New Pacific Intersects 524 Metres Grading 1.24 Grams Per Tonne Gold at the Carangas Project, Bolivia
NEWS RELEASE
New Pacific Intersects 524 Metres Grading 1.24 Grams Per Tonne
Gold at the Carangas Project, Bolivia
VANCOUVER, BRITISH COLUMBIA – FEBRUARY 21, 2023 – New Pacific Metals Corp. (“New
Pacific” or the “Company”) (TSX: NUAG; NYSE American: NEWP), together with its local Bolivian
partner, reports assay results from a deep dr ill hole DCAr0096 from the 2022 drill program at its
Carangas Silver-Gold Project, Oruro Department, Bolivia (the “Carangas Project” or the “Project”).
To date, assay results of 86 drill holes from the 115 holes drilled in 2022 have been received and
released while results of the remaining 29 drill holes are pending. Assay results and drill hole
specifications are listed in Tables 1 and 2.
HOLE DCAR0096 DRILL RESULTS
Hole DCAr0096 stepped out 60 m from hole DCAr0044 towards the northeast at the East Dome
(Figures 1 & 2) and was drilled to the southwest at a 252-degree azimuth. As reported on August
8, 2022, hole DCAr0044 intercepted 515 m (from 266 m to 781 m) grading 1.10 g/t Au and 6 g/t
Ag, including 88 m grading 2.57 g/t Au, 9 g/t Ag and 0.12% Cu (Figure 2).
Starting from surface, Hole DCAr0096 first intersected a silver horizon with a 164 m interval
grading 94 g/t Ag, 0.65% Pb and 1.72% Zn, including a 44 m interval grading 289 g/t Ag, 1.61%
Pb and 4.00% Zn. Then from 192 m to 319 m a polymetallic Pb-Zn-Au zone was intercepted with
a 127 m interval grading 0.24 g/t Au, 5 g/t Ag, 0.26% Pb and 0.54% Zn.
Further down hole DCAr0096, from 333 m to 857 m, a gold zone similar to hole DCAr0044 (Figure
2) was intercepted with a 524 m interval @ 1.24 g/t Au and 8 g/t Ag, including 51 m @ 4.56 g/t
Au and 0.10% Cu, and 35 m @ 3.35 g/t Au, 8 g/t Ag and 0.20% Cu. Hole DCAr0096 has extended
the thick gold mineralization at least 60 m to the northeast.
The most interesting finding from this hole is that high grade gold intervals occur in rhyolites with
disseminated pyrite preferentially along flow-banded textures, as shown in drill core (Figure 3). In
addition, high gold assay grades also occur along the contacts of rhyolites with strongly altered
volcanoclastic rocks, implying that gold mineralization is related to the rhyolite intrusion. The
mineralized rhyolites in hole DCAr0096 are likely part of a feeder zone to the northeast whereas
previously, gold mineralization was thought to have extended to the south at depth.
Table 1 Summary of Drill Intercepts
Hole_ID Depth_from Depth_to Interval_m Ag_g/t Au_g/t Pb_% Zn_% Cu_% AgEq_g/t
DCAr0096 0.68 164.70 164.02 94 0.01 0.65 1.72 0.02 173
incl. 63.39 107.70 44.31 289 0.01 1.61 4.00 0.04 475
191.71 318.94 127.23 5 0.24 0.26 0.54 0.01 49
333.45 857.37 523.92 8 1.24 0.02 0.03 0.09 107
incl. 431.00 482.20 51.20 20 4.56 0.05 0.02 0.10 356
incl. 533.44 568.08 34.64 8 3.35 0.03 0.03 0.20 269
Notes:
1. Drill location, altitude, azimuth, and dip of drill holes are provided in Table 2
2. Drill intercept is core length, and grade is length weighted. True width of mineralization is unknown due to the early stage of
exploration without adequate drill data.
Calculation of silver equivalent (“AgEq”) is based on the long-term median of th e August 2021 Street Consensus Commodity
Price Forecasts, which are US$22.50/oz for Ag, US$0.95/lb for Pb, US$1.10/lb for Zn, US$3.40/lb for Cu, and US$1,600/oz for
Au. The formula used for the AgEq calculation is as follows: AgEq = Ag g/t + Pb g/t * 0.0029 + Zn g/t * 0.00335 + Cu g/t *
0.01036 + Au g/t * 71.1111. This calculation assumes 100% recovery.
