Mirasol Resources Identifies Porphyry Cu Alteration System at Rubi Project in Chile
NEWS RELEASE
Suite 1150 – 355 Burrard Street, Vancouver, B.C. Canada, V6C 2G8
Tel: +1 604 602 9989 E-mail: [email protected]
www.mirasolresources.com
www.mirasolresources.com
November 8, 2021
Shares Issued and Outstanding: 53,872,043
TSX-V: MRZ
OTCPK: MRZLF
Mirasol Resources Identifies
Porphyry Cu Alteration System at Rubi Project in Chile
VANCOUVER, BC, November 8, 2021 — Mirasol Resources Ltd. (TSX-V: MRZ) (OTCPK: MRZLF ) (the
“Company” or “Mirasol”) reports on the results from a diamond drill program completed at the Rubi
porphyry Cu project (“Rubi”) in Chile, under an option agreement with Mine Discovery Fund (“MDF”).
Drilling focused on the Lithocap and Zafiro targets, with results clearly indicating the presence of a large
and strong prospective porphyry-style alterati on system . MDF has confirmed their continued
commitment to the project and a deep sensing Induced Polarization (“IP”) and magnetotellurics (“MT”)
geophysical program is planned to help focus follow-u p drilling on better mineralized porphyry
targets.
Tim Heenan, President of Mirasol, stated: “Rubi is located in a highly prospective neighborhood with
Codelco´s El Salvador Cu Mine just 20 km to the north and in a very similar geological environment.
We are pleased to continue working with MDF to explore the potential at Rubi. We look forward to
the upcoming geophysical campaign to help us refine targets for our next drill program.”
Joe Webb, Managing Director of MDF, added: “MDF is very encouraged with the results of the Phase I
drilling at Rubi. Drilling intersected strong phyllic and sulphide alteration, plus intense anhydrite
veining and sulphide mineralisation with increased alteration intensity to the south, possibly
representing a single multi-kilometre scale alteration system indicative of a large hydrothermal
system. MDF is looking forward to progressing exploration at Rubi.”
A total of 1,887m of core in 10 vertical and inclined (-70°) holes was completed, with 719m in
eight holes at Lithocap, and 1,168m in two holes at the Zafiro.
Figure 1: Plan map with drill hole collar locations and key targets
Summary of key porphyry Cu indicators identified:
Drill results indicate proximity to a potential covered and well mineralized porphyry Cu system, based
on: • The occurrence of porphyritic daci -andesite intrusive rocks and hydrothermal brecciation
exhibit strong quartz -sericite (phyllic) alteration overprinting now relict K -feldspar alteration
that host trace fine pyrite-chalcopyrite-magnetite mineralization.
• Good ground preparation, which is critical for mineral deposition with strong to locally intense
fracturing infilled with late gypsum/anhydrite and calcite veining.
• The presence of anomalous Cu, Mo and locally elevated As geochemistry results over substantial
intervals.
www.mirasolresources.com
Zafiro Target
The target at Zafiro is a blind porphyry Cu system defined by a magnetic high anomaly ringed by a
magnetic low, which is considered to represent a phyllic halo around a potential central altered potassic
mineralized porphyry. Only two holes RB-DD-001 and RB-DD-009, drilled some 660m apart, have been
completed into this large 2.8km by 2.2km target. Both holes appear to have successfully intersected,
below a thick (325-382m) sequence of cover Atacama gravels, the strong to locally intense phyllic
altered halo of porphyry-breccia system.
This drilling at Zafiro intersected a sequence of andesitic volcanic rocks intruded by a quartz monzonitic
diorite intrusive body, which has itself been intruded by younger dykes or small stocks of dacite to
andesite porphy ry. Phyllic alteration (peripheral and cooler temperature) in the dacite to andesite
porphyry intrusive rocks carry 1-3% pyrite hosted as veinlets and as disseminations, and appear to
overprint a potassium (proximal and higher temperature) feldspar alteration event. Petrological
(microscope) studies show fine chlorite-carbonate pyrite-chalcopyrite in veinlets hosted in the altered
andesite porphyry. Notably, hydrothermal breccias with high temperature magnetite-K feldspar-albite
alteration were intercepted, which locally host chalcopyrite-pyrite-specular hematite veining. Both the
younger porphyry stocks and the breccia units are prospective hosts for economic mineralization.
Assay results for both holes (RD- DD-001/009) returned weakly anomalous Cu (~105 ppm) over
significant intercepts (~200m), including a higher-grade 4m interval in hole RB-DD-001 from a phyllic
altered zone, which averaged 416 ppm Cu, and elevated As and Mo (640-1040 ppm and 7-11 ppm,
respectively). The daci-andesite porphyry in RB-DD-009 returned over a 47.6m interval 126 ppm Cu, 27
ppm Mo, 23 ppm Pb and 230 ppm Zn. These anomalous levels of Cu and associated metals are not
uncommon in peripheral porphyry environments. In addition, an epithermal signature (Hg, Sb, As, Bi,
Te) is present in the upper parts of RB-DD-009, and may represent an upper to mid-level of this partially
eroded porphyry system.
