Meridian Commences Cabaçal’S PFS & Advances Santa Helena Resource Delineation IN Expansion of the Cabaçal Belt’S Hub and Spoke Strategy
8th Floor, 4 More London Riverside | London SE1 2AU| United Kingdom
MERIDIAN COMMENCES CABAÇAL’S PFS & ADVANCES SANTA HELENA RESOURCE DELINEATION
IN EXPANSION OF THE CABAÇAL BELT’S HUB AND SPOKE STRATEGY
Santa Helena returns 11.0m @ 5.2g/t AuEq & 6.8m @ 3.3g/t AuEq in newly
discovered layer of Au-Cu-Ag and Zn VMS mineralization.
LONDON, United Kingdom, January 10, 2024 / Accesswire / Meridian Mining UK S (TSX: MNO) (OTCQX:
MRRDF) (Frankfurt/Tradegate: 2MM) (“Meridian” or the “Company”) is pleased to report its strategy to
further advance multiple prospects within the Cabaçal VMS Belt as part of a “Hub and Spoke” strategy to
maximise value for shareholders. The Cabaçal Project’s (“Cabaçal”) current engineering and drill programs
will be upgraded to complete a Pre-Feasibility Study (“PFS”) on an expanded production case, to delineate
higher certainty of the core asset value.
Due to t he continued success of drilling at the Santa Helena mine (“Santa Helena”) , the Company has
decided to advance the historical mine towards a resource estimate to maximise its optionality within the
broader VMS belt. Santa Helena has the potential to be the first step towards the Hub and Spoke strategy
envisaged for the development of the wider Cabaçal Belt’s growth potential.
The Company further announces that it has discovered a rich layer of Au-Cu-Ag and Zn VMS mineralization
projecting below the main VMS mine horizon at Santa Helena, grading 11.0m @ 5.2g/t AuEq (CD-360)
and 6.8m @ 3.3g/t AuEq (CD-416). Further extensions of the VMS mine horizon have been intersected in
CD-420, and CD-431, up to 510m to the east of the historical resource envelope (“Figure 1”). Further assay
results from Cabaçal and Santa Helena are pending.
HIGHLIGHTS REPORTED TODAY
• Cabaçal’s work programs upgraded to produce a Pre-Feasibility Study in 2024 leading to higher project
certainty;
• Santa Helena’s robust growth in resource potential to be advanced towards first resource in 2024;
• Santa Helena’s drilling intercepts new Au-Cu-Ag and Zn rich VMS lens located below mine sequence;
o CD-360: 11.0m @ 5.2g/t AuEq (0.9g/t Au, 2.2% Cu, 22.1g/t Ag & 3.5% Zn) from 30.0m;
o CD-416: 16.6m @ 2.1g/t AuEq (0.7g/t Au, 0.6% Cu, 14.7g/t Ag & 1.7% Zn) from 41.4m;
Including 6.8m @ 3.3g/t AuEq (1.3g/t Au, 1.1% Cu, 23.3g/t Ag & 1.9% Zn) from 41.4m;
• Santa Helena’s prospective VMS mine sequence extended by 0.51km to the east with multiple hits;
• Cabaçal Mine area continues to return robust results of Au-Cu & Ag mineralization;
o CD-365: 50.5m @ 1.0g/t AuEq (0.7g/t Au, 0.3% Cu & 1.1g/t Ag) from 19.8m; and
• Cabaçal Purchase Agreement amended to reflect changes in Project timeline deliverables.
Mr. Gilbert Clark, CEO, comments: “2024 has started with an expansion of our strategy of developing
satellite deposits “Spokes” in the Cabaçal belt to feed a central processing “Hub” at Cabaçal. By upgrading
Cabaçal’s current PEA 1 to a PFS standard and removing all Inferred Resources from future financial and
mining modelling, we will achieve a higher certainty on its hard asset value, with only a modest increase
in the data and studies required. In 2024, Santa Helena’s programs will be firmly advancing towards its
1 Meridian Mining news release dated March 6, 2023
inaugural resource, with a strong focus on maximising the potential for open -pitable resources, and
exposing it to the optionality of the hub and spoke strategy proposed for the Cabaçal VMS belt.
Today’s r esults from Santa Helena have outperformed our expectations with robust assays from infill
drilling, with a half a kilometre extension of the mine horizon eastwards beyond its historical resource
limits, and with the identification of a strong layer of Au-Cu-Ag and Zn mineralization that projects below
the mine horizon. This new horizon presents a tremendous opportunity, as historical drilling has generally
not been projected deep enough to effectively test this horizon. All combined, it illustrates both the near-
mine and along strike upside that remains.
