Monday, October 12, 2026
MiningNewsTerminal
Monday, October 12, 2026 Admin

MYR.CN ·

Meryllion Resources Announces Promising Rare Earth Assay Drill Results in Tasmania

Drill Results Exploration Programs

TORONTO, ON, June 23, 2026 - Meryllion Resources Corporation (CSE:MYR) (“Meryllion” or the “Company”) is pleased to announce promising assay results from its initial shallow scout drilling program (Figure 1) at its northeastern Tasmanian ionic adsorption clay (“IAC”) hosted rare earths (“REE”) project.

Russell’s Plains (Launceston) scout drilling has delivered encouraging results and confirms that the rare earth system the company is targeting exists within the project area. Russell’s Plain drill target sits along strike of the Portrush IAC hosted REE project of the Abx Group (Figure 2) (ASX:ABX).

Drilling highlights include -

  • Drill interval with maximum grade up to 879 ppm TREO. This is around the typical head grade of Australian ionic REE clay deposits
  • Five of the twelve holes contain Rare Earth assays above the cut-off grade (> 350 ppm TREO-CeO2 ppm) for resources from the nearby Deep Leads ionic clay REE Deposit (ASX: ABX)
  • In majority of cases, the shallow nature of this drilling program (often <5m depth) only pierced the top of the potential mineralised system, with the bottom of hole ending in mineralisation
  • Scandium mineralisation also identified in several drill holes, with grades up to 164 ppm Sc2O3
  • Scandium is a high value (US$1200-$3800 per Kg for scandium oxide) critical element used in aluminium alloy technologies and solid oxide fuel cells (SOFCs).

Figure 1: Trailer-mounted drilling rig in use at Russell’s Plains.

Meryllion CEO, Richard Revelins, commented: “We are highly encouraged that we were able to demonstrate that our geological theories have been supported by the identification of a potentially large, mineralised target. Being the first drilling program to be undertaken and completed on our leases, we were encouraged leading up to the program by the previous results reported by our immediate neighbours, ABx Group (ASX: ABX). ABX have already established a JORC compliant resource of 89mt @ 844 ppm TREO (refer ABX announcement dated 5 May 2025). Recent column leach results reported 76% extraction of dysprosium (Dy) and 79% extraction of terbium Tb). Dy and Tb are two of the most valuable rare earth elements and are not typically found to any significant degree in hard rock hosted REE projects. ABX has also demonstrated that the mineralisation is suited to low-cost heap leach processing (refer ABX announcement 18 December 2025).

It was also encouraging that scandium mineralisation has been observed in drilling for the first time in the area and will be further targeted in the coming drill programs. Scandium is a high value critical mineral primarily used in the aluminium alloy industry. Australia is developing a scandium industry, with the standout example of Robert Friedland backed Sunshine Energy Metals (ASX:SRL) having a market cap of > Aus $2.5 billion from its development of the Syerston Project in NSW.”

Drilling Results

The drill hole collar details and a full list of assay results are presented in Tables 2 and 3. The strongest REE results came from holes RRP09, RRP13, and RRP14, which returned the highest rare earth values and demonstrate that the mineralised system is active across the prospect area at Russel’s Plain (see Figures 2 to 5). Five of the twelve drillholes demonstrated grades above 350ppm TREO-CeO2, which would fall within the cutoff of all the IAC Rare Earth JORC resources elsewhere in Australia (Table 1). Given the shallowness of the depths the drilling finished, potentially only the top of the mineralised system is being intersected.

This included –

  • 1.3m @ 840 ppm TREO from 3m, with end of hole in mineralisation (Drillhole RRP014)
  • 4m @ 625 ppm TREO from 2m and 0.3m @ 835 ppm TREO from 9m with end of hole in mineralisation (Drillhole RRP013)
  • 0.5m @ 862 ppm TREO from 3m, with end of hole in mineralisation (Drillhole RRP009)

These head grades are consistent with other known “ionic REE clay deposits in Australia.

Table 1: Comparison of Australian ionic adsorption clay-hosted rare earth projects, showing JORC Total Resource tonnages, grade and resource grade cut offs.

