Meridian Reports Further Broad Shallow Zones of Mineralization at Cabaçal Including CD-535
8th Floor, 4 More London Riverside | London SE1 2AU | United Kingdom
Meridian Reports Further Broad Shallow Zones of Mineralization at Cabaçal Including CD-535
- 21.6m @ 3.1g/t AuEq / 2.1% CuEq from 85m
Multiple targets for Cabaçal-type Cu-Au repeats identified along the 10km Mine Corridor
LONDON, United Kingdom, September 4 , 202 4 / Accesswire / Meridian Mining UK S ( TSX: MNO ),
(Frankfurt/Tradegate: 2MM) (OTCQX: MRRDF) (“Meridian” or the “Company”) is pleased to announce
further strong results from its Cabaçal Cu-Au-Ag project (“Cabaçal”) . Wide zones of Cu -Au-Ag
mineralization continue to be defined, highlighted by CD-535 returning 21.6m @ 3.1g/t AuEq / 2.1% CuEq,
and CD-529 returning 16.1m @ 2.8g/t AuEq / 1.9% CuEq (“Figure 1”), within the open pit area1. Further
results from Cabaçal, Santa Helena and the Mine Corridor drill programs are pending.
A detailed review of the Cabaçal drill program’s results has identified multiple structural inflexions along
the 2km strike length of the deposit, within which, the bulk of the Cu-Au-Ag mineralization is found. The
Company has reviewed its geophysical data, and identified multiple signs for repeats of these structures,
down dip of the mine and importantly extending along the 10km Mine Corridor (“Figure 2”). These new
targets can be considered prospective for repeats for Cu-Au mineralization, and exploration programs to
drill test these structures are advancing.
HIGHLIGHTS REPORTED TODAY
• Meridian reports further broad, shallow copper, gold, and silver results from the Cabaçal deposit;
o CD-535 (CCZ): 21.6m @ 3.1g/t AuEq / 2.1% CuEq from 85.0m; Including:
7.2m @ 5.5g/t AuEq / 3.7% CuEq from 99.4m;
o CD-534 (CCZ): 25.9m @ 1.4g/t AuEq / 0.9% CuEq from 80.8m; including:
2.1m @ 5.1g/t AuEq / 3.4% CuEq from 82.2m;
4.2m @ 2.9g/t AuEq / 2.0% CuEq from 102.6m;
o CD-529 (ECZ): 16.1m @ 2.8g/t AuEq / 1.9% CuEq from 92.1m; including:
4.9m @ 4.3g/t AuEq / 2.9% CuEq from 98.0m;
o CD-517 (SCZ): 33.4m @ 1.0g/t AuEq / 0.7% CuEq from 103.2m; including:
4.4m @ 1.9g/t AuEq / 1.3% CuEq from 119.1m; and
5.5m @ 2.4g/t AuEq / 1.6% CuEq from 130.4m.
• Multiple new targets for Cu-Au mineralization host structures generated in Cabaçal Mine Corridor;
o Identification of structural flexures hosting strongest Cu -Au mineralization within the Cabaçal
deposit increases the ability to target exploration efforts towards the VMS belt for further
potential discovery;
o Multiple untested greenfield targets with the potential for Cabaçal repeats following the trend
of the district scale tonalite intrusion, initially identified over the 10km Mine Corridor; and
o Down dip extension of local flexures to be tested for potential underground extensions of Cabaçal
Cu-Au deposit.
*See technical note for true thickness estimate and separate AuEq and CuEq equations.
1 See Cabaçal Gold-Copper Project NI 43-101 PEA March 30, 2023, https://meridianmining.co/cabacal/
Mr. Gilbert Clark, CEO, comments: “ It is pleasing to report once again that drilling at Cabaçal has
intercepted ten’s of meters of robust copper-gold-silver mineralization starting at shallow depths. We
have taken a large step forward in opening the belt’s exploration upside by unlocking the local structural
“inflexions” that host Cabaçal’s mineralization. Understanding this local control on mineralization has
allowed our geologist to identify, target and rank our belt’s exploration upside. As our programs have
shown, Cabaçal is one of the very few advanced Cu-Au VMS belts, where the emerging greenfields upside
remains intact, largely untested and is centred around a stand -alone asset; the hub and spoke
development model.”
Figure 1: Cabaçal drill highlights
CABAÇAL DRILL RESULTS
Cabaçal’s drill programs2 continue to deliver a flow of solid gold -copper-silver results across the
deposit(“Table 1”; Figure 1”). CD-535’s 21.6m @ 3.1g/t AuEq including 7.2m @ 5.5g/t AuEq showed the
presence of strong intact zones of mineralization in the southern sector of the mine where further
definition is ongoing in areas of wider spaced drilling. The focus of drilling is now contributing to final
stages of mine planning and on targeting areas where data has been historically lost in whole or in part,
along with some infill of areas of wider spaced drilling.
