Northisle Announces Drill Results at Northwest Expo Including 132.8m Grading 1.49g/t Au Eq.
Northisle Copper and Gold Inc. | 1200 – 1166 Alberni St. | Vancouver, BC | V6E 3Z3
www.northisle.ca | [email protected]
November 5, 2024
TSX Venture Exchange Symbol: NCX
Northisle Announces Drill Results at Northwest Expo
Including 132.8m Grading 1.49g/t Au Eq.
Highlights:
• NW24-27 included a 120m interval grading 0.57g/t Au Eq. and an additional 48m grading 0.35g/t Au Eq., and
was successful in testing the eastern extent and potential feeder zone of the Northwest Expo deposit
• NW24-28 included 81m grading 1.26g/t Au Eq. and is above the resource block grade from the recent 2024
resource estimate in this up-dip, near-surface portion of the model
• NW24-29 intercepted 132.8m grading 1.49g/t Au Eq., including 33m grading 2.66g/t Au Eq., and similarly is
above the resource block grade in this portion of the resource estimate
• Many of the assays contained elevated molybdenum and rhenium values which suggest that recovery of these
metals should be investigated in future studies
• All holes drilled contributed meaningful structural knowledge and have provided further support for potential
primary hypogene porphyry mineralization at depth
Vancouver, B.C. – Northisle Copper and Gold Inc. (TSX-V: NCX) (“Northisle” or the “Company”) is pleased to announce
that assays from the first five drill holes of the Company’s 2024 drill program at Northwest Expo have now been
released.
NW24-27, NW24-28 and NW24-29 all included lengthy intercepts of mineralization, and demonstrated the potential for
future improvements to the resource estimate of this deposit with grades reporting above the block grades in the
recently issued resource estimate for the North Island Project. In addition, 2024 drilling at Northwest Expo has
successfully achieved the Company’s secondary objectives of providing additional vectoring information, with several
holes indicating increasing vein density at depth as a possible vector to a potential source porphyry intrusion. NW24-30
and NW24-31 stepped out from known mineralization and provided important structural understanding which is
described further below but did not intercept economically significant mineralization.
Significant grade intervals from 2024 drilling at Northwest Expo are shown in Table 1.
Table 1: Northwest Expo Significant Intercepts
Hole ID From
(m)
To (m) Interval
(m)
Au Grade
(g/t)
Cu Grade
(%)
Mo Grade
(ppm)
Re Grade
(g/t)
Au Eq.
Grade (g/t)
Cu Eq.
Grade (%)
NW24-27 225 345 120 0.43 0.10 166 0.51 0.57 0.42
including 285 345 60 0.50 0.18 121 0.46 0.74 0.55
and 360 408 48 0.28 0.05 42 0.01 0.35 0.26
NW24-28 180 261 81 0.99 0.22 - - 1.26 1.05
NW24-29 270 402.8 132.8 1.19 0.27 50 0.60 1.49 1.31
including 290 402.8 112.8 1.30 0.30 50 0.47 1.65 1.45
& includes 356 389 33 2.10 0.50 46 1.01 2.66 2.36
Note: In table “-“ indicates background level assays. Intervals are approximately true widths as the drill holes were targeted perpendicular to the ore body as shown in
Figures 2 and 3. Intervals were selected based on continuous intercepts with a copper grade above 0.1% Cu or a gold grade above 0.1g/t Au combined with geological
interpretation. Totals may not add due to rounding. NW24-30 and NW24-31 did not intercept economically significant mineralization.
Note on equivalent calculation:
Equivalent grades are calculated as follows, which reflect the differences in recoveries, payables and metal prices between the deposits, as further detailed in the
Company’s recent resource estimate for the North Island Project as disclosed on October 10, 2024.
