NexMetals Drills 210 Metres of 1.06% CuEq Highlighting Continuous Mineralization and Expansion at Selkirk
NexMetals Drills 210 Metres of 1.06% CuEq
Highlighting Continuous Mineralization and Expansion at
Selkirk
Vancouver, British Columbia--(Newsfile Corp. - September 23, 2025) -
NexMetals Mining Corp.
(TSXV: NEXM) (NASDAQ: NEXM)
(the "
Company
") announces assay results from two additional
holes from the 12 hole metallurgical drilling program completed at the past-producing Copper, Nickel,
Cobalt and Platinum Group Elements ("
Cu-Ni-Co-PGE
") Selkirk Mine in Botswana.
Why This Matters: Scale, Grade, Growth
SMET-25-004: wide interval of continuous mineralization
210.00 metres of 1.06% CuEq
(0.40% Cu, 0.36% Ni, 0.59 ppm Pd, 0.14 ppm Pt)
incl. 74.00 metres of 1.28% CuEq (0.45% Cu, 0.46% Ni, 0.73 ppm Pd, 0.17 ppm Pt)
Mineralization outside the Mineral Resource Estimate ("MRE") and within the current
conceptual pit shell, demonstrating the potential for expansion of the deposit toward the
surface.
SMET-25-001: starting at 13.00 metres from surface
45.00 metres of 0.69% CuEq
(0.23% Cu, 0.23% Ni, 0.46 ppm Pd, 0.10 ppm Pt)
Large widths of near-surface mineralization support open-pit development potential with a low strip
ratio (see technical report).
Current cut-off of US$25.00 per tonne net smelter return defined in the MRE translates to 0.46%
CuEq. Any material above this cut-off grade could be potentially mined.
These results bring the total number of metallurgical drill holes announced from the 2025 program
to four (
see
news release dated September 18, 2025
), with assays to be released on an
ongoing basis.
Figure 1:
Location of 2025 metallurgical drill holes, resampled drillholes and Mineral Resource
Estimate
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7759/267498_8c856fa884d1aadc_002full.jpg
Morgan Lekstrom, CEO of the Company, commented:
"The results today, combined with last
week's news of drill hole 003, highlight multiple intercepts over 200 metres of high-grade mineralization,
once again exceeding our expectations at Selkirk
.
These results position Selkirk as a standout asset,
reinforcing the substantial scale of the deposit. Exceptionally notable are drill holes 003 and 004, as they
show very similar grades despite being more than 125 metres apart. This further emphasizes both the
size, consistency, and presence of broad intervals of higher grades within this deposit. Upcoming
catalysts include resource expansion, metallurgical results and optimization, rapidly unlocking the full
value and long-term potential of the Selkirk mine."
Assay results are reported below in Table 1 and drill hole collar details are provided in Table 2.
Table 1: Assay Results Selkirk Deposit
HOLE ID
FROM
(m)
TO
(m)
1
LENGTH
(m)
2
Est. True
Thickness
(m)
Cu
(%)
NI
(%)
Co
(%)
Pd
(ppm)
Pt
(ppm)
Au
(ppm)
3
CuEq
(%)
SMET-25-
001
13.00
65.70
52.70
38
0.22
0.23
0.01
0.46
0.10
0.04
0.68
SMET-25-
001
90.25
208.00
117.75
85
0.26
0.24
0.01
0.53
0.11
0.05
0.76
incl.
92.55
156.00
63.45
46
0.26
0.25
0.02
0.51
0.10
0.04
0.76
and
92.55
99.85
7.30
5
0.47
0.57
0.03
0.68
0.13
0.06
1.38
and
138.00
156.00
18.00
13
0.38
0.30
0.02
0.76
0.15
0.06
1.05
SMET-25-
004
66.00
276.00
210.00
160
0.40
0.36
0.02
0.59
0.14
0.06
1.06
incl
66.00
187.00
121.00
92
0.36
0.37
0.02
0.58
0.14
0.06
1.02
incl
113.00
187.00
74.00
56
0.45
0.46
0.03
0.73
0.17
0.08
1.28
incl
131.65
187.00
55.35
42
0.52
0.47
0.03
0.80
0.18
0.09
1.40
OUTSIDE MRE AND INSIDE CONCEPTUAL PIT
SMET-25-
001
13.00
58.00
45.00
32
0.23
0.23
0.01
0.46
0.10
0.04
0.69
OUTSIDE MRE AND BENEATH CONCEPTUAL PIT
SMET-25-
001
186.00
208.00
22.00
16
0.30
0.24
0.01
0.50
0.10
0.04
0.79
SMET-25-
004
285.00
299.00
14.00
11
0.22
0.23
0.02
0.37
0.09
0.04
0.64
HOLE ID
FROM
(m)
TO
(m)
1
LENGTH
(m)
2
Est. True
Thickness
(m)
Cu
(%)
NI
(%)
Co
(%)
Pd
(ppm)
Pt
(ppm)
Au
(ppm)
3
CuEq
(%)
1
Length refers to drillhole length and not true width.
2
True thickness is estimated using the MRE wireframe where available.
3
CuEq% calculated using the formula Cu% + Ni%*(55.605/53.913) + Pd g/t*(22.948/53.913) + Pt g/t*(14.891/53.913) using metal prices and
recoveries listed in the 2025 Technical Report.
3
Interval is outside MRE but inside the conceptualized open pit shell.