3. A cut-off of 20 g/t AgEq is applied to calculate the length- weighted intercept. At times, samples lower than 20 g/t AgEq may be
included in the calculation of consolidation of mineralized intercepts.
Figure 1 Simplified Geology and Drill Plan Map of the Carangas Project
Figure 2 Cross Section DCAr0096 Showing Holes DCAr0044 and DCAr0096
(50 m section slice thickness or +/‐25 m)
Figure 3 Core Photo of Mineralized Rhyolite from 453 m to 457 m in Hole DCAr0096
METAL ZONING AND MINERALIZATION MODEL
Assay results of Ag, Pb, Zn, Au and Cu are plotted for drill holes within a slice thickness of 400 m
(+/- 200m) along cross section of hole DCAr0096, as shown in Figure 4 below. The assay results
show apparent metal zoning: 1) gold-copper mineralization occurs at the centre related to rhyolite
intrusions; 2) surrounded by a lower temperature polymetallic lead-zinc zone; and 3) a thick silver
(plus lead and zinc) zone near surface.
A reasonable geological hypothesis for the Carangas Project supposes that rhyolites intruded into
sub-horizontal volcanoclastic units and introduced hydrothermal fluids and metals that
precipitated according to temperature gradients. Based on the intensity of mineralization the
rhyolitic intrusive appears to dip to the northeast and will be the target of future drilling.
Based on this metal zoning and mineralization model, as well as the drill results from DCAr0096,
nine deep holes are planned to step out to the east of DCAr0096 to test the potential extension
of gold mineralization down dip of the interpreted orientation of the rhyolite intrusive. Concurrently,
shallow holes are planned to test the southwest limb of the near-surface silver zone.
Figure 4: Cross Section DCAr0096 Assay Results (+/‐ 200m) Display Clear Zoning of Mineralization
Table 2 Summary of Drill Holes of Carangas Project
Hole_id Easting Northing Altitude Depth_m Azimuth (°) Dip (°) Target
DCAr0096 539353.75 7905398.90 3919.75 950.00 252 ‐70 CV
Note: 1. Drill collar coordinate system is WGS1984 UTM Zone 19S
2. Coordinate of drill collar is picked with Real Time Kinematics (RTK) GPS
3. CV ‐ Central Valley
QUALITY ASSURANCE AND QUALITY CONTROL
The Company maintains tight sample security and QA/QC for all aspects of its exploration
program at the Carangas Project. Drill core is logged, photographed and split on-site by the
company and stored under secure conditions until being shipped in security-sealed bags by New
Pacific staff in Company vehicles, directly from the project to ALS Global in Oruro, Bolivia for
preparation, and ALS Global in Lima, Peru for geochemical analysis. ALS Global is an ISO 17025
accredited laboratory independent from New Pacific. All samples are first analyzed by a multi-
element ICP package (ALS code ME-MS41) with ore grade specified limits for silver, lead, and
zinc, further analyzed using ALS code OG46. Further silver samples over specified limits are
analyzed by gravimetric analysis (ALS code of GRA21). Gold is assayed first by ICP and then by
fire assay with AAS finish (ALS code of Au-AA25). Certified reference materials, various types of
blank samples and duplicate samples are inserted into normal drill core sample sequences prior
to delivery to the laboratory for preparation and analysis. The overall ratio of quality control
samples in sample sequences is around twenty percent.
QUALIFIED PERSON
The scientific and technical information contained in this news release has been reviewed and
approved by Alex Zhang, P. Geo., Vice President of Exploration, who is a Qualified Person for
the purposes of National Instrument 43-101 — Standards of Disclosure for Mineral Projects ( “NI
43-101”). The Qualified Person has verified the information disclosed herein using standard
verification processes, including the sampling, preparation, security and analytical procedures
underlying such information, and is not aware of any significant risks and uncertainties or any
limitations on the verification process that could be expected to affect the reliability or confidence
in the information discussed herein.