The Cabaçal mine area continues to deliver robust zones of copper -gold & silver mineraliz ation from
shallow depths. We continue to see examples of gold only mineralization, separate to the copper-gold VMS
envelope, which reinforces the importance of evaluating the potential of the greater Cabaçal belt for large
gold-only deposits related to the later-stage gold event.
As Meridian sets out its well supported development plans for 2024 and beyond, the focus is to create
greater hard asset value as a near term developer and operator of one of the most prospective copper -
gold VMS belts in South America.”
CABAÇAL PRE-FEASIBILITY STUDY AND NEAR-TERM INCORPORATION OF THE SANTA HELENA DEPOSIT
The Company has reviewed the growing database of the Cabaçal deposit and the greater Cabaçal VMS
belt and has decided to expand the general project data programs to produce a PFS for the Cabaçal mine.
The PFS mine schedule and financial model will be focused on an initial throughput of 2.5Mt p.a. then
expanded to reach a maximum throughput of 4.5Mt using project cash flow in year four. The larger
throughput has been proposed and applied for via the Preliminary License application2. This positions the
Cabaçal mine as a central processing hub for the long -term development of the Cabaçal VMS belt.
Meridian has already engaged with Brazilian and International engineering groups on the PFS that will be
completed to a cost estimate classification of AACE 4. They will be reporting the ir estimations for the
completion of the PFS schedule shortly. To accommodate the collation of the general project data for the
PFS, the Company has agreed with the Cabaçal vendors to modify the Cabaçal Purchase Agreement’s 3
schedule so that the subsequent Feasibility Study is completed by September 30, 2025 with no additional
financial consideration required.
Given Santa Helena’s strong historical drill results, their ongoing confirmation , and the recent successes
in expanding the resource potential, the Company has been given a strong boost for creating potentially
the next open pitable resource, that will leverage off the optionality of the proposed Cabaçal belt’s
development strategy. The Company has reviewed Santa Helen a’s historical technical and operational
reports and held discussions with the previous mill operating personnel. From this , the planned
metallurgical studies for the Santa Helena mineralization have historical operational knowledge and
technical data inputs, to guide the testwork from the outset.
SANTA HELENA DRILL PROGRAM UPDATE
Santa Helena is a Cu-Au-Ag & Zn VMS deposit located ~9km to the southeast of the Cabaçal Mine. It has
over 10,000m of historical drilling and is the most advanced of a series of exploration targets along the
Cabaçal Mine Corridor. The Company commenced initial drilling in August 2023 4 as part of a verification
program, to validate the historical data in line with NI43 -101 requirements, and to initiate scout drilling
for resource extensions defined by geophysics and coincident geochemical anomalies . The Company's
compilation of historical drill data indicated that many past holes were not completely sampled, that
reconciliation of surveyed drilled positions and mine workings (and records), indicated that the high-grade
2 Meridian Mining news release dated December 5, 2023
3 Meridian Mining news releases dated August 26 & November 9, 2020
4 Meridian Mining news release dated August 8, 2023
massive sulphide mineralization was only partially mined. and that extensions of near- surface
mineralization to the east were also not integrated into the historical resource calculations. The Company
has concluded that this historical resource area is considered open, and based on new and historical data
defined an Exploration Target of 3.2 - 7.2 Mt @ 3.0 - 3.2g/t AuEq5. The Company has completed thirty
holes for 1730m to date. Initial results from holes drilled along the main trend for resource verification
and resource extension were very positive 6. The latest results (“Table 1”) have continued to define
mineralization up-dip and south of the historical resource limits, and in the eastern sector of the deposit
and its extensions into the projection of the associated geophysical and geochemical anomaly (“Figure
1”), yielding a number of significant results.
Figure 1: Santa Helena Drilling Results.
Drilling continued to test strike extensions east and west from the areas where Meridian had previously
had success in testing a gold in soil anomaly, over a position shown on historical BP mapping as a barren
post-mineralization gabbro. The extension of a geophysical chargeability anomaly over this area, coupled
with the soil anomaly , led Meridian to believe that mineralization extended into this area, beyond the
limits of the historical resource envelope. Meridian’s initial drilling has confirmed this position as an
upward projection of the VMS mineralized horizon (CD-336, CD-340, CD-349, CD-351, CD-359).