• Metal prices of Cu = US$4.00/lb, Au = US$1,910/oz, as well as Mo = US$21/lb and Re = US$1,777/kg
• Cu Eq.: Chlorite-magnetite (CMG) alteration: Cu Eq. = Cu + Au*0.888; Non-CMG: Cu Eq. = Cu + Au*0.737
• Au Eq.: CMG: Au Eq. = Au + 1.126*Cu%; Non-CMG: Au Eq. = Au + 1.358*Cu%
Northisle Copper and Gold Inc. | 1200 – 1166 Alberni St. | Vancouver, BC | V6E 3Z3
www.northisle.ca | [email protected]
Robin Tolbert, Vice President Exploration stated, “We are encouraged by the initial 2024 results from Northwest Expo,
which have improved on the block model grade in this area of the resource estimate and have provided additional
vectoring information towards a potential porphyry source.” Assays from the remainder of the 2024 Northwest Expo
drill program are anticipated by the end of 2024.
Northwest Expo Drill Result Details
Assay results have now been received for five of the eleven drill holes completed during 2024 on the Northwest Expo
deposit and surrounding area. Results presented today include holes NW24-27 through NW27-31. NW24-27 to NW24-30
were drilled with dual objectives in mind: upgrading the inferred resource and exploring for potential vectors at depth to
aid near field targeting for hypogene porphyry mineralization in 2025. All holes reported were oriented, and NW24-27 to
NW24-30 were drilled from existing or reactivated forest service roads and drill pads from 2023. NW24-31 was drilled
from a helicopter pad approximately 2km southeast of the resource footprint.
Assay results from NW24-27 confirm the eastern extents of the resource at Northwest Expo. Grades pinch out to the
southeast, in support of recent surface structural interpretation. Late structural off-set appears to have dislocated the
mineralized body at Northwest Expo, creating the potential to identify fault-offset mineralization in multiple directions.
Both NW24-28 and NW24-29 were successful in intersecting encouraging vein texture and alteration suggesting the
potential for underlying classic porphyry-style mineralization. Increased proportions of porphyry-related veins in the
breccia which hosts the highest grades in Northwest Expo, as well as encouraging high temperature clay alteration below
the mineralized breccia help place the Northwest Expo deposit in the upper levels of a potentially telescoped porphyry-
lithocap system.
NW24-30 was drilled to test for a potential fault offset to the south of known mineralization at Northwest Expo. The hole
did not intercept economically significant mineralization but confirmed the presence and informed the dip direction of
the fault zone which has contributed to an improved understanding of the structure of this area and will aid in future
vectoring to the potential location of the hypothesized causative intrusion in this area.
NW24-31 was drilled to test a magnetic anomaly approximately 2km to the southeast of known mineralization at
Northwest Expo and intersected intense quartz-sericite-pyrite (“QSP”) alteration which is interpreted to indicate
proximity to another porphyry source in this area, but did not intercept economically significant mineralization. The drill
pad for this hole has been left in place to support future drilling in this area.
Assays from the remainder of the Northwest Expo drill program are anticipated by the end of 2024. Additional details
from the reported drill holes can be found below.
Table 2 shows the collar data for the holes drilled and reported from Northwest Expo in 2024.
Table 2: Northwest Expo 2024 Drill Hole Collar Locations for Released Holes
Hole ID Length
(m)
UTM
East
UTM
North
UTM
Elevation
Azimuth Dip
NW24-27 528 569580 5619448 405 180 -50
NW24-28 321 569267 5619491 425 190 -45
NW24-29 456 569229 5619599 453 190 -70
NW24-30 360 569484 5618987 211 350 -55
NW24-31 489 570991 5618197 181 50 -60
Relogging of core, localized surface mapping, and a recent high definition heliborne magnetic gradient survey resulted in
positive refinement of the exploration model at Northwest Expo. In late 2023 and early 2024 Northisle geologists
observed several generations of porphyry related quartz vein arrays and weak quartz stockworks in the deepest portions
Northisle Copper and Gold Inc. | 1200 – 1166 Alberni St. | Vancouver, BC | V6E 3Z3
www.northisle.ca | [email protected]
of the Northwest Expo system which supplied vectors towards mineralization at depth. The first four holes at Northwest
Expo in 2024 sought to follow up on these vectors and potentially upgrade the inferred resource. NW24-27, NW24-28
and NW24-29 were successful in intersecting increased porphyry related veining related to high grade samples
associated with encouraging QSP alteration. Interpretation of the 2024 gradient magnetic survey suggests the potential
for several late off-setting faults which has contributed to improved structural understanding in this area. The late off-
setting faults suggest the western and eastern extents of the deposit remain open to the southwest and northeast,
respectively, dependent on further interpretation of the throw of said fault. Mapping and core analysis focusing on
structure is currently in the planning stages and is anticipated to be executed before drilling in 2025.
