Premium Nickel Resources Ltd. Reports Results of Selkirk Metallurgical Study, Identifies Significant PGE Content in Concentrate
Premium Nickel Resources Ltd. Reports
Results of Selkirk Metallurgical Study,
Identifies Significant PGE Content in
Concentrate
Toronto, Ontario--(Newsfile Corp. - August 24, 2022) -
Premium Nickel Resources Ltd.
(TSXV:
PNRL)
(formerly, North American Nickel Inc.) ("Premium Nickel" or the "Company")
is pleased
to report the results of the Company's 2021 metallurgical study completed at its 100% owned Selkirk
nickel-copper-cobalt- platinum group elements ("Ni-Cu-Co-PGE") sulphide Mine in Botswana.
The objective of this initial 2021 metallurgical study was to assess if readily marketable copper and
nickel concentrates could be produced and, if so, at what metal recovery levels.
The Selkirk test program
followed a similar program conducted on samples from the Selebi Mine, which demonstrated potential
for these metallurgical objectives to be achieved.
Highlights of the metallurgical study include:
Ability to produce salable market nickel and copper concentrates
Nickel concentrate grade of 10% nickel and 6% copper
Copper concentrate grade of 33% copper, 0.32% nickel
Recoveries of 63% nickel, 85% copper
Concentrates clean of deleterious elements and with low (<1%) MgO levels
Attractive amounts of PGE present in the concentrates
36.0 g/t Pd in copper concentrate
9.0 g/t Pd in nickel concentrate
Keith Morrison, CEO, commented:
"The results from the Selkirk metallurgical studies provide
important support for our re-development plan to produce separate copper and nickel-cobalt commercial
concentrates. Previous non-compliant economic studies at Selkirk by Tati Nickel Mining Company, were
based on the production of a low-grade concentrate that would be transported approximately 185
kilometres to the Phikwe smelter formerly operated by BCL. The closing of the BCL smelter in 2015 was
a primary contributor to the closure of the parastatal Ni-Cu-Co-PGE Tati Nickel Mining Company.
This metallurgical study was an important step for PNRL to determine the potential value of the Selkirk
deposit. This study also indicated the potential PGE content of the nickel and copper concentrates. We
will continue to run additional metallurgical testing as the project moves forward and apply data driven
best practices in all of our activities that are environmentally sound and that ultimately provide for a
sustainable future."
The Selkirk Mine is situated 28 kilometres south-east of the town of Francistown, and 75 kilometres
north of the Company's 100% owned Selebi Mine. The Selkirk Mine was acquired through an asset
purchase agreement with the Liquidator of Tati Nickel Mining Company (see news release dated August
22, 2022). In addition to the metallurgical sampling, the company has been collecting additional
information and conducting geological due diligence by examining the underground workings, reviewing
mineralized drill core, collecting DGPS coordinates of drill collars and data verification of information in
databases. The Company intends to include these findings in its NI 43-101 report expected to be
completed by the end of 2022.
Key results of the 2021 metallurgical study are summarized below.
Further details including sample
preparation, methodology, technical definitions and modal analyses, as well as liberation, association
and exposure characteristics can be found in the report of SGS Canada, a copy of which is available on
PNRL's website.
https://premiumnickelresources.ca/projects/botswana/selkirk-mine/overview/
Samples used for the 2021 metallurgical study were collected from 2016 core (HQ: 63.5mm), sawn in
half, and sent to SGS Canada in Lakefield, Ontario, where each sample was analyzed for nickel, copper
and sulphur for the purpose of creating the low and high-grade composite samples for metallurgical
testing.
At SGS Canada, low-grade composites and high-grade composites were prepared from semi
continuous intervals to represent potential open pit and underground ore types.
The low grade composite
had 36, ~1 metre intervals from 63.24 metre downhole to 136.37 metres while the high grade composite
had 20, ~1 metre intervals from 126.67 metres to 176.67 metres.