CABAÇAL ANALOGUE FOR NEAR-MINE EXPLORATION
The drilling to date has now provided a good framework for evaluating the geometric relationships
between mineralization and rheological contacts – particularly the interface between the mine sequence
and the felsic volcanic footwall ( the “TAC”), where better grades a re associated with inflexions in the
contact and intersections between the northwest Mine Corridor trend and cross-structures. In developing
gold exploration target s in particular, the Meridian team has scrutinized the developing datasets for
inflexions and intersections in basement trends, as it has become increasingly apparent that the Cabaçal
deposit and the gold overprint event is particularly precipitated at sites where the TAC flattens and is
locally deflected from a north -western to a more east-western strike orientation. Aerial magnetic data
shows a number of analogue deflections of similar character to that evident at Cabaçal (“Figure 2”).
Figure 2: Mine Corridor magnetic map.
The gravity data shows Cabaçal localized in a n orthwest-striking gravity low , again with a slight
counterclockwise rotation from the dominant regional trend (“Figure 3”). A second gravity low, virtually
undrilled, is positioned to the southwest of Cabaçal and , separate regional inflexions are seen in the
2 Meridian Mining News release of January 10, 2024.
gravity pattern in the southern sector of the Chiquito region, and in the Sucuri area where the belt deflects
to an east-western trend. These initial prospects will now be subject to a full suite of field exploration
techniques including diamond drilling.
Figure 3: Gravity map of the Cabaçal Mine Corridor and adjacent Álamo licence to the east.
ABOUT MERIDIAN
Meridian Mining is focused on:
• The development and exploration of the advanced stage Cabaçal VMS gold-copper project;
• The initial resource definition at the second high -grade VMS asset at Santa Helena as first stage
of Hub and Spoke development strategy;
• Regional scale exploration of the Cabaçal VMS belt to expand the Hub and Spoke strategy; and
• Exploration in the Jaurú & Araputanga Greenstone belts (the above all located in the State of Mato
Grosso, Brazil).
The Preliminary Economic Assessment technical report (the “PEA Technical Report”) dated March 30,
2023, entitled: "Cabaçal Gold -Copper Project NI 43 -101 Technical Report and Preliminary Economic
Assessment, Mato Grosso, Brazil” outlines a base case after-tax NPV5 of USD 573 million and 58.4% IRR
from a pre -production capital cost of USD 180 million, leading to capital repayment in 10.6 months
(assuming metals price scenario of USD 1,650 per ounces of gold, USD 3.59 per pound of copper, and USD
21.35 per ounce of silver). Cabaçal has a low All-in-Sustaining-Cost of USD 671 per ounce gold equivalent
for the first five years, driven by high metallurgical recovery, a low life -of-mine strip ratio of 2.1:1, and
the low operating cost environment of Brazil.
The Cabaçal Mineral Resource estimate consists of Indicated resources of 52.9 million tonnes at 0.6g/t
gold, 0.3% copper and 1.4g/t silver and Inferred resources of 10.3 million tonnes at 0.7g/t gold, 0.2%
copper & 1.1g/t silver (at a 0.3 g/t gold equivale nt cut-off grade). Santa Helena mine area generated an
initial Exploration Target with a tonnage range of 3.2 –7.2 Mt grading between 3.0 - 3.2g/t AuEq*, which
gives a potential high-grade metal inventory range of between 306,000 to 763,000 AuEq ounces, located
within 10km of the proposed Cabaçal mill site.
Readers are encouraged to read the PEA Technical Report in its entirety. The PEA Technical Report may
be found on the Company's website at www.meridianmining.co and under the Company's profile on
SEDAR+ at www.sedarplus.ca.
The qualified persons for the PEA Technical Report are: Robert Raponi (P. Eng), Principal Metallurgist with
Ausenco Engineering), Scott Elfen (P. E.), Global Lead Geotechnical and Civil Services with Ausenco
Engineering), Simon Tear (PGeo, EurGeol), Principal Geological Consultant of H&SC, Marcelo Batelochi,
(MAusIMM, CP Geo), Geological Consultant of MB Geologia Ltda, Joseph Keane (Mineral Processing
Engineer; P.E), of SGS, and Guilherme Gomides Ferreira (Mine Engineer MAIG) of GE21 Consultoria
Mineral.