ABOUT NEW PACIFIC
New Pacific is a Canadian exploration and development company with precious metal projects in
Bolivia. The Company’s flagship Project, the Silver Sand Silver Project, has released its inaugural
preliminary economic assessment (the “PEA”) results in January 2023. The PEA study shows a
post-tax NPV (5% discount) of US$726 million with an IRR of 39%, underpinned by a total silver
production of 171 million ounces over 14 years of mine life. At the recently discovered Carangas
Silver-Gold Project, a resource drilling program of more than 50,000 meters was completed in
2022. The third project, the Silverstrike Silver-Gold Project, had a 6,000 metre discovery drill
program in June 2022.
For further information, please contact:
Andrew Williams, President
New Pacific Metals Corp.
Phone: (604) 633-1368 Ext. 236
U.S. & Canada toll-free: 1-877-631-0593
E-mail: [email protected]
For additional information and to receive company news by e-mail, please register using New
Pacific’s website at www.newpacificmetals.com.
CAUTIONARY NOTE REGARDING RESULTS OF PRELIMINARY ECONOMIC ASSESSMENT
The PEA study results of Silver Sand Project are preliminary in nature and are intended to provide an initial assessment of the
project’s economic potential and development options. The PEA mine schedule and economic assessment includes numerous
assumptions and is based on both Indicated and Inferred mineral resources. Inferred resources are considered too speculative
geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves,
and there is no certainty that the project economic assessments described herein will be achieved or that the PEA results will be
realized. The estimate of mineral resources may be materially affected by geology, environmental, permitting, legal, title, socio‐
political, marketing or other relevant issues. Mineral Resources are not Mineral Reserves and do not have demonstrated economic
viability. Additional exploration will be required to potentially upgrade the classification of the Inferred Mineral Resources to be
considered in future advanced studies. AMC Mining Consultants (Canada) Ltd. (mineral resource, mining, infrastructure and
financial analysis) was contracted to conduct the PEA in cooperation with Halyard Inc. (metallurgy and processing), and NewFields
Canada Mining & Environment ULC (tailings, water and waste management). The Qualified Persons for the PEA are Mr. Wayne
Rogers P.Eng and Mr. Mo Molavi P.Eng both Principal Mining Engineers with AMC Mining Consultants (Canada) Ltd, Mr. Andy
Holloway P.Eng, Process Director with Halyard Inc., and Mr. Leon Botham P.Eng., Principal Engineer with NewFields Canada
Mining & Environment ULC. This is in addition to Ms. Dinara Nussipakynova, P.Geo., Principal Geologist with AMC Consultants
(Canada) Ltd. who estimated the Mineral Resources. All QPs have reviewed the technical content of the January 9, 2023, news
release for the Silver Sand deposit and have approved its dissemination. The Silver Sand PEA is based on the updated Mineral
Resource Estimate which was reported on November 28, 2022. The effective date of the 2022 Mineral Resource Estimate for Silver
Sand is 31 October 2022. The cut‐off applied for reporting the pit‐constrained Mineral Resources is 30 g/t silver. Assumptions
made to derive a cut‐off grade included mining costs, processing costs and recoveries and were obtained from comparable industry
situations. The model is depleted for historical mining activities. Mineral Resources are constrained by optimized pit shells at a
silver price of US$22.50 per ounce, silver metallurgical recovery of 91%, silver payability of 99%, open pit mining cost of US$2.6/t,
processing cost of US$16/t, G&A cost of US$2/t, and slope angle of 44‐47 degrees. Key assumptions used for pit optimization for
the PEA mining pit include silver price of US$22.50 per ounce, silver metallurgical recovery of 91%, silver payability of 99%, open
pit mining cost of US$2.6/t, incremental mining cost of US$0.04/t (per 10 m bench), processing cost of US$16/t, tailing storage
facility operating cost of US$0.7/t, G&A cost of US$2/t, royalty of 6.00%, mining recovery of 92%, dilution of 8%, and cut‐off grade
of 30 g/t silver.