The grades of the two composites are
shown in Table 1.
Table 1:
Head assays for PNRL Test Program
Element
Unit
Low-Grade
Composites
High-Grade
Composites
Cu
%
0.55
0.66
Ni
%
0.44
0.77
Ni(s)
%
0.41
0.75
Fe
%
12.7
20.1
S
%
5.76
10.5
Si
%
16.3
13.4
Au
g/t
0.07
0.08
Pt
g/t
0.18
0.37
Pd
g/t
0.82
1.28
Rh
g/t
< 0.02
< 0.02
A subsample from each of the low-grade composite and the high-grade composite was submitted for
QEMSCAN (Quantitative Evaluation of Minerals by Scanning Electron Microscopy) mineralogy at a grind
size of 80% passing 129 μm and 99 μm, respectively.
The major sulphide minerals were identified as
chalcopyrite, pentlandite (Pn), pyrrhotite (Po), with trace amounts of pyrite.
About 80-85% of the nickel
was contained in pentlandite, and the remaining nickel 12-15% was mostly hosted by pyrrhotite in solid
solution.
Minor amounts of nickel (~3%) were hosted by non-sulphide gangue minerals.
The Po:Pn ratio
was ~ 10:1.
The liberation of chalcopyrite was good for both composites, with 74-83% free and liberated, but
pentlandite was poorly liberated, with 46-55% free and liberated, at the grind size submitted for
mineralogy.
Pentlandite liberation was poor above 53 microns and very good for the - 20 micron fraction.
The use of regrinding is critical to fully liberate flame pentlandite from pyrrhotite to maximize the nickel
recovery and grade.
A full suite of comminution tests were conducted on the 2 composites.
The Selkirk samples were
confirmed to be considered hard to very hard.
A limited number of batch tests were conducted prior to Locked Cycle Testing ("LCT") to demonstrate
the process and provide a metallurgical projection for the low grade sample.
The locked cycle test is a
series of batch laboratory tests conducted in sequence to simulate plant results.
Figures 2 and 3 shows
the LCT flow sheet and Table 2 shows the test results at each stage.
Figures may be viewed using
the link provided with this news release.
Nickel concentrate (combined Copper Rougher Scavenger Tails and Pyrrhotite 3rd Cleaner
Concentrate), having a grade of 10% nickel and containing approximately 6% copper, was achieved.
The nickel recovery was reasonably good at 63%.
The recovery of copper was reasonable, achieving 55% to the copper concentrate and 85% recovery
between the two concentrates.
High grade copper concentrate was achieved at 33% copper.
The low
nickel content (0.32% nickel) in the copper concentrate was also achievable.
Attractive amounts of platinum group elements were present in the concentrates with no obvious
deleterious elements.
The flotation test work also demonstrated that a Pyrrhotite Rougher Scavenger
Tailings with a low sulfur content (<1%) was achievable.
It is notable that this was a quickly executed test
program aimed at demonstrating what level of metallurgy may be possible.
Total recoveries are obtained by adding the distributions in the two concentrates.
Table 2. Combined LCT-4 and LCT-5 Results for the Selkirk Low-Grade Sample - Metallurgical
Projection
Product
Assay
Weight
%
Cu
%
Ni
%
S
%
Pt
g/t
Pd
g/t
Au
g/t
Cu Concentrate
0.9
33.2
0.32
34.4
1.79
36.0
5.03
Cu Ro Scav Tail
2.3
5.88
10.3
33.1
3.65
7.96
1.59
Po 3rd Cl Conc
0.4
5.03
10.5
36.5
5.91
14.4
1.50
Po 1st Cl Tails
13.3
0.20
0.75
22.6
0.23
0.57
0.06
Po Ro Scav Conc
4.0
0.12
0.53
25.1
0.25
0.54
0.06
Po Rougher Tail
79.1
0.05
0.05
0.59
0.08
0.20
0.03
Combined. Ni
Concentrate (Cu
Ro Scav Tails
+
Po 3rd Cl Conc)
2.7
5.74
10.3
33.7
4.02
9.0
1.58
Head (Calc.)
