For
grade estimation, 2.0 -metre composites were created within the zone boundaries using the best- fit
method. Capping values on composites were used to limit the impact of outliers. For the zone 2 domain,
gold was capped at 15 g/t, silver at 140 g/t and copper at 7.5%. For all other domains, gold was capped at
6 g/t, silver at 140 g/t and copper at 5%.
Grades were estimated using the inverse distance cubed method. Dynamic anisotropy was applied using
trend surfaces from the vein models. A minimum of 3 and maximum of 12 composites were required for
block grade estimation. Blocks were classified based on drill spacing. Blocks falling within a drill spacing of
30 m within zones 2, 3, and 6 were initially assigned to the Indicated category. All other estimated blocks
within a maximum search distance of 100 m were assigned to the Inferred category. Blocks were
reclassified to eliminate isolated Indicated resources within Inferred resources. Totals may not sum due
to rounding.
In support of the resource, metallurgical testing was done on Stardust 5, which showed very high copper
recoveries of 94.2% to 98.6% and similarly high gold recoveries of 93% to 93.9%. A preliminary flowsheet
was outlined suggesting a 150 micron initial grind and a 45 to 50 micron regrind. Copper in concentrate
grades were 21.8% to 26.2%.
QA/QC and Core Sampling Protocols
Drilling completed at Stardust in 2017 -2020 was supervised by on -site personnel who collected and
tracked samples and implemented a full QA/QC program using blanks, standards and duplicates to
monitor analytical accuracy and precision. The samples were sealed on site and shipped to Bureau Veritas
(BV) in Vancouver BC for analysis. BV’s quality control system complies with global certifications for
Quality ISO9001:2008. Core samples were analyzed using a combination of BV’s AQ270 process for low
level concen trations (ICP -ES/MS aqua regia) and the MA270 process for higher level concentrations
(ICPES/MS 4 acid digestion). Gold assaying was completed with FA330, a 30 -gram fire assay with ICP -ES
finish. Base metal overlimits were finalized with titration, with go ld overlimits completed with a
gravimetric finish. A silica wash was used between high-grade samples to ensure no sample carry over.
5 See press release dated April 19, 2021 available at www.northwestcopper.ca and under the Company’s profile on SEDAR at www.sedar.com
Page 5 of 6
Qualified Persons and 43-101 Disclosure
The updated Stardust mineral resource estimate was prepared by Ronald G. Simpson, P.Geo., Principal,
Geosim Services Inc., an independent Qualified Person in accordance with the requirements of National
Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”).
Technical aspects of this news release have been reviewed, verified and approved by Ian Neill P.Geo., Vice
President Exploration of NorthWest, who is a Q ualified Person as defined by NI 43 -101. NorthWest’s
Qualified Person confirm ed there were no limitations from the Company in verifying the drilling and
sample data underlying the mineral resource estimate which were verified through site visit observations
and monitoring of the QA/QC program.
About NorthWest Copper:
NorthWest Copper is a new diversified copper- gold explorer and developer with an exciting pipeline of
projects in British Columbia. With a robust portfolio in a tier one jurisdiction, NorthWest Copper is well
positioned to participate fully in a strengthening glob al copper market. Additional information can be
found on the Company’s website at www.northwestcopper.ca.
On Behalf of the Board of Directors of NorthWest Copper Corp.
“Peter Bell”
President and Chief Executive Officer
For further information, please contact:
Adrian O’Brien, Director Marketing & Communications
Tel: 604-809-6890
Email: [email protected]
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies
of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Statement Regarding Forward Looking Information
All statements, trend analysi s and other information contained in this press release about anticipated future events or results
constitute forward -looking statements including, but not limited to: statements with respect to the estimation of mineral
resources; magnitude or quality of mineral deposits; anticipated advancement of mineral properties or programs; future
operations; future exploration prospects; future growth potential of NorthWest Copper; and future development plans. Forward-
looking statements are often, but not always, identified by the use of words such as “seek”, “anticipate”, “believe”, “plan”,
“estimate”, “expect” and “intend” and statements that an event or result “may”, “will”, “should”, “could” or “might” occur or be
achieved and other similar expressions. All statements, other than statements of historical fact, included herein, are forwar d-
looking statements. Although NorthWest Copper believes that the expectations reflected in such forward- looking statements
Page 6 of 6
and/or information are reasonable, undue reliance should not be placed on forward-looking statements since NorthWest Copper
can give no assurance that such expectations will prove to be correct. These statements involve known and unknown risks,
uncertainties and other factors that may cause actual results or events to differ materially from those anticipated in such forward-
looking statements, including the risks, uncertainties and other factors identified in NorthWest Copper’s periodic filings with
Canadian securities regulators. Forward- looking statements are subject to business and economic risks and uncertainties and
other factors that could cause actual results of operations to differ materially from those contained in the forward- looking
statements. Important factors that could cause actual results to differ materially from NorthWest Copper’s expectations include
risks associated with the business of NorthWest Copper; risks related to reliance on technical information provided by NorthWest
Copper; risks related to exploration and potential development of the Company’s projects; business and economic conditions in
the mining industry generally; fluctuations in commodity prices and currency exchange rates; uncertainties relating to
interpretation of drill results and the geology, continuity and grade of mineral deposits; the need for cooperation of government
agencies and native groups in the exploration and development of properties and the issuance of required permits; the need to
obtain additional financing to develop properties and uncertainty as to the availability and terms of future financing; the possibility
of delay in exploration or development programs and uncertainty of meeting anticipated program milestones; uncertainty as to
timely availability of permits and other governmental approvals; and other risk factors as detailed from time to time and additional
risks identified in NorthWest Copper’s filings with Canadian securities regulators on SEDAR in Canada (available at
www.sedar.com). Forward-looking statements are based on estimates and opinions of management at the date the statements
are made. NorthWest Copper does not undertake any obligation to update forward- looking statements except as required by
applicable securities laws. Investors should not place undue reliance on forward-looking statements.