Nicola Mining Announces Positive Reverse Circulation Drilling Results on Historic Wastepiles
Nicola Mining Announces Positive Reverse Circulation
Drilling Results on Historic Wastepiles
Vancouver, British Columbia--(Newsfile Corp. - August 10, 2018) - Nicola Mining Inc. (TSXV: NIM) (the "
Company
") is pleased
to announce results on its 20-hole Phase 1 Reverse Circulation drill program ("Phase 1 RC Program") completed between May
23 to June 8, 2018, at its wholly-owned New Craigmont Project, located near Merritt, British Columbia.
The Phase 1 RC Program provides a simple overview of copper grade and sectional volume of the approximate 80-90 million-
tonne historical wastepile surrounding the Craigmont Mine pit, as well as insight if any sections merited further exploration.
The
Phase 1 RC Program also added to positive 3060-Portal RC drill results, as announced in the September 26, 2017, news
release.
Given that the wastepile material was placed in benches, there would be no direct mining costs associated with
production.
Assay results from the drill program are summarized in Diagram 1.
Highlights of the results include:
An average
grade
of 2
463
ppm Cu (0.2
5
% Cu)
over 40 metres
for
the deepest RC hole in the program
(CC-RC-
18-12)
Indication of
potential
high
-
grade
Cu mineralization
in
the
southern
side of the waste pile
s
that is believed to
also contain the greatest volume
On October 3, 2016, the Company announced that it had entered into an Exploration and Material Purchase Agreement with
Teck Highland Valley Copper Partnership ("HVCP"), a wholly owned subsidiary of Teck Resources Limited, involving mine strip
material (refer to Oct. 3, 2016, news release) surrounding the historic Craigmont open pit.
A clear zone of interest has been found in the largest volume section of the wastepiles, which is located on the southern side of
the pit.
The Phase 1 RC program found the south-central quadrant contains the thickest and most potentially economic grade for
the waste piles.
Results have warranted a follow up program ("Phase 2 Program") to delineate copper mineralization and trace
the extent of the higher grading material within the waste piles. The Company recognizes that an approximate 100-hole Phase 2
Program will provide only conceptual quantity and grades and will be insufficient data to complete a NI 43-101 resource. Phase
2 will, however, be able to provide insight into approximate in-situ calculations based on volume and grade.
The Phase 2
Program will include additional holes at Portal 3060 which were not completed during the 2017 exploration program.
The
Company has the funds to complete the entire Phase 2
DrillingProgram.
Figure 1: Map of 20-Hole Phase 1 RC Program Hole Locations
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/4873/38012_a1533854944141_12.jpg
Figure 2: Map of 20-Hole Phase 1 RC Program Results and Zone and Phase 2 Target
To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/4873/38012_a1533854945469_6.jpg
Peter Espig, Chief Executive Officer of the Company, commented, "The Phase 1 RC Program proved extremely valuable, as it
provides us with insight into the significant potential of the mine strip material surrounding the historic pit.
We are encouraged
that grading of the wastepiles are associated with location and not depth, which limits waste rock and allows the Company to
focus on the eastern side of the historic pit.
In addition, because the largest cost of mining, which includes engineering,
infrastructure, surveying and blasting have all been incurred, the value of the wastepile is significant and warrants a follow up
Phase 2 Program.
Quality Control
The Company implemented a quality control program for this program to ensure best practices are utilized for sample collection
and analysis of RC cuttings.
Samples were collected at 2.0 m intervals down hole with lithology, alteration and mineralization
documented for each interval. Quality control measures include insertion of standards and duplicates into the sample stream at a
frequency of 1 blank and 1 standard for every group of 20 samples, and field duplicates at a rate of 3 per 100 samples.
Activation Laboratory (ISO 17025 Certified) in Kamloops, British Columbia, conducted sample analysis using ICP Aqua Regia
38-element (IE3) and fire assay gold (IA2) packages. Certified reference standards and rock blanks were placed in the sample
stream with a ratio of approximately one sample out of 10.
Qualified Person
Kevin Wells, P.Geo, a consulting geologist to the Company, is the independent qualified person as defined by National
Instrument 43-101 -
Standards of Disclosure for Mineral Projects
for the technical disclosure contained in this news release.
About Nicola Mining
Nicola Mining Inc. is a junior mining company listed on the TSX Venture Exchange and is in the process of recommencing mill
feed processing operations at its 100% owned state-of-the-art mill and tailings facility, located near Merritt, British Columbia. It
has already signed four mill profit share agreements with high grade gold producers. The fully-permitted mill can process both
gold and silver mill feed via gravity and flotation processes. The Company also owns 100% of Treasure Mountain, a high-grade
silver property, and an active gravel pit that is located adjacent to its milling operations.
About New Craigmont
The New Craigmont Project (the "
Property
") is a wholly-owned copper property with an active mine permit (M-68), located
within the world-class Highland Valley porphyry district. It benefits from excellent infrastructure. The Property is at the corner
intersection of the Nicola and Guichon batholiths, of which the latter is the precursor to mineralization at Highland Valley. In
November of 2015, Nicola became the first group in decades to consolidate ownership of the Property, and has been actively
conducting mineral exploration since.
There are currently no mineral resource estimates on the Property. Historical "non-NI 43-101" resource calculations are
recorded in internal memos and geological reports for Placer Development. An internal memo written by J.F. Bristow on October
30, 1985, to Craigmont Mines Ltd. reported a zone known as Body No. 3 containing a historic estimate of 1,290,000 tons
(1,170,268 metric tonnes) of copper grading 1.53% copper. * This estimate assumes a 0.7% copper cut-off and a 20-foot
mining width between drill sections 6565E and 8015E. The material in Body No. 3 contains mineralization primarily in silicate-
rich rocks.
Additionally, J.F. Bristow reported in an internal memo on July 22, 1985, to Craigmont Mines Ltd. a rough calculation of
+60,000,000 pounds (1.6 million short tons or 1.45 metric tonnes) of +1.5% copper from an original ore estimate of 27,754,000
short tons (25,178,005 metric tonnes) of copper grading 1.79% copper left behind in the sub-level cave. The material is from the
previously mined out No.1 Body and No.2 Body.
It should be noted that these historical estimates do not meet the requirements needed to conform to National Instrument 43-101
standards. The Company notes that an independent Qualified Person has not done sufficient work to verify and classify the
historical estimates as current mineral resources and is therefore not treating the historical estimates as current mineral
resources or mineral reserves. For further details on the Property, see the technical report entitled "TECHNICAL REPORT on
the THULE COPPER — IRON PROPERTY, Southern British Columbia, Canada," filed on May 8, 2013, on Sedar at
www.sedar.com
.
On behalf of the Board of Directors
"
Peter Espig
"
Peter Espig
CEO & Director
For additional information contact
:
Peter Espig
Telephone: (778) 385-1213
Email:
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the
TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.