On behalf of the Board of Directors of Meridian Mining UK S
Mr. Gilbert Clark - CEO and Director
Meridian Mining UK S
Email: [email protected]
Phone: +1 778 715-6410 (BST)
Twitter: https://twitter.com/MeridianMining
Stay up to date by subscribing for news alerts here: https://meridianmining.co/subscribe/
Further information can be found at: www.meridianmining.co
Technical Notes
Samples have been analysed at ALS laboratory in Lima, Peru. Samples are dried, crushed with 70% passing
85% passing 200µm. Routine gold analyses have been conducted by Au- AA24 (fire assay of a 50g charge
with AAS finish). High-grade samples (>10g/t Au) are repeated with a gravimetric finish (Au-GRA22), and
base metal analysis by methods ME -ICP61 and OG62 (four acid digest with ICP -AES finish). Visible gold
intervals are sampled by metallic screen fire assay method Au-SCR21. Samples are held in the Company’s
secure facilities until dispatched and delivered by staff and commercial couriers to the laboratory. Pulps
and coarse rejects are retained and returned to the Company for storage. The Company submits a range
of quality co ntrol samples, including blanks and gold and polymetallic standards supplied by Rocklabs,
ITAK and OREAS, supplementing laboratory quality control procedures. Approximately 5% of archived
samples are sent for umpire laboratory analysis, including any lots exhibiting QAQC outliers after
discussion with the laboratory. In BP Minerals sampling, gold was analysed historically by fire assay and
base metals by three acid digest and ICP finish at the Nomos laboratory in Rio de Janeiro. Silver was
analysed by aqua regia digest with an atomic absorption finish. True width is considered to be 80 -90% of
intersection width. Assay figures and intervals are rounded to 1 decimal place. Gold equivalents for
Cabaçal are calculated as: AuEq(g/t) = (Au(g/t) * %Recovery) + (1.4 92*(Cu% * %Recovery)) +
(0.013*(Ag(g/t) * %Recovery)), and Copper equivalents are calculated as: CuEq(%) = (Cu(%) * %Recovery)
+ (0.670*(Aug/t * %Recovery)) + (0.0087*(Ag(g/t) * %Recovery)) where:
• Au_recovery_ppm = 5.4368ln(Au_Grade_ppm)+88.856
• Cu_recovery_pct = 2.0006ln(Cu_Grade_pct)+94.686
• Ag_recovery_ppm = 13.342ln(Ag_Grade_ppm)+71.037
Recoveries based on 2022 metallurgical testwork on core submitted to SGS Lakefield
Qualified Person
Mr. Erich Marques, B.Sc., FAIG, Chief Geologist of Meridian Mining and a Qualified Person as defined by
National Instrument 43-101, has reviewed, and verified the technical information in this news release.
FORWARD-LOOKING STATEMENTS
Some statements in this news release contain forward-looking information or forward-looking statements
for the purposes of applicable securities laws. These statements address future events and conditions and
so involve inherent risks and uncertainties, as disclosed under the heading "Risk Factors" in Meridian's
most recent Annual Information Form filed on www.sedarplus.ca. While these factors and assumptions
are considered reasonable by Meridian, in light of management’s experience and perception of current
conditions and expected developments, Meridian can give no assurance that such expectations will prove
to be correct. Any forward-looking statement speaks only as of the date on which it is made and, except
as may be required by applicable securities laws, Meridian disclaims any intent or obligation to update
any forward -looking statement, whether as a result of new info rmation, future events, or results or
otherwise.
Table 1: Assay results reported in this release.
