Meridian encounters wide intervals of mineralisation at Cabaçal's Southern and Eastern Copper Zones
Meridian encounters wide intervals of
mineralisation at Cabaçal's Southern and
Eastern Copper Zones
/NOT FOR DISTRIBUTION TO U.S. NEWS WIRE SERVICES OR FOR DISSEMINATION IN THE
U.S./
Diamond drilling and geophysical programs continue to advance.
LONDON
,
March 29, 2021
/CNW/ - Meridian Mining UK S (TSXV: MNO) ("Meridian" or the
"Company") today announces that the drill and surface geophysical programs have advanced at its
Cabaçal copper-gold project in
Mato Grosso, Brazil
with the completion of the first two diamond
holes of the approximate seventy drill hole program Figure 1. The first diamond drill hole ("DDH")
CD-001 targeting the Southern Copper Zone ("SCZ") has been concluded to a depth of
189.55m
by
Rig One. Rig Two concluded CD-002 as an initial test the Easter Copper Zone ("ECZ") and was
completed to a depth of
95.2m
. Assays from the first two holes are pending. The surface
electromagnetic ("EM") program is completed and has defined the Cabaçal mine sequence's
response that extends past the historic mine limits. The Company has also signed a technical
exchange agreement with the Universidade Federal de
Mato Grosso
("UFMT") accessing its
historical core collection from Cabaçal.
Highlights of the exploration program's rollout:
Both holes CD-001 and CD-002 have intersected intact Cabaçal mine's host stratigraphy:
Rig 1 cored intervals of SCZ's disseminated, stringer (Photo 1-A), and breccia styles of
sulphide mineralization (chalcopyrite-pyrrhotite-pyrite) extending from
50.16m
to
151.65m
downhole;
Rig 2 cored intervals of ECZ's disseminated to stringer (Photo 1-B) and breccia styles of
sulphide mineralization (chalcopyrite-pyrrhotite-pyrite) extending from
39.7m
to
63.9m
downhole;
Rig 2 is now moving to the SCZ alongside Rig 1 to start a fan of holes into this zone to
target Cu-Au and to provide platforms for defining and testing electromagnetic responses;
and
The orientated fixed-loop surface EM survey over the Cabaçal mine and extending southwards
is concluded with the data now being processed by Core Geophysics:
An EM anomaly extending ~100-
200m
south of the Cabaçal Mine area has been defined.
The response is consistent with the broad footprint of disseminated to stringer sulphide;
Work will be undertaken to calibrate this response with the regional VTEM data to consider
definition of anomalies at a similar threshold;
Bore Hole EM is progressing off CD-001 & CD-002 to target conductivity response
consistent with stringer / breccia sulphide zones in the targeted areas; and
Initial analysis indicates that the fixed loop survey has sharpened the definition of the
southern VTEM conductor. Final modelling in progress following finalization of survey data.
Agreement with UFMT
Access to historical Cabaçal diamond cores for re-assaying and re-logging diamond core;
Technical exchange program for undergraduates focused on the mining industry.
CD-001 and CD-002 Sample Cores (CNW Group/Meridian Mining S.E.)
CD-001 was collared above the SCZ and projecting ~
80m
south of the limit of historical workings
based on digitized records of historical selective room and pillar mine development. The hole was
drilled from the historical drill pad of JUSPD 596, which intersected
15m
@ 5.20% Cu, 2.66g/t Au,
9.54 g/t Ag. CD-001 was drilled HQ through the saprolite and upper bedrock and reduced to NQ.
The hole intersected the "CTB" mine sequence unit - a foliated meta-volcaniclastic horizon, with
disseminated sulphides and local stringer mineralisation, from
50m
downhole, and continued to the
acid volcanic footwall ("TAC") from
151.6m
. As standard practice CD-001 is now being surveyed to
check the down hole trajectory.
CD-002 was collared above the ECZ, ~
50m
west of an exploratory branch of the historical mine
workings, into an area where this sequence becomes more copper dominant. Part of the mine
stratigraphy here projects below a sub-horizontal gabbroic sill that blocks all surface expression or
soil anomaly of the Eastern Copper Zone. The hole was drilled from the historic pad of JUSDP 228,
which intersected
23.03m
@ 0.95% Cu, 0.3g/t Au, 7g/t Ag, including 3.18, @ 4.45% Cu, 1.36g/t Au,
39.06g/t Ag. Adjacent holes in historical cross sections show the projection of stringer sulphide
zones, with verification drilling required in some areas where historical assays are not available. CD-
002 confirms that the ECZ remains open and requires further drilling. The 1990 Mason and Kerr
targeting study stresses that testing the extension of this sequence to the east is a high priority
exploration target, for the potential of a fourth centre of focussed copper-gold vein systems as part
of a larger hydrothermal discharge field: "
We cannot stress enough the importance of exhaustive
exploration for VMS-related mineralization at this highly-productive CTB/TAC contact horizon
". CD-
002 was drilled HQ to end of hole and intersected a
24.2m
wide package of CTB stratigraphy with
disseminated to stringer and breccia sulphides.