100
0.49
0.44
5.72
0.23
0.83
0.12
Product
% Distribution
Weight
%
Cu
%
Ni
%
S
%
Pt
g/t
Pd
g/t
Au
g/t
Cu Concentrate
0.9
54.6
0.7
5.7
7.3
40.1
38.8
Cu Ro Scav Tail
2.3
27.1
52.2
13.0
36.1
21.6
30.0
Po 3rd Cl Conc
0.4
4.5
10.4
2.8
11.4
7.7
5.5
Po 1st Cl Tails
13.3
5.4
22.3
52.5
13.7
9.1
7.0
Po Ro Scav Conc
4.0
1.0
4.8
17.8
4.5
2.6
2.1
Po Rougher Tail
79.1
7.4
9.7
8.2
27.0
18.9
16.6
Combined Ni
Concentrate (Cu
Ro Scav Tails +
Po 3rd Cl Conc)
2.7
31.6
62.5
15.8
47.5
29.3
35.6
Head (Calc.)
100
100
100
100
100
100
100
The copper and nickel concentrates were found to be clean with little MgO (<1%) nor minor deleterious
elements (i.e., As, Bi, Pb, Se, Te, Cl, F, Hg etc.) close to penalty levels.
The Cu Scavenger Tail assayed
0.64% Co which is well into the payable range for Nickel concentrates.
The Co level in the copper
concentrate was very low at 176 g/t.
The current program was an acceptable demonstration of what the metallurgy could be for the Selkirk
deposit.
It is envisioned that there will be 3 to 4 more phases in metallurgical development.
Qualified Person
The scientific and technical content of this news release has been reviewed and approved by Phillip
Mackey, PhD, P. Eng., Metallurgical Consultant, who is a "qualified person" for the purposes of National
Instrument 43-101 -
Standards of Disclosure for Mineral Projects
.
QA/QC
SGS Minerals Lakefield is accredited to the requirements of ISO/IEC 17025 for specific tests as listed
on their scope of accreditation, including geochemical, mineralogical, and trade mineral tests. To view a
list of the accredited methods, please visit the following website and search SGS Lakefield:
http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
.
About Premium Nickel Resources Ltd.
PNRL is a Canadian company dedicated to the exploration and development of high-quality nickel-
copper + cobalt resources.
PNRL believes that the medium to long-term demand for these metals will
continue to grow through global urbanization and the increasing replacement of internal combustion
engines with electric motors.
Importantly, these metals are key to a low-carbon future.
PNRL maintains a skilled team with strong financial, technical and operational expertise to take an asset
from discovery to exploration to mining.
PNRL has focused its efforts on discovering world class nickel sulphide assets in jurisdictions with rule-
of-law that fit a strict criteria that comply with PNRL's values and principles which stand up and surpass
the highest acceptable industry standards.
PNRL is committed to governance through transparent
accountability and open communication within our team and our stakeholders.
On January 31, 2022, PNRL closed the acquisition of PNRL's flagship asset, the Selebi Mine.
The
Selebi Mine includes two shafts, (Selebi and Selebi North shafts) and related infrastructure (rail, power
and water).
Shaft sinking and plant construction started in 1970.
Mining concluded in October 2016 when
the operations were placed on care and maintenance due to a failure in the separate and offsite
processing facility.
The Selebi Mine was subsequently placed under liquidation in 2017.
The proposed work plan for the Selebi Mine includes diamond drilling which is expected to be ongoing
for up to 18 months.
During that time, additional metallurgical samples will be collected and sent for more
detailed studies.
The underground infrastructure at Selebi North will be upgraded to support an
underground drilling program as well as improve health & safety.