New results from this area have been returned from holes CD-360 and CD-416, collared ~60m and 100m
east-southeast of CD -359 (36.6m @ 1.3g/t AuEq from 13.0m). Although a gold in soil anomaly was not
evident in these newly collared positions, both holes intersected near-surface mineralization, masked by
5 Meridian Mining News Release of December 5, 2023
6 Meridian Mining news release dated October 23, November 14, and December 5, 2023
a shallow veneer of transported colluvial overburden. CD -360’s upper intersection of 16.4m @ 0.9g/t
AuEq from 6.0m commenced with a shallow gold zone (3 .0m @ 2.8g/t Au from 6.0m), in the projected
up-dip position from the historical resource envelope. CD -360 drilled through a band of gabbro and
intersected a second zone of high -grade mineralization, returning 11.0m @ 5.2g/t AuEq from 30.0m,
including: 2.4m @ 21.9g/t AuEq from 37.0m, with the richest sulphide band being ~ 50m south of, and at
the same elevation as the underground mining galleries. CD-416 intersected the predicted mineralization
up-dip from the historical resource, with an interval of 13.2m @ 2.1g/t AuEq from 11.0m. CD-416 was
then deepened below the barren gabbro sill and encountered a separate zone of 16.6m @ 2.1g/t AuEq
from 41.4m. Further drilling will be undertaken to trace this newly defined mineralized position along and
across strike.
Figure 2: Santa Helena’s second VMS lens projecting below historical resource.
CD-411 (22.5m @ 1.9g/t AuEq from 11.0m), a step-out hole, a further 50m west-northwest of previously
reported CD -351 (11.7m @ 2.0g/t AuEq from 27.0m), intercepted strong mineralization that remains
open.
Initial drilling has been undertaken in the eastern up -dip sector of Santa Helena outside of its historical
resource envelope. Initial results have included CD -402 (17.0 m @ 0.4 g/t AuEq from 3.0m ) and CD-403
(16.5 m @ 0.7g/t AuEq from 1.7m ). CD-407 was abandoned after intersecting the old workings and will
be redrilled in the future. CD-368, drilled closer to but outside the resource margin, intersected 23.5m @
0.9 g/t AuEq from 10.1m, including 5.5 m @ 2.2 g/t AuEq from 13.6m.
Promisingly, early drill tests stepping out significantly to the east of the Santa Helena show potential for
definition of additional resources. CD-420, drilled 250m east -southeast of the margin of the historical
resource, returned 26.9m @ 1.4g/t AuEq from surface. 260m further east-southeast again (510m from
the edge of the historical resource) hole CD-431 encountered a sulphide assemblage of sphalerite-pyrite-
chalcopyrite-galena from 42.7 -43.6m for which assays are pending. Defining the continuity of sulphide
mineralization in this position is very encouraging for the prospectivity of the geophysical chargeability
anomaly which extends over a 2km strike beyond the limits of the historical resource.
CABAÇAL DRILL PROGRAM UPDATE
Drilling in the Cabaçal mine area continues to deliver robust zones of copper-gold and silver mineralization
(“Figure 3”) from shallow depths (“Table 1”). We continue to see examples in the drilling of gold only
mineralization (CD-365: 6.2m @ 2.5g/t Au from 37.5m), separate to and outside of the copper envelope.
Figure 3: Cabaçal Mine drill results updated.
In cases, this gold only mineralization can be in chloritic alteration intervals with little sulphide content ,
which may have a subtle geophysical response. This reinforces the exploration potential for the Cabaçal
belt to host large gold only deposits related to the late -stage gold event, in addition to targets for gold -
base metal mineralization associated with the earlier VMS event.
The company has accumulated a critical mass of drill core to undertake a pilot plant metallurgical test ,
incorporating sample intervals from the main mine area and the CNWE as part of the program
transitioning to a PFS, which will also generate a Cu-Au-Ag concentrate sample for marketing purposes.
The focus of drilling in early 2024 will be directed towards the inferred to unclassified areas of the
resource, some of which have been difficult to access with conventional drilling due to topographic
constraints. Equipment has been sourced ahead of the shutdown period to facilitate the drilling of low -
angle holes to access these areas, which will be used on recommencement of the program from the last
week of January.
ABOUT MERIDIAN
Meridian Mining UK S is focused on:
• The development and exploration of the advanced stage Cabaçal VMS gold-copper project;
• Regional scale exploration of the Cabaçal VMS belt; and
• Exploration in the Jaurú & Araputanga Greenstone belts (the above all located in the State of
Mato Grosso, Brazil).
Cabaçal is a gold -copper-silver rich VMS deposit with the potential to be a standalone mine within the
50km VMS belt. Cabaçal’s base and precious metal- rich mineralization is hosted by volcanogenic type,
massive, semi-massive, stringer, and disseminated sulphides within deformed metavolcanic-sedimentary
rocks. A later-stage gold overprint event has emplaced high-grade gold mineralization.
