MNO.TO · 2023-05-09 12:00:00

Meridian’s drilling exceeds expectations and adds more metal into Cabaçal open‐pit Infill program changing in‐pit waste zones to strong copper‐gold mineralization

Exploration Programs

6th Floor, 65 Gresham Street | London EC2V 7NQ | United Kingdom

Meridian’s drilling exceeds expectations and adds more metal into Cabaçal

open‐pit

Infill program changing in‐pit waste zones to strong copper‐gold mineralization

LONDON, United Kingdom, May 9, 2023 / Accesswire / Meridian Min ing UK. S (TSX: MNO),

(Frankfurt/Tradegate: 2MM) (OTCQB: MRRDF) (“Meridian” or the “C ompany”) is pleased to provide an

update on the continuing successes of the ongoing drill program at Cabaçal (“Figure 1”). Drill results have

confirmed that the near‐surface VMS mineralization within Cabaç al’s open pit, largely un‐assayed by the

historical drill program, hosts extensive copper‐gold mineralization, and that the higher‐grade copper‐

gold trends within the Cabaçal resource 1 remain open. Additionally, drilling of the up‐dip extensions o f

the Cabaçal Northwest Extension (“CNWE”), external to the resource model but within the open‐pit,

where it is currently classified as waste, have returned the highest grade copper VMS mineralization

within the CNWE. The ongoing drill program will shortly be expanded to three rigs. Assay results are

pending.

HIGHLIGHTS REPORTED TODAY

 First angled drill program across Cabaçal mine results in an increase in local metal content;

o Angled drill test line averages 31% superior metal content to BP’s vertical drilling;

o Highest grade gold zone defined 4.0m @ 9.6g/t AuEq (CD‐228) from 56.0m;

 Gold over‐print intersected within old workings, with scope for more upside;

o Future infill angled drill program across Cabaçal mine to be gr eatly expanded;

 Meridian unlocks the near surface copper‐gold mineralization at Cabaçal;

o 61.3m @ 1.2g/t AuEq2 (CD‐228) from 10.8m; including

 15.6m @ 3.0g/t AuEq from 51.5m;

o 56.7m @ 0.9g/t AuEq (CD‐230) from 15.1m; including

 18.5m @ 2.0g/t AuEq from 44.7m

o Shallow zones cutting historically unsampled areas confirmed as mineralized;

 CNWE infill program changes open‐pit’s waste zones into strong copper‐gold upside;

o 15.1m @ 1.5% Cu, 0.4g/t Au and 1.8g/t Ag (CD‐248) from 44.7m;

o Latest up‐dip copper‐gold extensions are external to Cabaçal’s resource model;

o Results point to likely reduction in the mining strip ratio;

 Geophysics on Southern Copper Zone firming up next phase of dri lling around CD‐2403; and

 Resource upgrade on track for late 2023.

1 See Meridian News Release of September 26, 2022

2 See Technical notes for AuEq inputs

3 See Meridian News Release of March 27, 2023

True width is considered to be 90-97% of intersection width

Dr. Adrian McArthur, CEO, comments: “The strong near surface results reported today highlight the

additional value being created by the continuing program. Cabaç al’s PEA 4 generated outstanding

economics driven by the financial model’s “front end” mining of the shallow starter pit in the CNWE . As

we are now demonstrating, there are more and more areas of shal low mineralization not included in the

current mine plan and/or resource model. These have the possibi lity of extending that critical front end

high‐grade mill feed. Equally important are the first results of the infill program through the old mine area.

Results from this first fence of angled drill holes have averag ed 31% higher metal content than those of

the historical drilling, due again to the under‐representation of the gold overprint. When we combine this

with the impressive result of CD‐240’s 34.5m @ 4.0% Cu, 1.7g/t Au & 22.4g/t Ag, it gives a very positive

upside potential to the Cabaçal PEA's already strong economic returns. Having a strong balance sheet and

three rigs turning shortly, we look forward to more drill results, exploration results from the mine corridor

and the resource upgrade later in the year.”

Figure 1: Location of results reported in this news release.

4 See Meridian News Release of March 6, 2023

In‐Pit Angled Drilling Program Adding Metal Content

As the Cabaçal host geology is dipping at ~15 o to the southwest, both angled and vertical drill holes have

comparable widths of mineralization (~96% of stratigraphic true width). The Company objective was to

evaluate on average how the two different drill orientations perform as it does not expect that individual

angled holes will always be universally better than vertical holes.