In addition, PNRL is evaluating direct and indirect nickel asset acquisition opportunities globally, and
also: (i) holds 100% interest in the Selkirk Mining Licence and four Prospecting Licenses in Botswana,
(ii) holds a 100% interest in the Maniitsoq property in Greenland, which is a camp-scale permitted
exploration project comprising 3,048 square kilometres covering numerous high-grade nickel-copper +
cobalt-sulphide occurrences associated with norite and other mafic-ultramafic intrusions of the
Greenland Norite Belt; (iii) holds a 100% interest in the Post Creek/Halcyon property in Sudbury, Ontario
which is strategically located adjacent to the past producing Podolsky copper-nickel-precious metal
sulphide deposit of KGHM International Ltd.; (iv) holds a 100% ownership of property in the Quetico
region near Thunder Bay, Ontario; and (v) is expanding its area of exploration interest into Morocco.
ON BEHALF OF THE BOARD OF DIRECTORS
Keith Morrison
Chief Executive Officer
Premium Nickel Resources Ltd.
For further information about Premium Nickel Resources Ltd., please contact:
Jaclyn Ruptash
Vice President Business Development
+1 (604) 770-4334
Cautionary Note Regarding Forward-Looking Information
Certain statements contained in this news release may be considered "forward-looking statements"
within the meaning of applicable Canadian securities laws, including the ability of exploration results
(including drilling) to accurately predict mineralization; the significance of the metallurgical study; the
significance of PGE in the concentrate; and the business and prospects of the Company.
These
forward-looking statements, by their nature, require the Company to make certain assumptions and
necessarily involve known and unknown risks and uncertainties that could cause actual results to
differ materially from those expressed or implied in these forward-looking statements.
Forward-looking
statements are not guarantees of performance.
Words such as "may", "will", "would", "could", "expect",
"believe", "plan", "anticipate", "intend", "estimate", "continue", or the negative or comparable
terminology, as well as terms usually used in the future and the conditional, are intended to identify
forward-looking statements.
Information contained in forward-looking statements are based upon
certain material assumptions that were applied in drawing a conclusion or making a forecast or
projection, including management's perception of geology and mineralization; perceptions of
historical trends, current conditions and expected future developments, current information available
to the management of the Company, public disclosure from operators of the relevant mines, as well
as other considerations that are believed to be appropriate in the circumstances.
The Company
considers its assumptions to be reasonable based on information currently available, but cautions the
reader that their assumptions regarding future events, many of which are beyond the control of the
Company, may ultimately prove to be incorrect since they are subject to risks and uncertainties that
affect the Company and its businesses.
For additional information with respect to these and other factors and assumptions underlying the
forward-looking statements made in this news release concerning the Company, see the section
entitled "Risks and Uncertainties" in the most recent management discussion and analysis of the
Company, which is filed with the Canadian securities commissions and available electronically under
the Company's issuer profile on SEDAR (
www.sedar.com
) and the risk factors outlined in the filing
statement of the Company dated July 22, 2022, which are available electronically on SEDAR
(
www.sedar.com
) under the PNRL's issuer profile.
The forward-looking statements set forth herein
concerning the Company reflect management's expectations as at the date of this news release and
are subject to change after such date.
The Company disclaims any intention or obligation to update or
revise any forward-looking statements, whether as a result of new information, future events or
otherwise, other than as required by law.
Neither the Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the Exchange) accepts responsibility for the adequacy or accuracy of this news
release.
No stock exchange, securities commission or other regulatory authority has approved
or disapproved the information contained herein.
Figure 2. Flowsheet used in PNRL LCT testing- production of Cu/Ni 1
st
Cleaner concentrate
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7759/134700_fig2en.jpg
Figure 3. Flowsheet used in PNRL LCT testing- production of nickel concentrate (Cu Ro Scav
tails) and copper concentrate (Cu 3rd Cl conc)
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7759/134700_fig3en.jpg
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/134700