Class 1 Surface Samples confirm high grade mineralization; Assays validate historic Nickel-Copper-Cobalt-Platinum-Palladium
Class 1 Surface Samples confirm high grade mineralization;
Assays validate historic Nickel-Copper-Cobalt-Platinum-Palladium
Toronto, ON, August 27, 2020: Class 1 Nickel & Technologies Limited (“Class 1 Nickel” or the
“Company”) (CSE: NICO), a Canadian company developing nickel-copper-cobalt sulphide Mineral
Resources near Timmins, Ontario, is pleased to announce that a verification and review report has
been submitted to the Company which has confirmed the existence of high grade mineralization
from surface samples.
Mr. Martin Tuchscherer, P.Geo, PhD, Specialist Geological Technical Advisor to Class 1 Nickel,
recently completed an initial site visit and verification review program at the Alexo-Dundonald Project
with three purposes: (i) confirm the Ni-Cu-PGE mineralization at the Alexo and Kelex open pits; (ii) to
review and re-sample mineralized core; and (iii) to confirm the location of old diamond drill hole collars.
Mr. Benjamin H Cooper, President of Class 1 Nickel indicated that: “The Company engaged Tascan
Geosciences Inc. to review the project sites, take samples of previously blasted rocks from around the
Alexo and Kelex open pits as well as around the Dundonald high grade historical resource and the PGE
occurrences to the east. The results confirm the rock types and the high grade nature of the magmatic
sulphide mineralization.”
The company is proud to have retained the services of Martin Tuchscherer who has worked as a senior
geologist with Canadian Royalties Inc. for five years.
Initial Site Visit Highlights:
Grab samples taken from old mineralized piles at the Alexo and Kelex open pits confirm the
high-grade nickel and platinum group elements (PGEs) abundances and tenor of these deposits
Re-sampled core confirms the high nickel and high PGE contents of the Dundonald South
Deposit
Re-sampling of old Dundonald South core also confirmed the reproducibility of nickel (Ni),
copper (Cu) and cobalt (Co) mineralization from historical work
Geochemical results confirm samples taken from the Dundonald Beach and Dundonald South
Deposit follow a mineralized komatiite trend
Geochemical results for samples taken at Alexo, Kelex, Dundonald Beach and Dundonald South
suggest that most samples formed in a dynamic, likely channelized komatiitic setting
A total of 38 samples were collected over a three-day period on the Alexo-Dundonald Project. These
samples were submitted to ALS Canada Ltd. laboratories in Val-d’Or and Sudbury. Grab samples were
sourced from surface ore boulders from the Alexo and Kelex open pits that are believed to originate
from high grade mineralized material piles that were mostly processed and smelted in Sudbury.
Samples were also collected from previously sampled historic drill core and from surface showings from
Dundonald Beach, Mighty PGE showing and from outcrops from the Casey PGE showing areas.
Mineralized samples taken from the Alexo open pit have nickel grades ranging between 2.33% and
5.85% Ni. Mineralized samples from the Kelex open pit have nickel grades ranging between 0.988%
and 5.55% Ni.
Analytical results from the eight core samples show a range in nickel grades from 1.02% Ni to 20.9%
Ni.
Samples with less than 7% Sulphur (S) have major element compositions indicating a range from
komatiite to komatiitic basalt.
Mr. Martin Tuchscherer states in his report:
A plot of Chromium versus Nickel (derived from Brand, 1999) indicates that samples (0.2 to 2.0
%Ni) from the Dundonald Beach, Kelex and Dundonald South show an increasing nickel content
that follow the “mineralized komatiite trend” – that is, these samples likely formed in a highly
prospective komatiitic channelized setting. Samples that contain >2.0% Ni are obviously
mineralized and do not plot on this diagram.
A plot of Cu/Pd versus Pd (derived from Karykowski et al., 2017) indicates that mineralized
samples from Dundonald Beach, Alexo, Kelex and Dundonald South correspond to high R factor
values, typical of mineralization formed in a dynamic channelized setting.
Exact Ni tenors cannot be calculated, since the S values exceed the analytical maximum,
however, a sample result of up to 20.9% Ni was observed that indicating extremely high Ni
tenors.
