Canada Cobalt Drills into High-Grade Gold, Cobalt, Silver and Nickel at Castle Mine

Canada Cobalt Drills into High-Grade Gold,

Cobalt, Silver and Nickel at Castle Mine

COQUITLAM, BC

,

Jan. 3, 2020

/CNW/ - Canada Cobalt Works Inc. (TSXV: CCW) (OTC: CCWOF)

(

Frankfurt

: 4T9B) (the "Company" or "Canada Cobalt") is pleased to announce that initial assay

results from multi-directional and very short underground drill holes on the western side of the Castle

mine have revealed unexpected high-grade gold in addition to more high-grade cobalt, silver and

nickel. This is now considered an emerging new discovery area open for considerable potential

expansion with easily accessible mineralization from the first level near the adit entrance.

With Canada Cobalt soon to be vertically integrated through its pending acquisition of the only facility

in the Northern Ontario Silver-Cobalt district that combines bullion pouring, bulk sampling,

commercial assaying and e-waste processing, these latest results support the Company's enhanced

strategic options to fully unlock the value of the 11-level Castle mine and very prospective material

left in the stopes and adjacent to the mine as a result of historic production. Silver was the primary

focus of previous operators who used a very high silver cut-off grade and bypassed cobalt-rich veins

with less apparent silver while gold and nickel potential were ignored.

Highlights:

22.7

g/t Au and

1.03

% Co in drill hole C-U-19-016 from

3.3m

to

3.6m

within a broader 2.4-m

core interval grading

5.8

g/t Au and 0.78% Co (

2.4m

to

4.8m

, drilled upward toward the

surface);

10.8 g/t Au

and

3.4

% Co in drill hole C-U-19-005 from

0.67m

to

1m

within

1.33m

(

0.67m

to

2.0m

) grading 3.7 g/t Au and 1.3% Co (drilled down into the floor, collared approximately

4m

west and

4.3m

south of C-U-19-016);

4,970

g/t Ag (

144.9

oz/ton) and 0.40% Co (

1.2m

to

1.8m

),

1.6

% Co and

1.1

% Ni (

1.8m

to

2.4m

) and

2.9

% Co,

3.7

% Ni and

0.89

g/t Au (

4.8m

to

5.4m

), all in drill hole C-U-19-006 (drilled

down into the floor from the same set-up as C-U-19-005 but intersecting a different part of the

vein);

3.2

% Co, 102 g/t Ag and

3.0

% Ni from

0.9m

to

1.2m

in drill hole C-U-19-002 within

1.5m

(

0m

to

1.5m

) grading

1.7

% Co and

1.6

% Ni (drilled down into the floor from the same set-up as holes

#5 and #6 but at a different angle);

Cobalt mineralization was intersected in 13 out of the 16 holes included in this release with 7 of

those short test holes returning intervals >1% cobalt. Cobalt grades reported from the first level

of the Castle mine, previously only exploited for its native silver, are considered very high in a

global context.

Matt Halliday

, Canada Cobalt VP-Exploration, commented: "The presence of gold in gabbro

(diabase) vein structures, open toward the surface and at depth, is extremely intriguing. Through

some immediate lab work we will better understand what this gold is associated with in preparation

for aggressive follow-up. Gold content bodes very well for our underground model. Also, this gives

fresh impetus to our drive to find a high-grade gold system in the heavily under-explored Archean

rocks, a very favorable host for gold, adjacent to our new high-grade silver discovery at Castle East

1.9 km from Shaft #3. These are exciting times for our geological team.

"We eagerly anticipate updating shareholders with respect to the Castle East discovery where

drilling is scheduled to resume

Monday, January 6

, with a second and larger batch of assays

expected from the lab during this first half of the month," Halliday concluded.

This news release includes highlights of significant results from the first 16 holes of 47 completed to

date (228.5 meters) that have further tested parts of a large vein exposed over 80 meters on the

mine's first level, associated with at least three sub-parallel veins. Assays are core lengths (true

widths unknown at this time) and show good continuity of mineralization (refer to

CanadaCobaltWorks.com

for assay table). The depth extension of this major vein has yet to be

determined while other mineralized vein structures on the expansive first level (365 meters east-west

and 360 meters north-south) are also a priority during this second phase of drilling to follow up on

the success of the first-ever underground program in 2018. More assay results will be released after

they are received, verified and interpreted.

Quality Control/Assurance

The underground drilling program and sampling protocol are being managed by geologists from

GoldMinds Geoservices. Holes were drilled from eight setups using AQ diameter drill core. Samples

were collected using a 0.3-meter average length, 1.5-meter maximum length. Drill core recovery

averaged 95%. Two quality control samples (blank and standards) were inserted into each batch of

around 20 samples. The drill core was separated into two parts using the hydraulic splitter with one

half of the split core placed in a plastic bag with the sample tag and sealed, while the second half

was returned to the core box for storage on site.

All AQ core assays reported were assayed at ALS laboratory at

Rouyn-Noranda

by crushing 70%

<2mm then pulverized to 85% passing 75 micrometers. Au, Pt and Pd determination was by fire

assay on a 30-gram sample of the pulverized sample and ICP-AES. The high-grade Au samples

were determined with a gravimetric finish. All samples were also analyzed for multi-elements, using

an Aqua Regia digestion and ICP-AES method (Co, Ni and Ag). Ag samples returning over limit

values were re-run using a gravimetric finish.

Qualified Person

The technical information in this news release was prepared under the supervision of Mr.

Merouane

Rachidi

, Ph.D., P.Geo., (APGO, APEGNB and OGQ) of GoldMinds Geoservices, a qualified person

in accordance with National Instrument 43-101.

About Canada Cobalt Works Inc.

Canada Cobalt has 100% ownership of the Castle mine and the 78 sq. km Castle Property with

strong exploration upside in the prolific past producing

Gowganda

high-grade Silver Camp of

Northern Ontario. With underground access at Castle, a pilot plant to produce cobalt-rich gravity

concentrates on site, and a proprietary hydrometallurgical process known as Re-2OX for the

creation of technical grade cobalt sulphate as well as nickel-manganese-cobalt (NMC) formulations,

Canada Cobalt is strategically positioned to become a vertically integrated North American leader in

cobalt extraction and recovery while it also exploits a powerful new silver-gold market cycle.

"Frank J. Basa"

Frank J. Basa

, P. Eng.

President and Chief Executive Officer

Neither the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in the

policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this

release. This news release may contain forward-looking statements including but not limited to

comments regarding the timing and content of upcoming work programs, geological interpretations,

receipt of property titles, potential mineral recovery processes, etc. Forward-looking statements

address future events and conditions and therefore, involve inherent risks and uncertainties. Actual

results may differ materially from those currently anticipated in such statements.

SOURCE

Canada Cobalt Works Inc.

View original content:

http://www.newswire.ca/en/releases/archive/January2020/03/c4261.html

%SEDAR: 00022378E

For further information:

Frank J. Basa, P.Eng., President and CEO, 1-416-625-2342; Marc

Bamber, Director, [email protected], +44-7725-960939

CO: Canada Cobalt Works Inc.

CNW 07:30e 03-JAN-20