CD‐228 overlapped historical holes JUSPD‐358, JUSPD‐383, JUSPD‐368, JUSPD‐386, JUSPD‐388 and JUSPD‐

354. Taking the intersection‐times‐grade in AuEq as a measure of metal content, CD‐228 returned a

cumulative 81.0 gram‐meters AuEq, compared to an average of 57. 2 gram‐meters AuEq in the historical

holes overlapped (ranging from 28.8 to 84.0 gram‐meters AuEq); a 41% superior metal content. CD‐228

also returned the highest‐grade gold interval of this fence of 62.5g/t Au (sample CBDS31263, 58.4‐ 58.7m),

compared to the next highest in JUSPD‐358 (48.0g/t Au, sample CAIF04773, 37.4‐ 37.9m).

CD‐230 overlapped the historical holes: JUSPD‐388, JUSPD‐354, J USPD‐351 and JUSPD‐279. CD‐230

returned a superior 53.4 gram‐meters AuEq, compared to the JUSPD’s series lower average of 31.6 gram‐

meters AuEq (ranging from 25.2 to 41.9 gram‐meters AuEq). Despi te CD‐230 intersecting a mining void

that was assigned zero grade, it hosted superior metal contents.

Together, the average gram‐meter content of 67.2 in CD‐228 and CD‐230, compared to an average of 51.3

in the vertical holes cutting the same area, being 31% higher in cumulative metal content.

Up‐dip holes CD‐232 (35.5 gram‐m eters AuEq) and CD‐234 (39.8 gr am‐meters AuEq) continue to extend

the mineralized trend positively up‐dip through the decline are a, compared to the next closest vertical

hole up‐dip on this section (JUSPD‐110 ‐ 16.6 gram‐meters AuEq).

The Company is of the view that significant potential remains for additional gold mineralization hosted by

the high‐grade gold overprint within the Cabaçal resource area. The quantum of this upside will be directly

tested by the increased density of angle drilling from the infill program.

Figure 2: Examples of Meridian angled drilling compared to BP v ertical drilling, labelled and coloured by

AuEq compared to the block model. Middle diagram shows the high‐grade structural gold in CD‐228 (4.0m

@ 9.6g/t AuEq).

THE IMPORTANCE OF ADVANCING THE ANGLED DRILLING WITHIN MINE AREAS

Cabaçal is two deposits in one, the bulk tonnage gently dipping copper‐gold‐silver VMS deposit that has

been “overprinted” by a later event of sub‐vertical high‐grade gold structures. The 1980’s “vertical”

resource drilling by BP Minerals (~70% of the current Cabaçal resource database) targeted what they

thought was a shallow dipping system, and under‐represents the gold related to the steeper high‐grade

overprint event. Since 2021, Merid ian’s CNWE drill program has confirmed via its angled drilling that it

has a significantly higher probability of hitting the high‐grad e gold overprint while still intercepting the

VMS system.

The Company recently completed a four hole test line through th e mine area where the highest density

of historical vertical drilling is located (“the Test”; “Figure 1”, “Figure 2”). Two key findings have arisen.

Firstly, preliminary results indicate that despite the higher density of vertical drilling the Test program still

generated on average a higher metal content per metre of drilling. Secondly, the Test’s results within the

near surface zone, the area largely not assayed in the 1980’s, is mineralized and is considered open and

prospective along the length of the resource model.

These positive findings support the Company’s belief that further drilling both within and beyond the

resource envelop has potential to increase the Cabaçal deposit’s metal budget. Continued results such as

these have the potential to add value to both the early and lat er stages of the mine schedule outlined in

the recent PEA.

The Test line was collared over the Central Copper Zone. Four a ngled holes were drilled, from southwest

to the northeast: CD‐228, CD‐230, CD‐232 and CD‐234. CD‐232 and CD‐234 terminated outside the area

of the underground galleries in a more sparsely drilled position, in the area of the decline. Results

included:

CD‐228: 61.3m @ 1.2g/t AuEq (0.9g/t Au, 0.2% Cu & 0.9g/t Ag) from 10.8m;

Including:

 11.2m @ 0.8g/t AuEq (0.5% Cu & 1.3g/t Ag) from 10.8m (shallow zone);

 15.6m @ 3.0 AuEq (2.5g/t Au, 0.3% Cu & 1.4g/t Ag) from 51.5m;