In conjunction with these findings Class 1 Nickel now intends to engage industry experts to update
the current NI 43-101 Technical Report to include the Dundonald Deposits, that are currently
historical in nature.
Class 1 is developing two projects simultaneously on its 20km2 Timmins property. The Alexo-Kelex
Project with an NI 43-101 Nickel Sulphide Mineral Resource open at depth and along strike situated in
the northern part of the property area. The Dundonald North and South Projects are situated in the
southern part of the Property area.
Previous drilling at Dundonald South has outlined eight east-west nickel-bearing sulphide zones (A-H)
defined at shallow levels (>200 metres depth). Most of the lenses are open at depth and along strike.
Historical Mineral Resources of 750,000 tonnes at 1.50% nickel sulphide reported by Falconbridge have
been estimated in the past. Fresh, high grade Ni-Cu-PGE sulphide mineralization has been trenched at
surface by Hucamp Mines. A selected Hucamp Mines sample of the mineralization returned 34.82% Ni,
0.30% Co, 3.7 g/t Pt, 5.8g/t Pd, 0.90 g/t Au, 0.44 g/t Os, 0.47 g/t Ir, 0.84 g/t Rh and 2.4 g/t Ru.
The Dundonald North is a nickel zone located on the north side of a west-plunging antiform, 2.2 km
southeast and along strike from the Alexo Deposit. The zone has been traced along strike for 800 m
and to a depth of 700 metres below surface with the best mineralized intersections in the centre of the
channel (with historical grades up to 3.04% Ni).
Class 1 Nickel has not done sufficient work to validate or classify the historical grades at the Dundonald
Project. The historical grades are not NI 43-101 compliant and should not be relied on by investors.
Webinar Update:
Class 1 Nickel will be hosting a webinar with Amvest Capital on Thursday August 27, 2020 at 4:05 pm
Eastern time (1:05 pm Pacific time). This will be a great opportunity to listen to Class 1 Nickel’s
President and CEO, Benjamin Cooper. Listeners also can ask questions from Class 1 Nickel’s
management. To register for the webinar (and have access to the replay) please go to:
https://attendee.gotowebinar.com/register/7612978237820978703?source=co.
Qualified Person
The technical information in this news release has been prepared in accordance with Canadian
regulatory requirements as set out in NI 43-101 and reviewed and approved by Eugene Puritch, P.Eng.,
a Qualified Person as defined by NI 43-101.
About Class 1 Nickel & Technologies Limited
Class 1 Nickel & Technologies Limited (CSE: NICO) is a Mineral Resource company focused on
the development of its 100% owned Alexo-Dundonald Project, an advanced portfolio of komatiite
hosted magmatic nickel-copper-cobalt sulphide projects located near Timmins, Ontario.
For more information, please contact:
Benjamin Cooper, President
T: 416.454.0166
For additional information please visit our new website at www.class1nickel.com and our Twitter feed:
@ClassNickel.
This news release contains forward-looking information which is not comprised of historical facts.
Forward-looking information is characterized by words such as “plan”, “expect”, “project”, “intend”,
“believe”, “anticipate”, “estimate” and other similar words, or statements that certain events or
conditions “may” or “will” occur. Forward-looking information involves risks, uncertainties and other
factors that could cause actual events, results, and opportunities to differ materially from those
expressed or implied by such forward-looking information. Factors that could cause actual results to
differ materially from such forward-looking information include, but are not limited to, changes in the
state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required
regulatory or governmental approvals, and other risks involved in the mineral exploration and
development industry, including those risks set out in the Company’s management’s discussion and
analysis as filed under the Company’s profile at www.sedar.com. Forward-looking information in this
news release is based on the opinions and assumptions of management considered reasonable as of
the date hereof, including that all necessary governmental and regulatory approvals will be received as
and when expected. Although the Company believes that the assumptions and factors used in
preparing the forward-looking information in this news release are reasonable, undue reliance should
not be placed on such information. The Company disclaims any intention or obligation to update or
revise any forward-looking information, other than as required by applicable securities laws.