DepositCompanyHead Grade (TREO)Tonnage MtCut off
Deep Leeds (Tas)1Abx (ASX:ABX)811 ppm89350 ppm (TREO-CeO ) 2
Koppamurra (SA)2Australian Rare Earths (ASX:AR3)748 ppm236324 ppm (TREO-CeO ) 2
Narraburra (NSW)3Godolphin Resources (ASX:GRL)738 ppm95300 ppm (TREO-CeO ) 2
Kennedy (QLD)4DevEx Resources (ASX:DEV)1000 ppm150325 ppm (TREO-CeO ) 2

Scandium

Scandium mineralisation has also been identified from this scout drilling, with maximum grade of 164 ppm Sc2O3. The best three drill holes showed intersections of –

  • 5m @ 133 ppm Sc2O3 from surface, with end of hole in mineralisation (Drillhole RRP002)
  • 2m @ 100 ppm Sc2O3 from surface (Drillhole RRP015)
  • 4m @ 96 ppm Sc2O3 from 1m, with end of hole in mineralisation (Drillhole RRP016)

These grade as similar to other clay-hosted Scandium + REE projects currently being evaluated in Australia. (e.g. Rocky Gully Project – ASX:NYM; Salazar Project, ASX:WC1).

Scandium is considered a Rare Earth and is mainly used in high technology aluminium alloys in the aviation, military, aerospace, semiconductor and energy technology sectors. The USGS quote a price range between $1200 to $3,800 per kg for scandium oxide in recent years5. China recently put export controls on the commodity, coinciding with recent tariff retaliation to the US.

Next Phase of Work

Meryllion will be following up the initial reconnaissance program with additional drilling, targeting what has been identified as likely to host higher-grade mineralisation at Russel’s Plain, as well as the untested Brushy Lagoon and Ready March target areas, which adjoin the Deep Lead and Windbreak Resources of the ABx Group. Work is underway to source a new drill rig for deeper ground penetration, for the next program.

Figure 2: Plan of tenement area showing the Russel’s Plain drilling area, future targets at Brushy Lagoon and Reedy Marsh, and the project areas of ABx Group (e.g. Deep Leads, Rubble Mound, Windbreak and Portrush Prospects).

Figure 3: Geological map of Russell’s Plain drilling area, with section locations (see Figures 4 and 5).

Figure 4: Cross-section AA’ showing TREO results (ppm)

Figure 5: Cross-section BB’ showing TREO results (ppm).

Table 2: List of drill-hole locations*

MGA94 Zone 55
Hole ID _East Z55 _North Z55 _RL AHD _DepthAzimuthDipMethodComment
RRP01512773541922613650-90RABwater at 5m
RRP02513346541868815950-90RABwater at 5m
RRP03514113541812718920-90RABbedrock at 2m
RRP0451446554176911791.20-90RABwater at 1.2m
RRP05514881541740716610-90augerheavy clay
RRP06515061541772114910-90augerheavy clay
RRP0751500954183861530.20-90augerrefusal at 0.2m
RRP0851375354189241324.20-90RABwater at 4.2m
RRP0951362154188581383.50-90RABbit blocked at 3.5m
RRP1051340054186801582.70-90RABfresh dolerite from 1.7m
RRP1151432554183201584.20-90RABwater at 4.2m
RRP1251558654169141583.60-90RABblade refusal at 3.6m in saprock
RRP1351477954172821589.30-90RABblocked at 9.3m
RRP1451347354187701584.30-90RABblade refusal at 4.3m in saprock
RRP155136515418429158100-90RABblocked at 10m
RRP1651340054185861584.70-90RABwater at 4.7m
RPCH0151334054186591581.250-90corepoor recovery

*Hole location co-ordinate system GDA2020 MGA zone 56, and measured with portable GPS (+/- 5m)

Table 3: Table of assay results from drilling at Russell’s Plain.

