Montero Reports 33 Metres of 1.07% Lithium from Reverse Circulation Chips at the Soris Lithium Project IN Namibia
MONTERO REPORTS 33 METRES OF 1.07% LITHIUM FROM REVERSE CIRCULATION CHIPS
AT THE SORIS LITHIUM PROJECT IN NAMIBIA
Toronto, Ontario – November 28, 2017 – Montero Mining and Exploration Ltd. (TSX-V: MON) has received positive
lithium assay results from reverse circulation (RC) chips from a prior operators RC drill program at the Soris Lithium
project. The prior operators RC drill program only assayed for the tantalum , tin and niobium content of the
pegmatite and did not assay for lithium. Montero’s initial sampling program of RC chips indicates that the previously
untested lithium bearing spodumene mineralization sampled at the surface also occurs at depth in the pegmatites
on the property.
In 2015 a prior explorer completed a total of 31 RC drill holes testing only for tantalum and tin in the Main and
Southern pegmatite occurrences on the property (see map below). A total of 1,536 samples were taken from these
holes which were sampled every metre where pegmatite was intersected. 1,095 of these samples have been
matched to 26 of the historical RC holes. The pulps from the 1 metre samples were originally submitted for chemical
analysis for tantalum and tin at Genalysis in Perth, Australia. Montero then subsequently requested analyses for
Lithium, Cesium and Rubidium from sample pulps at the same laboratory.
Montero has just received RC drill sampling assays for lithium on two drill holes, namely RCDD04 drilled vertica lly
and RCDD022 drilled at an inclination of -60 degrees by a prior operator in the Main zone of mineralized pegmatite.
The balance of the Lithium assay results are due to be reported. The results indicate that lithium bearing spodumene
mineralization sampled at the surface extends to depth. Initial results were returned as follows:
RC From To Width in Lithium Tantalum Tin Cesium Rubidium
Drill Hole (m) (m) Metres Li2O a
(%)
Ta2O5 b
(ppm)
SnO2 c
(ppm)
Cs2O d
(ppm)
Rb2O e
(ppm)
RCDD022 14 47 33 1.07 139 576 61 1670
RCDD04 57 93 36 0.94 131 823 121 1906
a. Li2O obtained by conversion factor of 2.153
b. Ta2O5 obtained by conversion factor of 1.2211
c. SnO2 obtained by conversion factor of 1.2696
d. Cs2O obtained by conversion factor of 1.06
e. Rb2O obtained by conversion factor of 1.094
Sample intervals are indicative of apparent pegmatite widths only.
Montero has an agreement to acquire an 80% interest in the Property by committed to spending C$1 million and
completing a feasibility study within 3 years of transfer of the mining rights. Montero is awaiting positive results
from further testing to exercise the option.
Dr. Tony Harwood, President and Chief Executive Officer of Montero commented, “Montero has identified significant
widths of lithium bearing spodumene mineralization at surface and at depth where prior operators only assayed for
tantalum and tin. Recent sampling of RC chips from the prior operator returned 33 metres of 1.07% lithium oxide in
spodumene pegmatite thereby providing a third dimension which Montero will use to establish a resource. Montero
has now submitted all of the intercepts from RC drill holes for analyses. Further results are expected shortly.”
MAP SHOWING LOCATION OF PEGMATITES AND RC DRILLING BY PRIOR OPERATORS.
The Soris Lithium Project is in central Namibia , north-west of the town Uis which is 220km north of Walvis Bay,
Namibia’s largest commercial deep -water port. The project is in the Erongo Region and is connected by dirt and
asphalt road to the port of Walvis Bay.
The zoned pegmatites at the Soris Lithium Project belong to a group of highly fractionated, tantalite -cassiterite,
lithium-rich rare metal pegmatites known as Lithium-Cesium-Tantalum (LCT) pegmatites. The Soris pegmatites were
previously mined on a small scale for tin and tant alum (Diehl, 1992). The pegmatite has not been mined or
systematically sampled or assayed for lithium.
Montero’s first channel sampling program indicate Lithium, tantalum and tin mineralization over a 2.4 km strike
length of exposed pegmatite. Channel MC1 returned 14m at an average grade of 1.93 % Li2O where the best
individual sample assayed 3.66% Li2O. Subsequent sampling of a portion of RC drill chips f rom a prior operator
indicates lithium bearing spodumene extends to depth and occurs over significant widths. Montero is beginning to
compile all of the data recently acquired to facilitate designing a drill program to establish a resource.
Qualified Person's Statement
This press release was reviewed and approved by Mr. Mike Evans, M.Sc. Pr.Sci.Nat ., who is a qualified person for
the purpose of National Instrument 43 -101 and a Consulting Geologist to Montero. A review was also undertaken
by Nico Scholtz, Pr.Sci.Nat., a qualified person for the purpose of National Instrument 43 -101 and has extensive
experience in rare metal pegmatite exploration and Lithium-Cesium-Tantalum (LCT) pegmatites.
About Montero
Montero is a mineral exploration and development company engaged in the identification, acquisition, evaluation
and exploration of mineral properti es in Africa. Currently these include Lithium, Tantalum and Tin in Namibia,
Phosphates in South Africa and Rare Earth Elements (REE) in Tanzania. Montero is reviewing and evaluating other
opportunities from its operating base in South Africa. Montero trade s on the TSX Venture Exchange under the
symbol MON.
For more information, contact:
Montero Mining and Exploration Ltd.
Dr. Tony Harwood, President and Chief Executive Officer
E-mail: [email protected]
Tel: +1 416 840 9197 | Fax: +1 866 688 4671
www.monteromining.com
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts
responsibility for the adequacy or accuracy of this release.
CAUTIONARY STATEMENT REGARDING FORWARD -LOOKING INFORMATION: This news release includes certain "forward -looking information"
within the meaning of applicable Canadian securities laws . Forward looking information includes, but is not limited to, statements, projections
and estimates with respect to the Share Consolidation . Generally, forward-looking information can be ident ified by the use of forward -looking
terminology such as “plans”, “expects” or “does not expect”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”,
“anticipates” or “does not anticipate”, or “believes”, or variations of such words and phrases or state that certain actions, events or results “may”,
“could”, “would”, “might” or “will be taken”, “occur” or “be achieved”. Such information is based on information currently available to Montero
and Montero provides no assurance that actual results will meet management's expectations. Forward-looking information by its very nature
involves inherent risks and uncertainties that may cause the actua l results, level of activity, performance, or achievements of Montero to be
materially different from those expressed or implied by such forward-looking information. Actual results relating to, among other things, results
of exploration, project development, reclamation and capital costs of Montero’s mineral properties, and financial condition and prospects, could
differ materially from those currently anticipated in such statements for many reasons such as: changes in general economic c onditions and
conditions in the financial markets; changes in demand and prices for minerals; litigation, legislative, environmental and other judicial, regulatory,
political and competitive developments; technological and operational difficulties encountered in connection with Montero’s activities; and other
matters discussed in this news release and in filings made with securities regulators. This list is not exhaustive of the factors that may affect any
of Montero’s forward-looking statements. These and other factors should be considered carefully and accordingly, readers should not place undue
reliance on forward-looking information. Montero does not undertake to update any forward -looking information, except in accordance with
applicable securities laws.