CAUTIONARY NOTE REGARDING FORWARD‐LOOKING INFORMATION
Certain of the statements and information in this news release constitute “forward‐looking statements” within the meaning of
the United States Private Securities Litigation Reform Act of 1995 and “forward‐looking information” within the meaning of
applicable Canadian provincial securities laws. Any statements or information that express or involve discussions with respect to
predictions, expectations, beliefs, plans, projections, objectives, assumptions, or future events or performance (often, but not
always, using words or phrases such as “expects”, “is expected”, “anticipates”, “believes”, “plans”, “projects”, “estimates”,
“assumes”, “intends”, “strategies”, “targets”, “goals”, “forecasts”, “objectives”, “budgets”, “schedules”, “potential” or variations
thereof or stating that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved,
or the negative of any of these terms and similar expressions) are not statements of historical fact and may be forward‐looking
statements or information. Such statements include, but are not limited to: statements regarding anticipated exploration, drilling,
development, construction, and other activities or achievements of the Company; timing of receipt of permits and regulatory
approvals; and estimates of the Company’s revenues and capital expenditures; and other future plans, objectives or expectations
of the Company.
Forward‐looking statements or information are subject to a variety of known and unknown risks, uncertainties and other factors
that could cause actual events or results to differ from those reflected in the forward‐looking statements or information, including,
without limitation, risks relating to: global economic and social impact of COVID‐19; fluctuating equity prices, bond prices,
commodity prices; calculation of resources, reserves and mineralization, general economic conditions, foreign exchange risks,
interest rate risk, foreign investment risk; loss of key personnel; conflicts of interest; dependence on management, uncertainties
relating to the availability and costs of financing needed in the future, environmental risks, operations and political conditions,
the regulatory environment in Bolivia and Canada; risks associated with community relations and corporate social responsibility,
and other factors described under the heading “Risk Factors” in the Company’s Annual Information Form for the year ended June
30, 2022 and its other public filings.
This list is not exhaustive of the factors that may affect any of the Company’s forward‐looking statements or information.
The forward‐looking statements are necessarily based on a number of estimates, assumptions, beliefs, expectations and opinions
of management as of the date of this news release that, while considered reasonable by management, are inherently subject to
significant business, economic and competitive uncertainties and contingencies. These estimates, assumptions, beliefs,
expectations and options include, but are not limited to, those related to the Company’s ability to carry on current and future
operations, including: the duration and effects of COVID‐19 on our operations and workforce; development and exploration
activities; the timing, extent, duration and economic viability of such operations; the accuracy and reliability of estimates,
projections, forecasts, studies and assessments; the Company’s ability to meet or achieve estimates, projections and forecasts;
the stabilization of the political climate in Bolivia; the Company’s ability to obtain and maintain social license at its mineral
properties; the availability and cost of inputs; the price and market for outputs; foreign exchange rates; taxation levels; the timely
receipt of necessary approvals or permits, including the ratification and approval of the Mining Production Contract with COMIBOL
by the Plurinational Legislative Assembly of Bolivia; the ability of the Company’s Bolivian partner to convert the exploration
licenses at the Carangas Project to AMC; the ability to meet current and future obligations; the ability to obtain timely financing
on reasonable terms when required; the current and future social, economic and political conditions; and other assumptions and
factors generally associated with the mining industry.
Although the forward‐looking statements contained in this news release are based upon what management believes are
reasonable assumptions, there can be no assurance that actual results will be consistent with these forward‐looking statements.
All forward‐looking statements in this news release are qualified by these cautionary statements. Accordingly, readers should not
place undue reliance on such statements. Other than specifically required by applicable laws, the Company is under no obligation
and expressly disclaims any such obligation to update or alter the forward‐looking statements whether as a result of new
information, future events or otherwise except as may be required by law. These forward‐looking statements are made as of the
date of this news release.
CAUTIONARY NOTE TO US INVESTORS
This news release has been prepared in accordance with the requirements of the securities laws in effect in Canada which differ
from the requirements of United States securities laws. The technical and scientific information contained herein has been
prepared in accordance with NI 43‐101, which differs from the standards adopted by the U.S. Securities and Exchange Commission
(the “SEC”). Accordingly, the technical and scientific information contained herein, including any estimates of mineral reserves
and mineral resources, may not be comparable to similar information disclosed by U.S. companies subject to the disclosure
requirements of the SEC.
Additional information relating to the Company, including the Company’s Annual Information Form, can be obtained under the
Company’s profile on SEDAR at www.sedar.com, on EDGAR at www.sec.gov, and on the Company’s website at
www.newpacificmetals.com.