Figure 1 shows the Northwest Expo deposit in plan view, with sections and current results highlighted. Figures 2 and 3
show cross-sectional views of NW24-27 through NW24-29 with the 2024 resource estimate pit shell and mineralized
shell included. Systematic variation in texture from NW24-28 to NW24-29 on the same section supports the theory that
mineralization within the current Northwest Expo resource is related to a potentially fertile porphyry system at depth.
Discontinuous mineralization in NW24-27 supports the potential for late brittle-ductile offset which leaves the system
open in both east and west directions, while maintaining prospectivity at depth.
Figure 1: Plan View of Northwest Expo with Reported Holes Highlighted
NW24-28 and NW24-29 were drilled in the west-central portions of the resource. NW24-28 and NW24-29 intersected
significant grades, with NW24-29 being higher grade than anticipated, within significant lengths of magmatic
hydrothermal breccia with intense CMG alteration. The upper levels of this breccia hosted xenoliths of chalcopyrite-
magnetite stockwork veined feldspar porphyry. Grades increase up-dip towards surface, as confirmed in NW24-28.
NW24-27 intersected mineralization and alteration consistent with interpretation that the eastern margin of the deposit
is off-set by late faulting. The hole was extended to 528m after intersecting a low-grade mineralized intrusive with
porphyry related banded parallel vein sets and multiple orientations of D-vein arrays, bolstering the Northwest Expo
exploration model and vectoring efforts. The low copper grades in the lower intercept in this hole are interpreted as late
Northisle Copper and Gold Inc. | 1200 – 1166 Alberni St. | Vancouver, BC | V6E 3Z3
www.northisle.ca | [email protected]
acid overprint remobilizing Cu to the overlying magmatic-hydrothermal breccia, while the gold remains in the early
quartz-magnetite veins.
Figure 2: Cross-section 569575 East with NW24-27 Highlighted
Figure 3: Cross-section 569225 East Showing NW24-28 and NW24-29
Northisle Copper and Gold Inc. | 1200 – 1166 Alberni St. | Vancouver, BC | V6E 3Z3
www.northisle.ca | [email protected]
Upcoming Catalysts
In 2024, the Company will continue advancing the North Island Project, with development and exploration catalysts
throughout the year leading to measurable impacts for shareholders, including the following:
• COMPLETED - Geophysics results from Northwest Expo and West Goodspeed
• COMPLETED - Northwest Expo metallurgical testing and initial resource estimate
• COMPLETED - Final 2023 Pemberton Hills Drill Results
• COMPLETED - Commencement of 2024 drilling program
• COMPLETED - Preliminary Project Trade-offs
• COMPLETED - Commencement of advanced economic and technical studies
• COMPLETED - Drill results from West Goodspeed
• COMPLETED – Integrated North Island Project Mineral Resource Estimate
• Q4 2024 - Additional Exploration Results from Northwest Expo
• Q4 2024 - Additional Exploration Results from West Goodspeed
• Q4 2024 - North Island Project Resource Estimate Technical Report
• Q4 2024 / Q1 2025 - North Island Project Updated PEA
• Ongoing - Continued respectful engagement with indigenous rightsholders and local stakeholders
Upcoming Investor Events
The Company will continue to be active in investor outreach. Northisle will be attending several external investor events
including the following events during Q4 2024 / Q1 2025:
• November 20 – 21: Swiss Mining Institute, Zurich, Switzerland
• January 14 – 16, 2025: TD Annual Global Mining Conference, Toronto, ON, Canada
• January 19 – 20, 2025: Vancouver Resource Investment Conference, Vancouver, BC, Canada
• January 20 – 23, 2025: AME Roundup, Vancouver, BC, Canada
• February 3, 2025: Canadian Critical Minerals Opportunities Forum, New York, United States
• March 2 – 5, 2025: Prospectors & Developers Association of Canada (PDAC), Toronto, ON, Canada
Additional Technical Details
Logging, Sampling and Assaying Procedures and QA/QC