6.1m @ 1.1g/t AuEq (0.2g/t Au, 0.6% Cu & 2.1g/t Ag) from 78.0m;

CD‐230: 56.7m @ 0.9g/t AuEq (0.3g/t Au, 0.5% Cu & 2.3g/t Ag) from 15.1m;

Including:

 18.5m @ 2.0g/t AuEq (0.7g/t Au, 0.9% Cu & 5.1g/t Ag) from 44.7m;

CD‐232: 10.2m @ 1.4g/t AuEq (0.4g/t Au, 0.7% Cu & 4.2g/t Ag) from 53.0m;

14.0m @ 1.3g/t AuEq (0.6g/t Au, 0.5% Cu & 2.7g/t Ag) from 69.0m;

CD‐234: 25.3m @ 1.1g/t AuEq (0.4g/t Au, 0.5% Cu & 2.8g/t Ag) from 37.0m; and

7.9m @ 1.0g/t AuEq (0.3g/t Au, 0.5% Cu & 3.3g/t Ag) from 67.0m.

CABAÇAL NORTHWEST EXTENSION’S WASTE ZONES CONVERTED TO MINERALIZATION

The infill program has been targeting the areas in the CNWE, largely where the resource remains inferred

or unclassified (waste). The drilling efforts have been primarily concentrated on exploring the up‐dip

extension of the mine sequence, covering a distance of 1000 meters along the strike. The results are

important as Cabaçal moves towards the next phase of resource u pgrade, ensuring areas that are

currently classified as waste, negatively influencing Cabaçal’s PEA, have their true mineral content

confirmed. CD‐248’s and CD‐225’s results highlight how the up‐d ip extensions within the CNWE, largely

classified as waste through lack of drill coverage, are returni ng robust grades and widths of copper‐gold

mineralization (“Figure 3”). In particular, CD‐248 returned the highest Cu VMS sample to date with 10.6%

Cu. This confirms that copper rich zones extend out beyond the old workings.. The Company believes

these results will contribute positively to future advanced mining and economic studies. Results included:

CD‐248: 15.1m @ 2.5g/t AuEq (0.4g/t Au, 1.5% Cu, 1.8g/t Ag) from 44.7m; and

CD‐225: 12.7m@ 1.2g/t AuEq (0.4g/t Au, 0.6% Cu & 1.1g/t Ag) from 27.0m.

Results continue to build from the earlier intersection of CD‐1 93 (15.6m @ 1.6g/t AuEq (0.8% Cu, 0.4g/t

Au, 1.3g/t Ag) from 42m.

Figure 3: Cross section showing newly drilled mineralization in unclassified areas, treated as waste in the

PEA.

SOUTHERN COPPER ZONE FOLLOW UP

Following the strong results reported in CD‐240, the Company ha s been undertaking geophysical follow‐

up programs to define potential extensions to the zone, with a Mise‐a‐la‐Masse survey (“the Survey”)

defining a conductor modelled over at least a 100m strike lengt h and strengthening to the south‐east of

the CD‐240 position. The Survey t echnique applied an electric c urrent directly to the mineral body via a

cable inserted down the hole, and the resultant anomaly is defined by an array of sensors on the surface.

The signal of the response diminishes naturally with distance f rom the drill hole, and the Company has

established survey platforms to the southeast and northwest of the CD‐240 position to guide further

drilling.

Table 1: Results reported today

Hole ID Dip Azi EOH

(m) Prospect Intercept

(m)

AuEq

g/t

CuEq

g/t

From

(m)