Table 2: Drill Collar Information Selkirk Deposit
HOLE ID
1
Easting
1
Northing
1
Elevation
Dip
Azimuth
Hole Length
(m)
SMET-25-001
575502.8
7642676.4
993.9
-89.8
17.5
273.70
SMET-25-004
575406.7
7642671.8
1000.7
-88.1
14.2
375.45
1
Coordinates are WGS84z35S with geoidal elevations
Technical Report
The MRE on the Selkirk Mine is supported by the Technical Report entitled "NI 43-101 Technical Report
Selkirk Nickel Project, North East District, Republic of Botswana", dated January 8, 2025 (with an
effective date of November 1, 2024). Reference should be made to the full text of the Technical Report
for the assumptions, qualifications and limitations set forth therein, which was prepared in accordance
with NI 43-101 and Subpart 1300 of Regulation S-K and is available on SEDAR+ (
www.sedarplus.ca
)
and EDGAR (
www.sec.gov
), in each case, under NEXM's issuer profile.
Quality Control
The Selkirk metallurgical drill program was completed by Discovery Drilling using a Boyles 56 machine.
Drill core samples are HQ (63.5 mm diameter) that were sawn in half with one half sawn in half again to
produce quartered core. Selected portions of the remaining core were sent to Blue Coast Research for
metallurgical flotation studies with the reminder retained for reference purposes. The quartered core
samples submitted to the lab were generally 1 metre in length. Sample preparation and lab analysis was
completed at ALS Chemex in Johannesburg, South Africa. Commercially prepared blank samples and
certified Cu/Ni sulphide analytical control standards with a range of grades are inserted in every batch of
20 samples or a minimum of one set per sample batch. Analyses for Ni, Cu and Co are completed using
a peroxide fusion preparation and ICP-AES finish (ME-ICP81). Analyses for Pt, Pd, and Au are by fire
assay (30 grams nominal sample weight) with an ICP-AES finish (PGM-ICP23).
Qualified Person
All scientific and technical information in this news release has been reviewed and approved by Sharon
Taylor, VP Exploration of the Company, MSc, P.Geo, and a "qualified person" for the purposes of
National Instrument 43-101 and Subpart 1300 of Regulation S-K.
About NexMetals Mining Corp.
NexMetals Mining Corp. is a mineral exploration and development company that is focused on the
redevelopment of the previously producing copper, nickel and cobalt resources mines owned by the
Company in the Republic of Botswana.
NexMetals is committed to governance through transparent accountability and open communication
within our team and our stakeholders. NexMetals' team brings extensive experience across the full
spectrum of mine discovery and development. Collectively, the team has contributed to dozens of
projects, including work on the Company's Selebi and Selkirk mines. Senior team members each have
on average, more than 20 years of experience spanning geology, engineering, operations, and project
development.
For further information about NexMetals Mining Corp., please contact:
Morgan Lekstrom
CEO and Director
Jaclyn Ruptash
V.P., Communications and Investor Relations
1-833-770-4334
Follow Us
X:
https://x.com/NexMetalsCorp
LinkedIn:
https://www.linkedin.com/company/NexMetalsMiningCorp
Facebook:
https://www.facebook.com/NexMetalsMiningCorp
Neither the TSX Venture Exchange and its Regulation Services Provider (as that term is defined
in the policies of the TSX Venture Exchange) nor the Nasdaq Stock Market LLC accepts
responsibility for the adequacy or accuracy of this news release. No stock exchange, securities
commission or other regulatory authority has approved or disapproved the information
contained herein.
Cautionary Note Regarding Forward-Looking Statements
This news release contains forward-looking statements" within the meaning of the United States
federal securities laws and "forward-looking information" within the meaning of applicable Canadian
securities legislation (collectively, "forward-looking information") based on expectations, estimates
and projections as at the date of this news release. Forward-looking information involves risks,
uncertainties and other factors that could cause actual events, results, performance, prospects and
opportunities to differ materially from those expressed or implied by such forward-looking information.
For the purposes of this release, forward looking information includes, but is not limited to, the
implementation of the objectives, goals and future plans of the Company including the proposed
advancement of the Selkirk Mine as currently contemplated; the release of metallurgical testing
results and the expected timing thereof; management's belief that historical resources could be
indicative of the presence of mineralization on the deposits; the potential for near surface expansion
of the deposit; the potential for open-pit development with a low strip ratio; the potential for material
above the cut-off grade to be mined; and the anticipated benefits of the Company's approach to its
resource development plan. These forward-looking statements, by their nature, require the Company
to make certain assumptions and necessarily involve known and unknown risks and uncertainties that
could cause actual results to differ materially from those expressed or implied in these forward-looking
statements. Factors that could cause actual results to differ materially from such forward-looking
information include, but are not limited to, capital and operating costs varying significantly from
estimates; the preliminary nature of drilling and metallurgical test results; the ability of exploration
results to predict mineralization; the ability of the Company to implement its drilling, geoscience and
metallurgical work on its properties and work plans generally; prefeasibility or the feasibility of mine
production; delays in obtaining or failures to obtain required governmental, environmental or other
project approvals; uncertainties relating to the availability and costs of financing needed in the future;
changes in equity markets; inflation; fluctuations in commodity prices; delays in the development of
projects; the other risks involved in the mineral exploration and development industry; and those risks
set out in the Company's filings with the U.S. Securities and Exchange Commission on EDGAR
(
www.sec.gov
) and public disclosure record on SEDAR+ (
www.sedarplus.ca
), in each case, under
NEXM's issuer profile. Although the Company believes that the assumptions and factors used in
preparing the forward-looking information in this news release are reasonable, undue reliance should
not be placed on such information, which only applies as of the date of this news release, and no
assurance can be given that such events will occur in the disclosed time frames or at all. The
Company disclaims any intention or obligation to update or revise any forward-looking information,
whether as a result of new information, future events or otherwise, other than as required by law.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/267498