The diamond drill core logging and sampling program was carried out under a rigorous quality assurance / quality control
(QA/QC) program. Drill intersections in this release are typically HQ to 100 m and NQ thereafter to the end of holes. After
drilling, core was logged for geology, structure, and geotechnical characteristics utilizing Geospark© core logging software,
then marked for sampling and photographed on site. The cores for analyses were marked for sampling based on geological
intervals with individual samples 3 m or less in length. Drill core was cut lengthwise in half with a core saw. Half-core was
sent for assays reported in this news release. Prior to cutting core for assay bulk density was also determined on site by
taking 15 to 20 centimetres (cm) lengths of whole core of each lithology at 10 m intervals. The ends of these were then
cut at right angle to the core axis, retaining all pieces to be returned to the core box for later sample cutting and analysis.
The diameter of each core sampled for bulk density was measured at each end with digital calipers to 3 decimal places
and recorded. The length of the core w as measured on four sides at 90 degrees to each other, to 2 decimal places and
recorded. The software averaged the lengths and diameters. The mass of the dry core was measured twice on an Ohaus©
balance to 2 decimal places. If no discrepancy occurred the measurement was recorded. If there was a discrepancy the
measuring was repeated until no discrepancy between 2 measurements occurred. The density was calculated using the
formula Bulk Density = π times r² times h (where r is radius of core and h is length of core). Certified standard masses are
used to calibrate the scale balance used for bulk density determinations. The balance in the core logging area was levelled
Northisle Copper and Gold Inc. | 1200 – 1166 Alberni St. | Vancouver, BC | V6E 3Z3
www.northisle.ca | [email protected]
on a large concrete block to avoid vibration, was leveled, and surrounded by a wooden partition to avoid wind affecting
the balance. The measurements were recorded in Geospark© logging software and Bulk Density calculated to 2 decimal
places.
A total of 5% assay standards or blanks and 5% core duplicates are included in the sample stream as a quality control
measure and are reviewed after analyses are received. Standards were obtained from WCM Minerals, Vancouver , CDN
Minerals, Langley and OREAS, Canada. Blanks were obtained from unmineralized course bagged limestone landscaping
rock. Standards and blanks in 2024 drill results to date have been approved as acceptable. Duplicate data add to the long-
term estimates of precision for assay data on the project and precision for drill results reported is deemed to be within
acceptable levels. Samples were sent to the MSALABS in Langley, BC where the samples were dried, then crushed, split
and a 250 gram (g) split was pulverized to 85% passing -200 mesh (-75 micrometres (µm)) size pulps. Clean crush material
was passed through the crusher and clean silica was pulverized between each sample. The pulps were analyzed for gold
by fire assay fusion of 50 g of the 250 g split. Total gold content was determine d by digesting the silver doré bead from
the fusion and then analysing by AA (MSA Code FAS-121). All samples were also analyzed for multiple elements by taking
a 0.25 g of the 250g split which was heated in HNO3, HClO4 and HF to fuming and taken to dryness. The residue was
dissolved in HCl and then analyzed utilizing ICP-MS (MSA Code IMS-230). Any sulphur analysis from this latter analysis with
a value greater than 10% was reanalyzed utilizing a Leco sulfur analyzer. Iron and Tungsten accelerators are added to the
sample and a stream of oxygen is passed over the sample in the induction furnace. As the sample is heated, sulfur dioxide
released from the sample is measured by an IR detection system and the Total Sulphur content is determined. (MSA Code
SPM-210). MSALABS (Langley) is an independent, international ISO/IEC 17025:2005 accredited laboratory.