Rig 2 initially focused on the ECZ while Rig One's DDH CD-001 was completed, providing the
platform for the first Bore Hole EM survey targeting the zones of strong Cu-Au mineralisation
historically drilled from surface and underground. There is some spatial variance in the exact position
of these intersections, and with the precise position of the surface collars no longer visible on the
two historical drill pads (and limited historical down-hole survey information). Bore Hole EM is being
conducted as a vectoring tool to better orientate the surface program to more concentrated stringer
to brecciated/stockwork sulphide concentrations within the SCZ. Once this zone's program is
completed the drill program will then proceed with a combination of twinning, infill and extension
drilling on the program's other known targets.
Figure 1: Location of DDH over VTEM conductivity grid; and strike extension of fixed loop surface
EM survey. (CNW Group/Meridian Mining S.E.)
Dr
Adrian McArthur
, CEO, states, "I congratulate the technical and administrative team on initiating
the concurrent geophysical and drilling programs at a time at Cabaçal so promptly after receiving the
environmental. The core is being cut for dispatch and we soon will be receiving a steady stream of
assays and other analytical data. The geophysical orientation work over the Cabaçal deposit has
shown great promise. We will extent geophysical trails using the company's own IP equipment as a
parallel tool for testing for Cabaçal's style of EM responses in addition to the established VTEM
targets. BHEM will be an important tool and ongoing work will be conducted in campaigns, with a
particular focus on areas of structural complexity such as the southern copper zone with the shallow-
east dipping stratigraphy interacts with the steep NE-striking Alpha Fault. Via the agreement with
UFMT we can now have access to their Cabaçal core library and re-assay it as part of the
verification of the historical drill results and collaborate in field programs and technical studies at
Cabaçal."
QUALIFIED PERSON
Dr.
Adrian McArthur
, B.Sc. Hons, PhD. FAusIMM., CEO and President of Meridian Mining as well as
a Qualified Person as defined by National Instrument 43-101, has supervised the preparation of the
technical information in this news release.
On behalf of the Board of Directors of Meridian Mining UK S
Dr.
Adrian McArthur
CEO, President and Director
Meridian Mining UK S
Email:
Ph: +1 (778) 715-6410 (PST)
Stay up to date by subscribing for news alerts here:
https://meridianmining.co/subscribe/
Follow Meridian on Twitter:
https://twitter.com/MeridianMining
Further information can be found at
www.meridianmining.co
ABOUT MERIDIAN
Meridian Mining UK S is focused on the acquisition, exploration and development activities in
Brazil
.
The Company is currently focused on developing the Cabaçal VMS Copper-Gold project in the state
of
Mato Grosso
; exploring the Espigão polymetallic project, the Mirante da Serra manganese
project, and the Ariquemes tin portfolio in the State of Rondônia
Brazil
.
FORWARD-LOOKING STATEMENTS
Some statements in this news release contain forward-looking information or forward-looking
statements for the purposes of applicable securities laws. These statements include, among others,
statements with respect to the Company's plans for exploration, development and exploitation of its
properties and potential mineralisation. These statements address future events and conditions and,
as such, involve known and unknown risks, uncertainties and other factors, which may cause the
actual results, performance or achievements to be materially different from any future results,
performance or achievements expressed or implied by the statements. Such risk factors include,
among others, failure to obtain regulatory approvals, failure to complete anticipated transactions, the
timing and success of future exploration and development activities, exploration and development
risks, title matters, inability to obtain any required third party consents, operating risks and hazards,
metal prices, political and economic factors, competitive factors, general economic conditions,
relationships with strategic partners, governmental regulation and supervision, seasonality,
technological change, industry practices and one-time events. In making the forward-looking
statements, the Company has applied several material assumptions including, but not limited to, the
assumptions that: (1) the proposed exploration, development and exploitation of mineral projects will
proceed as planned; (2) market fundamentals will result in sustained metals and minerals prices and
(3) any additional financing needed will be available on reasonable terms. The Company expressly
disclaims any intention or obligation to update or revise any forward-looking statements whether as
a result of new information, future events or otherwise except as otherwise required by applicable
securities legislation.
The Company cautions that it has not completed any feasibility studies on any of its mineral
properties, and no mineral reserve estimate or mineral resource estimate has been established.
Geophysical exploration targets are preliminary in nature and not conclusive evidence of the
likelihood of a mineral deposit.
The TSX Venture Exchange has neither approved nor disapproved the contents of this news release.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
SOURCE
Meridian Mining S.E.
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/March2021/29/c7542.html
%SEDAR: 00040264E
For further information:
Dr. Adrian McArthur, CEO, President and Director, Meridian Mining UK S,
Email: [email protected], Ph: +1 (778) 715-6410 (PST)
CO: Meridian Mining S.E.
CNW 08:30e 29-MAR-21