Permanent Magnets REE
HoleID _from (m)to (m)TREO ppmTREO - CeO2 ppmPerm Mags ppmDy+Tb TREO %Nd2O3 ppmPr6O11 ppmTb4O7 ppmDy2O3 ppmCeO2 ppmEr2O3 ppmEu2O3 ppmGd2O3 ppmHo2O3 ppmLa2O3 ppmLu2O3 ppmSc2O3 ppmSm2O3 ppmTm2O3 ppmY2O3 ppmYb2O3 ppm
RRP010113690313.9215154621412105640232
RRP01125842124.28202162020805720131
RRP01238762213.9143032621311208440162
RRP013413195334.4225153631511707651263
RRP0145172124444.7297174942612218471315
RRP02015942124.48202171020905220131
RRP02124835113.672021310208010310101
RRP02236146144.2920215102010016420141
RRP02347961194.71330318213112013220182
RRP024510682275.51741523314115010430253
RRP0301157118393.8276153942612305160333
RRP0312245200745.35012211456311233187101526
RRP0401277162543.43591811542713713071444
RRP0501149109344.2226164131512116151343
RRP0601318229744.44812212897311245157111696
RRP0801154107354.2236164731512304350313
RRP0812350197663.84310212154621023715691566
RRP08234433601104.97217319831141747826017210511
RRP0834273210624.6401021163621024216091686
RRP090111885294.3195143321411704540232
RRP0912249164583.63910188542813617791404
RRP09235382651022.770172122737313254175161597
RRP0933.58625432003.71353342831915729511626632212114
RRP100110172224.2144042921311702930202
RRP1011.7166123424.0297164331612614660323
RRP101.72.712188274.7184153231511506840283
RRP1100.9172123394.5256174941612415160373
RRP110.91.9192146424.5276184642722717261514
RRP111.93184139404.7266184542622317571514
RRP1134159117344.6225164242511917351414
RRP1201422281934.062152151418313358162151788
RRP1212323268794.95112214558313349176101928
RRP1222.6306266485.12672144011110332249711429
RRP122.63.6189138434.4287175142712516571444
RRP1301275211644.742921164721023815091716
RRP13124743691164.378183171051141947126517211111
RRP13235123821223.58420315130104183911671711069
RRP13347375171443.993224252201552658635523219214
RRP13457625821764.31162752818017632611426926218416
RRP13565975181474.99423425791652759426822218314
RRP1367383341754.347112144292163651711011527
RRP1378152116333.8225153631512317151403
RRP1389162124334.1215163841512117251494
RRP1399.38256711354.381195311542452887843018334820
RRP140111887283.8194143121411905740252
RRP1412225170524.3349185652823515791506
RRP14234213061004.16616315115104153582481518710
RRP14348315391943.91303152829215628510725533313016
RRP1444.38795842104.11413353129518733611136734314218
RRP150111992226.21231626414110110531414
RRP1512179147305.9154193271721819551687
RRP1523139119236.812218207162714931607
RRP153410796168.07118116042412621546
RRP15458576137.7611694042412121415
RRP15567465117.3411593031412211364
RRP15676862107.7411574031311921354
RRP1578615196.15103103021401910263
RRP15897763135.272141430311111720273
RRP159108669155.68214163031811821324
RRP1601177127383.8257165041612816560384
RRP1612431321994.36516216110103163642981529810
RRP16234703511024.267153171191131646629616211811
RRP16344473311004.365163161171041746329412110810
RRP1644.7379284844.25513214959314354194131958

About the Tasmanian Rare Earths Project

The Project is hosted in highly sought rare earth-rich ionic adsorption clay hosted deposits comprising Jurassic Dolerites and Basalts and provides significant upside potential for economic rare earth magnet metals. Globally, most rare earths are sourced from hard-rock mines. These typically require large, costly processing plants and a significant lead time to reach production. A less common source of rare earths is ionic adsorption clay (IAC) deposits. Historically, these have only been mined in southern China. A major advantage of IAC deposits is that the rare earths can be extracted from the clay via a simple leaching process. Secondly, they often exist at shallow depth. These advantages enable a project to be developed rapidly and at lower cost. Furthermore, IAC deposits are relatively richer in the rare earths needed for permanent magnets, and they typically contain low concentrations of radioactive elements such as uranium and thorium.

Qualified Person & National Instrument 43-101 Disclosure

Dr. Gavin Engand (BSc, PhD), member of Australian Institute and Geosciences is a consultant to Meryllion and Technical Advisor. Dr. England is a “qualified person” for the purposes of National Instrument 43-101 – Standards of Disclosure for Mineral Projects, and he has reviewed and approved the scientific and technical disclosure contained in this press release.

Information on historical and recent prospecting, mining, and exploration activities at the Tasmanian REE group of properties, including the Russell’s Plains property, contained within this news release has been reviewed and verified by the Qualified Person. In the opinion of the Qualified Person, sufficient verification of historical and new data has been undertaken to provide sufficient confidence that this new drilling program was performed to adequate industry standards and the data reported is fit for substantiating the prospectivity of the project in general, supporting the geological model/s proposed, planning exploration programs, and identifying targets for further investigation.