Hole-id Dip Azi EOH Zone Int AuEq CuEq Au Cu Ag From
(m) (m) (g/t) (%) (g/t) (%) (g/t) (m)
CD-550 -50 058 136.0 CWNE
2.2 1.7 1.1 0.4 1.0 4.3 27.5
3.2 0.3 0.2 0.2 0.1 0.5 38.1
5.4 0.6 0.4 0.2 0.3 0.9 81.0
2.8 0.3 0.2 0.1 0.2 0.3 89.2
2.7 0.9 0.6 0.1 0.5 1.8 96.0
14.9 0.4 0.3 0.1 0.2 1.3 100.9
CD-547 -50 068 100.1 CWNE
1.4 0.4 0.2 0.0 0.2 0.8 16.5
2.6 0.6 0.4 0.0 0.4 0.6 21.8
7.0 0.5 0.3 0.0 0.3 0.5 28.1
1.9 0.7 0.5 0.8 0.0 0.7 45.8
6.8 0.3 0.2 0.1 0.1 0.2 65.7
4.1 0.7 0.5 0.5 0.2 1.0 75.5
CD-546 -60 041 100.6 ECZ
5.8 0.6 0.4 0.0 0.4 1.2 9.6
1.2 0.6 0.4 0.0 0.4 0.6 22.0
4.5 0.5 0.3 0.1 0.3 0.5 26.0
2.4 0.5 0.3 0.1 0.3 0.3 36.1
1.4 0.3 0.2 0.2 0.1 0.3 47.0
0.3 0.5 0.3 0.1 0.3 0.4 50.8
2.3 1.4 1.0 0.4 0.8 4.1 53.6
2.5 0.5 0.4 0.1 0.3 1.4 62.0
0.4 1.2 0.8 0.3 0.7 4.0 66.7
0.7 0.7 0.5 0.1 0.4 3.2 70.9
CD-541 -60 045 100.6 SCZ
3.5 0.4 0.2 0.0 0.2 0.4 27.8
1.8 3.3 2.2 0.9 1.6 4.2 33.5
5.0 0.9 0.6 0.6 0.3 1.6 53.4
6.0 0.3 0.2 0.1 0.2 0.8 61.7
8.1 0.6 0.4 0.3 0.3 1.4 73.2
CD-535 -79 228 119.5 CCZ
7.6 0.3 0.2 0.0 0.2 0.7 29.9
20.1 0.4 0.3 0.0 0.3 0.4 42.3
21.6 3.1 2.1 1.2 1.3 4.0 85.0
Including 1.6 13.3 8.9 3.3 6.6 29.1 105.1
Including 7.2 5.5 3.7 1.8 2.5 9.2 99.4
CD-534 -62 041 115.1 CCZ
17.9 0.6 0.4 0.0 0.4 0.9 22.6
17.7 0.8 0.6 0.1 0.5 0.3 60.0
Including 1.9 2.2 1.4 0.5 1.2 0.9 61.5
Hole-id Dip Azi EOH Zone Int AuEq CuEq Au Cu Ag From
(m) (m) (g/t) (%) (g/t) (%) (g/t) (m)
25.9 1.4 0.9 0.5 0.7 3.0 80.8
Including 2.1 5.1 3.4 2.5 1.8 4.8 82.2
Including 4.2 2.9 2.0 0.7 1.5 10.4 102.6
CD-531 -49 040 120.5 ECZ
12.0 0.5 0.4 0.0 0.4 1.1 14.1
6.9 0.7 0.4 0.1 0.4 0.9 58.6
24.0 1.0 0.7 0.2 0.6 2.8 70.1
Including 3.0 3.2 2.1 0.7 1.7 10.1 83.5
1.5 1.0 0.7 0.2 0.6 4.6 104.7
CD-529 -47 085 120.1 ECZ
15.1 0.9 0.6 0.0 0.6 1.2 13.4
1.1 1.2 0.8 0.1 0.8 1.2 31.9
1.8 0.3 0.2 0.0 0.2 0.8 36.6
18.3 0.6 0.4 0.1 0.4 1.2 43.0
7.8 1.1 0.7 1.0 0.1 0.7 71.0
16.1 2.8 1.9 0.7 1.4 5.9 92.1
Including 4.9 4.3 2.9 1.2 2.1 8.7 98.0
CD-528 -45 057 91.2 CWNE
2.1 0.4 0.3 0.4 0.1 0.1 30.0
17.0 0.9 0.6 0.6 0.2 1.6 40.7
Including 1.1 4.8 3.2 4.5 0.3 0.5 47.2
Including 0.6 4.8 3.2 0.6 2.7 30.5 55.1
1.2 0.6 0.4 0.1 0.3 3.8 60.8
1.3 1.0 0.7 0.3 0.5 6.9 73.5
CD-527 -60 058 126.1 CCZ
33.8 0.6 0.4 0.0 0.4 1.1 14.1
4.6 0.7 0.5 0.4 0.3 0.5 49.9
5.2 0.4 0.3 0.2 0.2 0.5 57.5
3.4 0.5 0.4 0.2 0.3 0.4 75.1
10.0 1.0 0.7 0.2 0.6 2.2 89.6
Including 2.4 3.2 2.1 0.6 1.8 8.5 97.2
12.8 1.2 0.8 0.5 0.5 2.2 103.8
Including 6.6 1.8 1.2 0.8 0.7 3.0 107.1
CD-526 -50 042 100.2 ECZ
4.2 0.3 0.2 0.0 0.2 0.5 37.3
7.1 0.6 0.4 0.1 0.4 0.3 43.9
1.8 0.3 0.2 0.0 0.2 0.3 55.6
7.2 0.7 0.5 0.1 0.4 1.6 60.7
6.8 1.2 0.8 0.3 0.7 2.1 75.8
CD-525 -49 058 112.7 CWNE
3.8 0.5 0.4 0.5 0.1 0.1 18.1
2.8 0.4 0.3 0.4 0.0 0.1 36.5