Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

MNO.TO ·

Meridian Begins Drilling at Coice de Cobra Gold Target in Brazil

Exploration Programs

LEGAL_1:45192197.2

Meridian Begins Drilling at Coice de Cobra Gold Target in Brazil

Amsterdam, The Netherlands – August 1, 2017 – Meridian Mining SE (TSX-V: MNO) ("Meridian " or the

"Company") today announced that the Company is initiating its Coice de Cobra drilling campaign at the

Espigão do Oeste project, in Rondônia Brazil. Support crew have mobilized for immediate commencement

of the first hole in the Cascavel target area.

“The commencement of the first ever drill campaign is the next step in fast-tracking exploration of this

newly identified gold system ,” said Anthony Julien, President and CEO of Meridian. “ Our trenching

program has shown that multiple structures are present beneath the shallow soil cover, reaching widths

of 3 – 4m. The combined drilling and trenching campaign will allow us to unlock the excellent exploration

potential of the area.”

Meridian first identified gold anomalies at its wholly-owned Espigão do Oeste project during stream

geochemical surveys in 2016 (see news release dated July 19, 2016 ). The Coice de Cobra area was

prioritised for evaluation based on a higher concentration of positive gold counts (Figure 1). The Company

announced that it had initiated bedrock evaluation with a trenching program on June 14, 2017. The drill

rig is now on site and is commencing its first drill holes at the Cascavel Target area, testing depth

extensions to peak trench intervals of 3.8m @ 3.88g/t Au, including 1.8m @ 5.70g/t Au (true width; Figure

2; Figure3).

LEGAL_1:45192197.2

Figure 1: Stream anomalies with drainage coloured by gold counts, with digital elevation model in the background.

Boxed area prioritised for infill soil and mapping illustrated in more detail in Figure 2.

Ongoing reconnaissance trenching is currently focussed on the Caninana and Jibóia target corridor areas.

Bedrock exposure is limited and the program is evaluating the bedrock source to soil anomalies, which

have peak values of 714ppb Au. Anomalies extend over strike lengths of 400 – 1000m and are associated

with scattered anomalous rock chips, which have returned peak values of 9.8 g/t Au.

Figure 2: Overview of Coice de Cobra geochemical anomalies on digital elevation model showing current

reconnaissance trench sites in blue.

LEGAL_1:45192197.2

Figure 3: Coice de Cobra geochemical anomalies on digital elevation model showing current reconnaissance trench

sites in blue.

Structural evaluation and trenching is ongoing. Assays remain pending for trenches in the Caninana and

Jibóia areas, where some strong silica-flooded alteration zones are present.

The focus of initial drilling will be to test targets over the top 10 – 50m, and progressively establish the

depth of the oxide zone, the plunge of thickened vein zones, and the cross -strike footprint of the

mineralised vein systems. Deeper targets will be developed as plunge controls on higher grade zones are

established.

NOTES

Positive visual identifications of gold in field pan -concentrates are cross-checked by mineralogical reports

at SGS Laboratories in Belo Horizonte. The “gold counts” referenced in the release is a measure of the

number of gold grains in a pan concentrate o f a set volume of material. For drainage sampling, this

represents a 20 liter bucket of alluvium from the lower level of a stream channel. The technique is an

indicator of minerals of exploration interest in the source area and are not referenced to grade. Soil samples

are collected by pitting or hand-auger from “B-Horizon”. Samples are sieved to 80# and pulverised to 150#.

Gold in soil samples is analysed by Fire Assay of a 50g charge (method FAA505). Gold in rock samples is

analysed by SGS method FAA323 (fire assay of 30g charge), with samples containing visible gold analysed

by screen fire assay (SGS method FAASCR). Analytical quality is monitored by certified references and

blanks. Until dispatch, samples are stored in the company’s supervised stockpile yard or exploration office.

The samples are couriered to the assay laboratory using a commercial contractor (Eucatur). Pulps and

rejects are returned to the Company. The company conducts periodic umpire testwork to review results.

Qualified person

The technical information about the Company's exploration activity has been prepared under the

supervision of and verified by Dr. Adrian McArthur (B.Sc. Hons, PhD. FAusIMM), the Chief Geologist of

Meridian Mining, who is a "qualified person" within the meaning of National Instrument 43-101.

On behalf of the Board of Directors of Meridian Mining SE,

“Anthony Julien”

Anthony Julien

President, CEO and Director

For more information please contact visit the Company’s website at www.meridianmining.co or contact:

Fiona Grant Leydier

416-848-9851

[email protected]

ABOUT MERIDIAN

Meridian Mining SE is focused on the acquisition, exploration, development and mining activities in Brazil.

The Company is currently focused on exploring and developing the Espigão manganese project, the Bom

Futuro tin JV area, and adjacent areas in the state of Rondônia. The Company employs a two -pronged

strategy with the objective of growing pilot production while advancing a parallel multi -commodity

LEGAL_1:45192197.2

regional exploration program. Meridian is currently producing high grade manganese at its project located

at Espigão do Oeste.

Further information can be found at www.meridianmining.co.

FORWARD-LOOKING STATEMENTS

Some statements in this news release contain forward-looking information or forward-looking statements

for the purposes of applicable securities laws. These statements include, among others, statements with

respect to the Company’s plans for exploration and development of its properties and potential

mineralization. These statements address future events and conditions and, as such, involve known and

unknown risks, uncertainties and other factors, which may cause the actual results, performance or

achievements to be materially different from any future results, performance or achievements expressed

or implied by the statements. Such risk factors include, among others, failure to obtain regulatory

approvals, failure to complete anticipated transactions, the timing and success of future exploration and

development activities, exploration and development risks, title matters, inability to obtain any required

third party consents, operating hazards, metal prices, political and economic factors, competitive factors,

general economic conditions, relationships with strategic partners, governmental regulation and

supervision, seasonality, technological change, ind ustry practices and one -time events. In making the

forward-looking statements, the Company has applied several material assumptions including, but not

limited to, the assumptions that: (1) the proposed exploration and development of mineral projects will

proceed as planned; (2) market fundamentals will result in sustained metals and minerals prices and (3)

any additional financing needed will be available on reasonable terms. The Company expressly disclaims

any intention or obligation to update or revise any forward-looking statements whether as a result of new

information, future events or otherwise except as otherwise required by applicable securities legislation.

The Company cautions that it has not completed any feasibility studies on any of its mineral properties,

and no mineral reserve estimate has been established. In particular, because the Company’s production

decision relating to BMC’s manganese project is n ot based upon a feasibility study of mineral reserves,

the economic and technical viability of the Espigão manganese project has not been established.

The TSX Venture Exc hange has neither approved nor disapproved the contents of this news release.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies

of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.