This news release contains information about adjacent properties or other projects within Australia, on which the Company does not have an interest. The QP has been unable to verify the information on these adjacent properties, and the information is not necessarily indicative to the mineralization on the properties that is the subject of this news release.

Quality Assurance / Quality Control on Assay Results

The Russell’s Plain drilling collected drill chip samples of soil and clay. Drilling was open-hole RAB using combination of blade bit and DTH hammer; 90mm diameter vertical hole. Sample collection via diverter and cyclone; sample riffle split (15%) for lab sample; remainder used to backfill hole. A visual assessment of recovery was noted on the full geological drill logs. No bias was observed from sample quality and grade. Logging was qualitative and photographs of chip trays holding the 1m samples were taken. Geological logging was done by a qualified geologist.

Each sample represented ~1m (or less) interval and had ~0.75kg dispatched to the laboratory. Assay method was Lithium Borate Fusion, ICP-MS. Analysis was performed on a 250g crushed and pulverised sub-sample, split from the 0.75 kg homogenised sample. 85% passed 75 microns. Analyses were performed at ALS Burnie Tasmania, Australia and were delivered from site to the lab by the consultant geologist. No field blanks, standards or duplicates were applied, given it being early-stage exploration; internal laboratory QA/QC only (lab QA/QC within range).

Hand-held GPS (+-5m) and public domain DEM for elevation (+-2m) were applied and the coordinates were in GDA94 MGA Zone 55.

Mineralised Interval Calculations

Reported rare earth element significant mineralised intervals in this news release are calculated as down-hole lengthweighted intercepts using ~350 ppm TREO-CEO lower cut-off grade and generally carry a maximum internal dilution of 1m. No top-cut grade was applied. For scandium intersection, a down-hole length-weighted intercept using ~90 ppm Sc2O3 lower cut-off grade. True widths of drill hole intercepts are yet to be determined; however, it is estimated that true widths are in the range of 70% to 95% of reported intervals.

Rare Earth Element Calculations

TREO (Total Rare Earth Oxides) values were calculated by the formula: TREO = CeO2 + La2O3 + Nd2O3 + Pr6O11 + Sm2O3 + Gd2O3 + Dy2O3 + Eu2O3 + Er2O3 + Tb4O7 + Ho2O3 + Tm2O3 + Lu2O3 + Yb2O3 + Y2O3.

MREO (Magnet Rare Earth Oxides) values were calculated by the formula: TREO = Nd2O3 + Pr6O11 + Sm2O3 + Gd2O3 + Dy2O3 + Tb4O7 + Ho2O3.

Standard element to oxide conversion factors have been used in the calculation of rare earth oxide values from elemental assay values.

References

1 Abx Group ASX announcement 2 May 2024 2 Australian Rare Earths ASX announcement 30 September 2024 3 Godolphin Resources Ltd ASX announcement 19 April 2023 4 DevEx Resources Ltd ASX announcement 4 July 2024 5 USGS Scandium Fact Sheet 2024. https://pubs.usgs.gov/periodicals/mcs2025/mcs2025-scandium.pdf

About Meryllion Resources Corporation

Meryllion is an exploration stage company listed on the Canadian Securities Exchange. The Company has entered into a lease and option agreement in respect of the Makenzie antimony/gold/silver project located 48kms north northwest of Kinross Mining’s Round Mountain Gold Project (+20m ozs Au), Nevada in the Toiyabe Range of central Nevada. Makenzie is one of the largest known untested antimony, gold and silver anomalies in the state of Nevada.

Meryllion also has the rights to acquire up to a 100% interest in the Westbury and Tasmanian Strategic Green Metals ionic adsorption clay (IAC) hosted rare earth elements (REE) projects located in northeast Tasmania, Australia with a total tenement area of approximately 800 kms2. Meryllion’s IAC REE projects are situated along strike, and/or adjacent to, discoveries by ABx Group Limited. ABx has reported that Tb (Terbium) and Dy (Dysprosium) concentrations in all of ABx’s rare earths resources are the highest of any ionic adsorption clay deposit in Australia and are amongst the highest globally. (refer ABx ASX announcement dated 5 May 2025).

For further information, please contact:

Mr. Richard Revelins Chief Executive Officer Meryllion Resources Corporation [email protected] +1-310-405-4475