New Pacific Announces Expanded Discovery Drill Program at the Carangas Silver Project Additional drill rigs mobilized to complete ~7,500 metres of drilling by year-end
Page 1
NEWS RELEASE
New Pacific Announces Expanded Discovery Drill Program at the
Carangas Silver Project
Additional drill rigs mobilized to complete ~7,500 metres of drilling by year-end
VANCOUVER, BRITISH COLUMBIA – OCTOBER 26, 2021 – New Pacific Metals Corp. (“New
Pacific” or the “Company”) (TSX:NUAG; NYSE American: NEWP), together with its local Bolivian
partner, announces that two additional drill rigs have been mobilized and the discovery d rill
program has been expanded for the Carangas Silver Project, Oruro Department, Bolivia (the
“Carangas Project”). The expanded drill program (the “Phase II Drill Program”) includes a total of
three drill rigs and is expected to complete an additional minimum of 7,500 metres (“m”) of
diamond drilling by the end of 2021.
Target generation, which was carried out prior to the Phase I discovery drill program (the “Phase
I Drill Program”), defined a near-surface, structurally controlled, bulk tonnage, exploration target,
centered on and adjacent to extensive historic workings. These historic workings exploited narrow,
high grade silver polymetallic veins (please refer to the Company’s news releases dated April 12,
2021 and June 14, 2021). The Phase I D rill Program commenced in late June 2021 and was
recently completed (for details on the drill program, please refer to the Company’s news release
dated June 29, 2021).
PHASE I DRILL PROGRAM HIGHLIGHTS:
3,790 m completed in 13 drill holes: A ll drill holes intersected thick intervals of
predominantly fracture-controlled, volcanic breccia and/or dacitic tuff-hosted, polymetallic
mineralization, defined by detailed geological logging and real-time, X-Ray Fluorescence
analysis (utilizing a Niton XRF) (Figure 1);
Assay results for the first two drill holes are consistent with the exploration thesis
for bulk tonnage, high grade silver mineralization: Results returned broad zones of
silver-rich polymetallic mineralization with higher grade intervals present (for details please
see the Company’s news release dated September 8, 2021);
Drilling to date appears to define large, mineralized area: While assays are pending,
the drill holes completed during the Phase I Drill Program appear to define a mineralized
area approximately 1,000 m long by 700 m wide and up to 400 m in depth (Figure 1); and
Page 2
Mineralization is open at depth: Mineralization remains open in every direction,
including at depth, beyond the current drill footprint . Many drill holes were terminated in
mineralization due to drill rig constraints.
PHASE II DRILL PROGRAM
As a result of the Phase I Drill Program highlights , two additional drill rigs have been mobilized
and a Phase II Drill Program has been initiated to further define the extent of the large, emerging,
mineralized system.
The Phase II Drill Program will comprise approximately 7,500 m in 26 drill holes (Figure 1), and
contingent on positive results, may be expanded. The core processing facilities at the Carangas
Project and the technical team have been expanded accordingly.
Figure 1. Simplified geology plan map and drill holes of the completed Phase I Discovery Drill
Program and the planned Phase II Drill Program at the Carangas Project.
QUALITY ASSURANCE AND QUALITY CONTROL
All samples in respect of the exploration program at the Carangas Project, conducted by the
Company and discussed in this news release, are shipped in securely-sealed bags by New Pacific
Page 3
staff in the Company’s vehicles, directly from the field to ALS Global in Oruro, Bolivia for
preparation, and ALS Global in Lima, Peru for geochemical analysis. ALS Global is an ISO 17025
accredited laboratory independent from New Pacific. All samples are first analyzed by a multi -
element ICP package (ALS code ME -MS41) with ore grade over specified limits for silver, lead
and zinc further analyzed using ALS code OG46. Further silver samples over specified limits are
analyzed by gravimetric analysis (ALS code of GRA21). Certified reference materials, various
types of blank samples and duplicate samples are inserted to normal drill core sample sequences
prior to delivery to laboratory for preparation and analysis. The overall ratio of quality control
samples in sample sequences is around twenty percent.