Pulps and rejects of holes with significant assay intervals are stored at Western Mineral Storage. The remaining split core
is indexed and stored at Northisle logging and office facility in Port Hardy, BC.
Drill Results in this news release are length weighted averages.
Qualified Persons and Data Verification
Robin Tolbert, P.Geo., Vice President Exploration of Northisle , and a Qualified Person as defined by National Instrument
43-101 Standards of Disclosure for Mineral Projects , has reviewed and approved the scientific and technical disclosure
contained in this news release and has verified the data disclosed, including the sampling, analytical and test data
underlying the disclosure.
About Northisle
Northisle Copper and Gold Inc. is a Vancouver-based company whose mission is to become Canada’s leading sustainable
mineral resource company for the future. Northisle, through its 100% owned subsidiary North Island Mining Corp., owns
the North Island Project, which is one of the most promising copper and gold porphyry projects in Canada. The North
Island Project is located near Port Hardy, British Columbia on a more than 34,000-hectare block of mineral titles 100%
owned by Northisle stretching 50 kilometres northwest from the now closed Island Copper Mine operated by BHP
Billiton. Northisle completed an updated preliminary economic assessment for the North Island Project in 2021 and is
now focused on continued advancement of the project while exploring within this highly prospective land package.
For more information on Northisle please visit the Company’s website at www.northisle.ca.
Northisle Copper and Gold Inc. | 1200 – 1166 Alberni St. | Vancouver, BC | V6E 3Z3
www.northisle.ca | [email protected]
On behalf of Northisle Copper and Gold Inc.
Nicholas Van Dyk, CFA
Chief Financial Officer
Tel: (778) 655-9582
Email: [email protected]
www.northisle.ca
Cautionary Note Regarding Adjacent and Historical Property Disclosure
This news release contains information regarding adjacent and historical properties and deposits. Investors are cautioned
that adjacent mineral deposits or systems, or past performance of historical mines, do not necessarily indicate and
certainly do not prove the existence, nature or extent of mineral deposits on the North Island Project.
Cautionary Statements regarding Forward-Looking Information
Certain information in this news release constitutes forward -looking statements under applicable securities law. Any
statements that are contained in this news release that are not statements of historical fact may be deemed to be forward-
looking statement s. Forward -looking statements are often identified by terms such as “may”, “should”, “anticipate”,
“expect”, “intend” and similar expressions. Forward -looking statements in this news release include, but are not limited
to, statements relating to plans and expectations regarding the 2024 or 2025 exploration program; plans and expectations
regarding future project development; timing of key catalysts ; planned activities, including further drilling, at the North
Island Project; the Company’s anticipated exploration activities; and the Company’s plans for advancement of the North
Island Project. Forward -looking statements necessarily involve known and u nknown risks, including, without limitation,
Northisle’s ability to implement its business strategies; risks a ssociated with mineral exploration and production; risks
associated with general economic conditions; adverse industry events; stakeholder engagement; marketing and
transportation costs; loss of markets; volatility of commodity prices; inability to access sufficient capital from internal and
external sources, and/or inability to access sufficient capital on favourable terms; industry and government regulation;
changes in legislation, income tax and regulatory matters; competition; currency and interest rate fluctuations; and other
risks. Readers are cautioned that the foregoing list is not exhaustive.
Readers are further cautioned not to place undue reliance on forward -looking statements as there can be no assurance
that the plans, intentions, or expectations upon which they are placed will occur. Such information, although considered
reasonable by management at the time of preparation, may prove to be incorrect and actual results may differ materially
from those anticipated. Forward -looking statements contained in this news release are expressly qualified by this
cautionary statement.
The forward-looking statements contained in this news release represent the expectations of management of Northisle
as of the date of this news release, and, accordingly, are subject to change after such date. Northisle does not undertake
any obligation to update or revise any forward-looking statements, whether as a result of new information, future events
or otherwise, except as expressly required by applicable securities law.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.