The Preliminary Economic Assessment technical report (the “PEA Technical Report”) dated March 30,
2023, entitled: "Cabaçal Gold -Copper Project NI 43 -101 Technical Report and Preliminary Economic
Assessment, Mato Grosso, Brazil” outlines a base case after-tax NPV5 of USD 573 million and 58.4% IRR
from a pre -production capital cost of USD 180 million, leading to capital repayment in 10.6 months
(assuming metals price scenario of USD 1,650 per ounces of gold, USD 3.59 per pound of copper, and USD
21.35 per ounce of silver). Cabaçal has a low All-in-Sustaining-Cost of USD 671 per ounce gold equivalent
for the first five years, driven by high metallurgical recovery, a low life -of-mine strip ratio of 2.1:1, and
the low operating cost environment of Brazil (see press release dated March 6, 2023).
The Cabaçal Mineral Resource estimate consists of Indicated resources of 52.9 million tonnes at 0.6g/t
gold, 0.3% copper and 1.4g/t silver and Inferred resources of 10.3 million tonnes at 0.7g/t gold, 0.2%
copper & 1.1g/t silver (at a 0.3 g/t gold equivale nt cut-off grade), including a higher-grade near-surface
zone supporting a starter pit.
Readers are encouraged to read the PEA Technical Report in its entirety. The PEA Technical Report may
be found on the Company's website at www.meridianmini ng.co and under the Company's profile on
SEDAR at.
The qualified persons for the PEA Technical Report are: Robert Raponi (P. Eng), Principal Metallurgist with
Ausenco Engineering), Scott Elfen (P. E.), Global Lead Geotechnical and Civil Services with Ausenco
Engineering), Simon Tear (PGeo, EurGeol), Principal Geological Consultant of H&SC, Marcelo Batelochi,
(MAusIMM, CP Geo), Geological Consultant of MB Geologia Ltda, Joseph Keane (Mineral Processing
Engineer; P.E), of SGS, and Guilherme Gomides Ferreira (Mine Engineer MAIG) of GE21 Consultoria
Mineral.
On behalf of the Board of Directors of Meridian Mining UK S
Mr. Gilbert Clark - CEO and Director
Meridian Mining UK S
Email: [email protected]
Ph: +1 778 715-6410 (PST)
Stay up to date by subscribing for news alerts here: https://meridianmining.co/contact/
Follow Meridian on Twitter: https://twitter.com/MeridianMining
Further information can be found at: www.meridianmining.co
Technical Notes
Samples have been analysed at SGS laboratory in Belo Horizonte. Samples are dried, crushed with 75%
passing <3 mm, split to give a mass of 250 -300g, pulverized with 95% passing 150#. Gold analyses are
conducted by FAA505 (fire assay of a 50g charge), and base metal analysis by methods ICP40B and
ICP40B_S (four acid digest with ICP -OES finish). Visible gold intervals are sampled by metallic screen fire
assay method MET150-FAASCR. Samples are held in the Company’s secure facilities until dispatched and
delivered by staff and commercial couriers to the laboratory. Pulps and coarse rejects are retained and
returned to the Company for storage. The Company submits a range of quality control samples, including
blanks and gold and polymetallic standards supplied by Rocklabs, ITAK and OREAS, supplementing
laboratory quality control procedures. Approximately 5% of archived samples are sent for umpire
laboratory analysis, including any lots exhibiting QAQC outliers after discussion with the laboratory. In BP
Minerals sampling, gold was analysed historically by fire assay and base metals by three acid digest and
ICP finish at the Nomos laboratory in Rio de Janeiro. Silver was analysed by aqua regia digest with an
atomic absorption finish. True width is considered to be 80 -90% of intersection width. Assay figures and
intervals are rounded to 1 decimal place. Gold equivalents for Cabaçal are calculated as: AuEq(g/t) =
(Au(g/t) * %Recovery) + (1.492*(Cu% * %Recovery)) + (0.013*(Ag(g/t) * %Recovery)), where:
• Au_recovery_ppm = 5.4368ln(Au_Grade_ppm)+88.856
• Cu_recovery_pct = 2.0006ln(Cu_Grade_pct)+94.686
• Ag_recovery_ppm = 13.342ln(Ag_Grade_ppm)+71.037
Recoveries based on 2022 metallurgical testwork on core submitted to SGS Lakefield
Gold equivalents for Santa Helena are based on metallurgical recoveries from the historical resource
calculation, updated with pricing forecasts aligned with the Cabaçal PEA. A uEq (g/t) = ( Au_(g/t) *
65%Recovery) + (1.492*Cu(%) * 89 %Recovery) + (0. 474*Zn% * 89%Recovery)) + (0. 013Ag(g/t) *
61%Recovery)).