QUALIFIED PERSON
The scientific and technical information contained in this news release has been reviewed and
approved by Alex Zhang, P. Geo., Vice President of Exploration, who is a Qualified Person for
the purposes of National Instrument 43-101 — Standards of Disclosure for Mineral Projects (“NI
43- 101”). The Qualified Person has verified the information disclosed herein, including the
sampling, preparation, security and analytical procedures underlying such information, and is not
aware of any significant risks and uncertai nties that could be expected to affect the reliability or
confidence in the information discussed herein.
ABOUT NEW PACIFIC
New Pacific is a Canadian exploration and development company with precious metal projects,
including the flagship Silver Sand Project, the Silverstrike Project and the Carangas Project, all of
which are located in Bolivia. The Company is focused on progressing the development of the
Silver Sand Project, while growing its Mineral Resources through the exploration and acquisition
of properties in the Americas.
For further information, please contact:
Stacey Pavlova, CFA
VP, Investor Relations and Corporate Communications
New Pacific Metals Corp.
Phone: (604) 633-1368
U.S. & Canada toll-free: 1-877-631-0593
E-mail: [email protected]
www.newpacificmetals.com
To receive company news by e- mail, please register using New Pacific’s website at
www.newpacificmetals.com.
CAUTIONARY NOTE REGARDING FORWARD-LOOKING INFORMATION
Certain of the statements and information in this news release constitute “forward-looking statements” within the
meaning of the United States Private Securities Litigation Reform Act of 1995 and “forward-looking information” within
the meaning of applicable Canadian provincial securities laws. Any statements or information that express or involve
discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future
Page 4
events or performance (often, but not always, using words or phrases such as “expects”, “is expected”, “anticipates”,
“believes”, “plans”, “projects”, “estimates”, “assumes”, “intends”, “strategies”, “targets”, “goals”, “forecasts”, “objectives”,
“budgets”, “schedules”, “potential” or variations thereof or stating that certain actions, events or results “may”, “could”,
“would”, “might” or “will” be taken, occur or be achieved, or the negative of any of these terms and similar expressions)
are not statements of historical fact and may be forward- looking statements or information. Such statements include,
but are not limited to: statements regarding anticipated exploration, drilling, development, construction, and other
activities or achievements of the Company; timing of receipt of permits and regulatory approvals; and estimates of the
Company’s revenues and capital expenditures.
Forward-looking statements or information are subject to a variety of known and unknown risks, uncertainties and other
factors that could cause actual events or results to differ from those reflected in the forward-looking statements or
information, including, without limitation, risks relating to: global economic and social impact of COVID -19; fluctuating
equity prices, bond prices, commodity prices; calculation of resources, reserves and mineralization, general economic
conditions, foreign exchange risks, interest rate risk, foreign investment risk; loss of key personnel; conflicts of interest;
dependence on management, uncertainties relating to the availability and costs of financing needed in the future,
environmental risks, operations and political conditions, the regulatory environment in Bolivia and Canada, risks
associated with community relations and corporate social responsibility, and other factors described under the heading
“Risk Factors” in the Company’s Annual Information Form and its other public filings. This list is not exhaustive of the
factors that may affect any of the Company’s forward-looking statements or information.
The forward-looking statements are necessarily based on a number of estimates, assumptions, beliefs, expectations
and opinions of management as of the date of this news release that, while considered reasonable by management,
are inherently subject to significant business, economic and competitive uncertainties and contingencies. These
estimates, assumptions, beliefs, expectations and options include, but are not limited to, those related to the Company’s
ability to carry on current and future operations, including: the duration and effects of COVID-19 on our operations and
workforce; development and exploration activities; the timing, extent, duration and economic viability of such operations;
the accuracy and reliability of estimates, projections, forecasts, studies and assessments; the Company’s ability to
meet or achieve estimates, projections and forecasts; the stabilization of the political climate in Bolivia; the Company’s
ability to obtain and maintain social license at its mineral properties; the availability and cost of inputs; the price and
market for outputs; foreign exchange rates; taxation levels; the timel y receipt of necessary approvals or permits,
including the ratification and approval of the Mining Production Contract with COMIBOL by the Plurinational Legislative
Assembly of Bolivia; the approval of the mining association agreement for the Silverstrike Project by AJAM; the ability
of the Company to convert the exploration licenses at the Carangas Project to AMC ; the ability to meet current and
future obligations; the ability to obtain timely financing on reasonable terms when required; the current and future social,
economic and political conditions; and other assumptions and factors generally associated with the mining industry.