CD‐248 ‐49 59 80.9 CNWE

7.8 0.4 0.3 0.1 0.3 0.2 0.0 31.2

15.1 2.5 1.7 0.4 1.5 1.8 0.0 44.7

CD‐246 ‐49 060 65.0 CNWE

35.2 0.4 0.3 0.1 0.2 0.6 0.0 12.0

CD‐245 ‐49 061 33.7 CNWE

8.2 0.3 0.2 0.1 0.1 3.5 0.1 10.4

CD‐243 ‐49 059 49.1 CNWE

11.1 0.3 0.2 0.2 0.1 0.5 0.1 8.0

CD‐241 ‐59 310 170.3 SCZ

13.2 0.6 0.4 0.2 0.3 1.0 0.0 98.4

2.2 0.3 0.2 0.2 0.1 0.9 0.0 114.4

CD‐238 ‐49 061 70.3 CNWE

15.5 0.6 0.4 0.2 0.3 0.7 0.0 19.0

CD‐236 ‐49 060 24.0 CNWE

7.4 0.3 0.2 0.1 0.2 0.6 0.0 4.0

CD‐235 ‐60 060 36.7 CNWE

6.4 0.6 0.4 0.6 0.0 0.2 0.0 3.0

10.3 0.4 0.3 0.1 0.2 0.5 0.1 16.3

CD‐234 ‐60 045 90.2 ECZ

Extension

9.4 0.3 0.2 0.0 0.2 0.2 0.0 20.6

25.3 1.1 0.8 0.4 0.5 2.8 0.0 37.0

Including 10.1 2.2 1.5 0.7 1.0 6.2 0.1 52.2

7.9 1.0 0.7 0.3 0.5 3.3 0.0 67.0

CD‐233 ‐50 060 37.0 CNWE

5.1 0.4 0.3 0.4 0.0 0.1 0.0 3.6

10.7 0.5 0.3 0.1 0.3 1.0 0.1 13.3

Table 1 continued:

Hole ID Dip Azi EOH

(m) Prospect Intercept

(m)

AuEq

g/t

CuEq

g/t

From

(m)

CD‐232 ‐60 045 102.2 CCZ

4.3 0.4 0.3 0.1 0.2 0.3 0.0 34.4

2.0 0.6 0.4 0.6 0.0 0.0 0.0 45.0

10.2 1.4 0.9 0.4 0.7 4.2 0.0 53.0

14.0 1.3 0.9 0.6 0.5 2.7 0.0 69.0

CD‐231 ‐50 060 40.1 CNWE

6.5 0.7 0.5 0.4 0.2 0.8 0.1 20.2

CD‐230 ‐60 045 91.4 CCZ

56.7 0.9 0.6 0.3 0.5 2.3 0.0 15.1

Including 18.5 2.0 1.3 0.7 0.9 5.1 0.1 44.7

Including 7.3 3.7 2.4 0.9 1.9 11.9 0.1 60.4

CD‐229 ‐45 060 40.1 CNWE

13.5 0.3 0.2 0.2 0.1 0.5 0.0 5.0

CD‐228 ‐59 045 101.6 CCZ

61.3 1.2 0.8 0.9 0.2 0.9 0.1 10.8

Including 15.6 3.0 2.0 2.5 0.3 1.4 0.1 51.5

Including 4.0 9.6 6.4 8.4 0.9 3.5 0.2 56.0

6.1 1.1 0.7 0.2 0.6 2.1 0.0 78.0

CD‐227 ‐48 062 51.6 CNWE

6.9 0.6 0.4 0.3 0.3 1.0 0.1 17.1

CD‐226 ‐49 061 36.5 CNWE

14.4 0.5 0.3 0.1 0.3 0.5 0.0 17.7

CD‐225 ‐49 059 54.8 CNWE

6.5 0.6 0.4 0.6 0.0 0.1 0.0 6.0

12.7 1.2 0.8 0.4 0.6 1.1 0.0 27.0

CD‐224 ‐49 064 70.9 CNWE

14.0 0.3 0.2 0.1 0.1 0.2 0.0 19.0

8.7 0.9 0.6 0.8 0.1 0.2 0.0 34.6

Including 1.9 2.3 1.5 2.2 0.1 0.2 0.0 34.6

6.9 1.0 0.7 0.2 0.6 1.5 0.0 48.2

CD‐223 ‐49 060 76.1 CNWE

12.2 1.5 1.0 1.1 0.4 0.8 0.0 39.4

Including 1.7 5.2 3.5 5.3 0.0 0.2 0.0 39.4

And 2.2 3.7 2.5 1.4 1.7 3.6 0.0 49.0

CD‐222 ‐49 059 77.2 CNWE

15.8 0.6 0.4 0.4 0.2 0.6 0.0 34.0

Including 3.1 1.7 1.2 0.9 0.7 1.4 0.0 45.2

CD‐221 ‐45 060 79.0 CNWE

13.1 0.8 0.5 0.5 0.2 0.4 0.1 34.6

Including 2.0 2.9 1.9 2.5 0.4 0.7 0.0 36.0

CD‐220 ‐53 060 53.2 CNWE

13.0 0.5 0.3 0.4 0.1 0.5 0.0 19.4

← Back to feed