The Gradient Array IP survey was conducted using the Company's in-house team, utilizing its GDD GRx8 -
16c receiver and 5000W -2400-15A transmitter. Data is processed by the Company’s independent
consultancy Core Geophysics. Geophysical and geochemical exploration targets are preliminary in nature
and not conclusive evidence of the likelihood of a mineral deposit.
Qualified Person
Mr. Erich Marques, B.Sc., MAIG, Chief Geologist of Meridian Mining and a Qualified Person as defined by
National Instrument 43-101, has reviewed, and verified the technical information in this news release.
FORWARD-LOOKING STATEMENTS
Some statements in this news release contain forward-looking information or forward-looking statements
for the purposes of applicable securities laws. These statements address future events and conditions and
so involve inherent risks and uncertainties, as disclosed under the heading "Risk Factors" in Meridian's
most recent Annual Information Form filed on www.sedar.com. While these factors and assumptions are
considered reasonable by Meridian, in light of management’s experience and perception of current
conditions and expected developments, Meridian can give no assurance that such expectations will prove
to be correct. Any forward-looking statement speaks only as of the date on which it is made and, except
as may be required by applicable securities laws, Meridian disclaims any intent or obligation to update
any forward -looking statement, whether as a result of new information, future events, or results or
otherwise.
Table 1: Results Reported
Santa Helena drill results
Hole-ID Dip Azi EOH
(m)
Zone Int
(m)
AuEq
(g/t)
CuEq
(%)
Au
(g/t)
Cu
(%)
Ag
(g/t)
Zn
(%)
Pb
(%)
From
(m)
CD-420 -59 214 60.4 SHM
26.9 1.4 0.9 0.6 0.4 16.2 0.8 0.9 0.0
CD-416 -46 188 87.2 SHM
13.2 2.1 1.4 1.1 0.7 9.0 0.8 0.3 11.0
Including 4.7 2.7 1.8 1.5 1.2 12.9 0.2 0.1 17.4
16.6 2.1 1.4 0.7 0.6 14.7 1.7 0.4 41.4
Including 6.8 3.3 2.2 1.3 1.1 23.3 1.9 0.5 41.4
CD411 -46 187 67.0 CD411
22.5 1.9 1.3 1.0 0.6 10.0 1.0 0.7 11.0
Including 6.9 3.7 2.5 2.6 1.1 17.7 1.0 1.7 11.0
CD-407 -60 034 14.9 SHM Abandoned
CD-403 -65 035 40.7 SHM
16.5 0.7 0.5 0.5 0.1 5.9 0.7 0.2 1.7
Including 3.2 2.0 1.3 1.9 0.1 12.4 1.3 0.1 6.0
CD-402 -90 000 35.0 SHM
17.0 0.4 0.2 0.1 0.1 5.8 0.5 0.2 3.0
CD-391 -61 214 46.9 SHM
12.5 0.9 0.6 0.2 0.3 10.5 0.8 0.2 5.0
Including 2.5 2.8 1.8 0.7 0.9 28.2 2.1 0.7 13.3
4.9 0.9 0.6 0.1 0.1 8.5 1.7 0.7 25.9
CD-390 -50 057 75.3 SHM
13.7 2.3 1.5 0.8 0.6 18.3 1.9 0.3 28.2
Including 3.3 8.1 5.4 2.3 2.5 69.6 6.5 0.8 38.6
7.5 0.3 0.2 0.1 0.0 4.1 0.5 0.2 46.5
CD-383 -60 034 65.9 SHM
5.1 0.4 0.2 0.1 0.0 1.5 0.6 0.1 30.4
12.5 0.6 0.4 0.1 0.0 4.7 1.0 0.3 43.0
CD-368 -61 214 51.0 SHM
23.5 0.9 0.6 0.4 0.3 8.5 0.5 0.3 10.1
Including 5.5 2.2 1.5 0.9 1.0 13.6 0.5 0.4 13.6
CD-360 45 187 50.0 SHM
16.4 0.9 0.6 0.6 0.3 3.6 0.4 0.3 6.0
Including 3.0 2.8 1.9 2.8 0.5 13.7 0.4 1.7 6.0
11.0 5.2 3.5 0.9 2.2 22.1 3.5 0.6 30.0
Including 2.4 21.9 14.7 3.9 9.5 89.7 14.5 2.6 37.0