Although the forward-looking statements contained in this news release are based upon what management believes
are reasonable assumptions, there can be no assurance that actual results will be consistent with these forward-looking
statements. All forward -looking statements in this news release are qualified by these cautionary statements.
Accordingly, readers should not place undue reliance on such statements. Other than specifically required by applicable
laws, the Company is under no obligation and expressly disclaims any such obligation to update or alter the forward-
looking statements whether as a result of new information, future events or otherwise except as may be required by
law. These forward-looking statements are made as of the date of this news release.
CAUTIONARY NOTE TO US INVESTORS
The disclosure in this news release and referred to herein was prepared in accordance with NI 43-101 which differs
significantly from the requirements of the U.S. Securities and Exchange Commi ssion (the "SEC"). The terms “proven
mineral reserve”, “probable mineral reserve” and “mineral reserves” used in this news release are in reference to the
mining terms defined in the Canadian Institute of Mining, Metallurgy and Petroleum Standards (the “C IM Definition
Standards”), which definitions have been adopted by NI 43-101. Accordingly, information contained in this news
release providing descriptions of our mineral deposits in accordance with NI 43-101 may not be comparable to similar
information made public by other U.S. companies subject to the United States federal securities laws and the rules and
regulations thereunder.
Page 5
Investors are cautioned not to assume that any part or all of mineral resources will ever be converted into reserves.
Pursuant to CIM Definition Standards, “Inferred mineral resources” are that part of a mineral resource for which quantity
and grade or quality are estimated on the basis of limited geological evidence and sampling. Such geological evidence
is sufficient to imply but not verify geological and grade or quality continuity. An inferred mineral resource has a lower
level of confidence than that applying to an indicated mineral resource and must not be converted to a mineral reserve.
However, it is reasonably expecte d that the majority of inferred mineral resources could be upgraded to indicated
mineral resources with continued exploration. Under Canadian rules, estimates of inferred mineral resources may not
form the basis of feasibility or pre-feasibility studies, except in rare cases. Investors are cautioned not to assume that
all or any part of an inferred mineral resource is economically or legally mineable. Disclosure of “contained ounces” in
a resource is permitted disclosure under Canadian regulations; howev er, the SEC normally only permits issuers to
report mineralization that does not constitute “reserves” by SEC standards as in place tonnage and grade without
reference to unit measures.
Canadian standards, including the CIM Definition Standards and NI 43- 101, differ significantly from standards in the
SEC Industry Guide 7. Effective February 25, 2019, the SEC adopted new mining disclosure rules under subpart 1300
of Regulation S -K of the United States Securities Act of 1933, as amended (the “SEC Moderniz ation Rules”), with
compliance required for the first fiscal year beginning on or after January 1, 2021. The SEC Modernization Rules
replace the historical property disclosure requirements included in SEC Industry Guide 7. As a result of the adoption
of the SEC Modernization Rules, the SEC now recognizes estimates of “Measured Mineral Resources”, “Indicated
Mineral Resources” and “Inferred Mineral Resources”. In addition, the SEC has amended its definitions of “Proven
Mineral Reserves” and “Probable Mineral Reserves” to be substantially similar to corresponding definitions under the
CIM Definition Standards. During the period leading up to the compliance date of the SEC Modernization Rules,
information regarding mineral resources or reserves contained or referenced in this news release may not be
comparable to similar information made public by companies that report according to U.S. standards. While the SEC
Modernization Rules are purported to be “substantially similar” to the CIM Definition Standards, readers are cautioned
that there are differences between the SEC Modernization Rules and the CIM Definitions Standards. Accordingly, there
is no assurance any mineral reserves or mineral resources that the Company may report as “proven mineral reserves”,
“probable mineral reserves”, “measured mineral resources”, “indicated mineral resources” and “inferred mineral
resources” under NI 43-101 would be the same had the Company prepared the reserve or resource estimates under
the standards adopted under the SEC Modernization Rules.