Lithocap Target
At the Lithocap target, seven short vertical holes (for 569m) were completed to sample bedrock under
shallow gravel cover to the west and south of the outcropping lithocap. The hydrothermal brecciation
and phyllic alteration intersected by these drill holes is the strongest encountered on the target to date
and indicates that the drilling is potentially closing in on the central more prospective part of this
porphyry system. Vectoring from the data provided from these drill holes combined with that from
previous drill holes at Rubi, led to a single vertical, deeper hole RB-DD-010 also being drilled.
Hole RB-DD-010 returned the most interesting results to date at Lithocap, intersecting strongly clay
weathered and crackle brecciated andesite with 2-5% jarosite with strong associated
goethite/hematite, beneath 90m of loosely consolidated gravel cover. Below the oxidation level
(132m), 4-10% pyrite occurs as disseminations and veinlets in hydrothermal breccias and their crackle
brecciated margins. These hydrothermal breccias were observed interfingering with weakly altered
andesite over the entire 155.7m of intersected bedrock, perhaps suggesting that RB-DD-010
intersected the margins of a breccia system.
Late gypsum/anhydrite veining is intensely developed and forms up to 30% of the volume in bedrock.
Similar late gypsum/anhydrite veining was encountered in previous drilling to the north
(RUBRD14_016, RUBRD14_001, RUBRD14_015). In both targets, these strongly fractured rocks with the
Suite 1150 – 355 Burrard Street, Vancouver, B.C. Canada, V6C 2G8
Tel: +1 604 602 9989 E-mail: [email protected]
www.mirasolresources.com
Suite 1150 – 355 Burrard Street, Vancouver, B.C. Canada, V6C 2G8
Tel: +1 604 602 9989 E-mail: [email protected]
www.mirasolresources.com
www.mirasolresources.com
latter gypsum/anhydrite infill could indicate the hydraulically fractured outer shell (carapace) of a
concealed porphyry system.
Assays from hole RB -DD-010 returned anomalous Cu and Mo over the entire extent of bedrock
intercepted (155.7m from 89.9 to 245.6m), with weighted averages of 124 ppm Cu and 2.2 ppm Mo
(ranging from 25 – 334 ppm and from 0.4 – 12ppm respectively).
Further work is planned at Zafiro and Lithocap which will include deep sensing IP and MT geophysical
surveys to help to define the target for drill testing early in 2022.
About Mirasol Resources Ltd
Mirasol is a well -funded exploration company focused in Chile and Argentina. Mirasol has seven
partner-funded projects, with Newcrest Mining Ltd (Chile), First Quantum Minerals (Chile), Mine
Discovery Fund (Chile), Mineria Activa (Chile), Silver Sands Resources (Argentina), Patagonia Gold
(Argentina) and Golden Arrow (Argentina). Mirasol is currently self-funding exploration at Sobek (Chile),
Inca Gold (Chile) and Sacha Marcelina (Argentina).
For further information, contact:
Tim Heenan, President
or
Jonathan Rosset, VP Corporate Development
Tel: +1 (604) 602-9989
Email: [email protected]
Website: www.mirasolresources.com
Qualified Person Statement: Mirasol’s disclosure of technical and scientific information in this press release has been
reviewed and approved by Tim Heenan (MAIG), the interim President for the Company, who serves as a Qualified Person
under the definition of National Instrument 43-101.
QAQC: Mirasol applies industry standard exploration sampling methodologies and techniques. All geochemical rock samples
are collected under the supervision of the company’s geologists in accordance with industry practice. Ge ochemical assays
are obtained and reported under a quality assurance and quality control (QA/QC) program with insertions of controls
(standards, blanks and duplicates) submitted to the laboratory. Samples were dispatched to ALS Global - Geochemistry
Analytical Lab, in Santiago, Chile, an ISO 9001:2015 accredited laboratory, which is independent from the Company. Drill
core samples have a minimum length of 0.47m and a maximum of 2.10m. To guarantee the chain of custody, the samples
are delivered to the laboratory by the qualified personnel of the Company. The drilling diameters used in the drill holes are
HQ (63.5 mm internal diameter) and NQ (47.6 mm internal diameter). Samples were prepared with PREP-31 procedure and
analysed by AU-ICP21 and ME-MS61m.
Forward Looking Statements: The information in this news release contains forward looking statements that are subject to
a number of known and unknown risks, uncertainties and other factors that may cause actual results to differ materially
from those anticipated in our forward -looking statements. Factors that could cause such differences include: changes in
world commodity markets, equity markets, costs and supply of materials relevant to the mining industry, change in
government and changes to r egulations affecting the mining industry and to policies linked to pandemics, social and
environmental related matters. Forward-looking statements in this release include statements regarding future exploration
programs, operation plans, geological interpr etations, mineral tenure issues and mineral recovery processes. Although we
believe the expectations reflected in our forward -looking statements are reasonable, results may vary, and we cannot
guarantee future results, levels of activity, performance or ac hievements. Mirasol disclaims any obligations to update or
Suite 1150 – 355 Burrard Street, Vancouver, B.C. Canada, V6C 2G8
Tel: +1 604 602 9989 E-mail: [email protected]
www.mirasolresources.com
www.mirasolresources.com
revise any forward-looking statements whether as a result of new information, future events or otherwise, except as may
be required by applicable law.
Neither the TSX Venture Exchange nor its Regul ation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Suite 1150 – 355 Burrard Street, Vancouver, B.C. Canada, V6C 2G8
Tel: +1 604 602 9989 E-mail: [email protected]
www.mirasolresources.com
www.mirasolresources.com
Figure 1