Azucar Hits 64.50 M of 1.10 G/T Au and 0.40% Cu at the Norte Target, Provides Drilling Update FOR El Cobre Project, Mexico
1
NEWS RELEASE
March 20 th , 2019
Trading Symbols:
TSX-V: AMZ; OTCQX: AXDDF
www.azucarminerals.com
AZUCAR HITS 64.50 M of 1.10 g/t Au and 0.40% Cu AT THE NORTE TARGET,
PROVIDES DRILLING UPDATE FOR EL COBRE PROJECT, MEXICO
VANCOUVER, B.C. Azucar Minerals Ltd. ("Azucar" or the "Company") (TSX-V: AMZ; OTCQX: AXDDF) is pleased to
announce results from its ongoing drilling program at the El Cobre porphyry copper-gold project in Veracruz State,
Mexico. Drilling results reported today come from hole EC-18-063 at the Norte Zone. This hole drilled across the
system above the late mineral intrusive body and was designed to test for deep high grade mineralisation on the
south margin of the porphyry complex.
While the hole was collared at -45 degrees it shallowed significantly to -28 degrees dip and therefore did not get to
the target area. Nevertheless, this hole tested new ground on the north side of the complex returning high grade
results in this area, including 44.50 metres averaging 1.34 g/t gold and 0.47% copper. A section and plan are
provided with this news release. Highlights include the following intervals:
Hole EC-18-063 NORTE TARGET, 145 Az, -45 dip
From 373.50 to 627.00, 253.50 metres @ 0.72 g/t gold and 0.30% copper
Including 424.00 to 488.50, 64.50 metres @ 1.10 g/t gold and 0.40% copper
And 424.00 to 468.50, 44.50 metres @ 1.34 g/t gold and 0.47% copper
And 433.50 to 446.50, 13.00 metres @ 2.04 g/t gold and 0.70% copper
From 638.35 to 653.00, 14.65 metres @ 0.73 g/t gold and 0.28% copper
From 678.75 to 731.85, 53.10 metres @ 1.00 g/t gold and 0.40% copper
Including 678.75 to 713.30, 34.55 metres @ 1.26 g/t gold and 0.47% copper
J. Duane Poliquin, Chairman of Azucar commented, “We are pushing on with our comprehensive two year intensive
drill program at the El Cobre project. The results so far have shown that the property hosts multiple porphyry centres
over a five kilometre strike. We look forward to reporting drill results as the program continues.”
About the El Cobre Project
The El Cobre Project has a total area of approximately 7,000 hectares and is located adjacent to the Gulf of Mexico,
about 75 kilometres northwest of the major port city of Veracruz, Mexico in an area of excellent infrastructure. The
project is situated 200 metres above sea level with extensive road access and is located less than 10 kilometres from
a power plant, highway, gas line and other major infrastructure. Major power lines cross the property area.
The four copper-gold porphyry targets currently known within the El Cobre Project, Encinal, El Porvenir, Norte and
Villa Rica are defined by distinct Cu-Au soil anomalies, discrete, positive magnetic features and a large IP
chargeability anomaly. The largest target area is the Villa Rica Zone which has only seen limited initial exploration
drilling. An overview of the targets’ results to date is provided below and a map is attached.
El Porvenir Zone: Drilling has demonstrated that the system persists at least to 400 m depth. Significant
copper and gold grades were intersected such as 0.16% Cu and 0.39 g/t Au over 290 m in hole DDH04CB1.
In addition, hole EC-13-004 intersected 0.23% Cu and 0.36 g/t Au over 106 m, to a depth of 504 m, again
2
indicating potentially significant mineralisation at depth. Results from minimal drilling in 2017 include hole
EC-17-040 which intersected 108.00 metres grading 0.88 g/t Au and 0.29% Cu, and hole EC-17-044 which
intersected 40.25 metres grading 0.50 g/t Au and 0.25% Cu.
Encinal Zone: Hole CB5 intersected a highly altered breccia pipe containing fragments of stockwork veining
and porphyry mineralisation across which 18.28 metres returned 1.42 g/t Au and 0.10% Cu. The breccia
pipe occurs in a large alteration zone, IP chargeability high and magnetics low which has not been tested to
depth. On June 19, 2017 Azucar announced that a new area of exposed stockwork quartz veining and gold
mineralisation had been identified in the Encinal Zone. On June 29, 2017 Azucar announced the results of
initial drilling on this exposed stockwork (Hole EC-17-025) which returned results including 34.47 metres
grading 0.73 g/t Au and 0.20% Cu.
Norte Zone: All five holes drilled in the Norte Zone prior to 2016 intersected porphyry-style mineralisation.
Hole 08-CBCN-022, one of the deepest holes drilled at Norte in 2008, returned values of 0.14% Cu with 0.19
g/t Au over 259 m and 08-CBCN-19 intersected 41.15 metres averaging 0.42 g/t gold and 0.27% copper to
the end of the hole at 187.45 metres. Drilling at the Norte Zone in 2016 and 2017 has resulted in the highest
grade intersections to date at the El Cobre project, including 114.60 metres grading 1.33 g/t Au and 0.48%
Cu (Hole EC-17-018, see press release of April 5, 2017), 80.50 metres grading 1.34 g/t Au and 0.46% Cu
(Hole EC-16-012, see press release of October 24, 2016), 70.45 metres grading 2.32 g/t Au and 0.59% Cu
(Hole EC-17-026, see press release of July 25, 2017), and 534.90 metres grading 0.90 g/t Au and 0.30% Cu
(Hole EC-17-029, see press release of August 15, 2017). Since the Norte Zone discovery, Azucar has been
carrying out a systematic drill campaign to define this target. Future Norte drilling will focus on step-out and
infill drilling, in addition to testing the system to depth.
Villa Rica Zone: The Villa Rica Zone is a roughly 2.5 kilometre by 1 kilometre area of hydrothermal alteration
defined also by a strong north-northwest trending magnetic-chargeability high and associated copper-gold
soil geochemical anomalies. Past mapping and sampling defined several areas of exposed porphyry
mineralisation within the Villa Rica target area including the Raya Tembrillo Zone and the Naranjo zone,
both at the north end of the Villa Rica zone. Initial drilling in 2017 on the Raya Tembrillo zone intersected
two styles of mineralisation; hypogene copper-gold porphyry mineralisation (115.00 metres of 0.57 g/t gold
and 0.27% copper, see press release of November 28, 2017) and near surface exotic enriched copper
mineralisation with an apparent tabular distribution (94.00 metres of 1.36% copper; see press release of
December 13, 2017).
More information on El Cobre is available on the Azucar website at http://www.azucarminerals.com .
Larry Segerstrom, M.Sc. (Geology), P.Geo., A Director of the Company, is a Qualified Person as defined by National
Instrument 43-101 ("NI 43-101") and has reviewed and approved the contents of this news release. The porphyry
mineralisation reported in this news release is associated with broad areas of alteration and stockwork veining. True
widths cannot be determined at this time. The analyses reported were carried out at ALS Chemex Laboratories of
North Vancouver using industry standard analytical techniques. For gold, samples are first analysed by fire assay and
atomic absorption spectroscopy (“AAS”). Samples that return values greater than 10 g/t gold using this technique are
then re-analysed by fire assay but with a gravimetric finish. For copper, samples are first analysed by Inductively
Coupled Plasma – Atomic Emission Spectroscopy (“ICP-AES”), with four acid digestion. Samples that return values
greater than 10000 g/t copper using this technique are then re-analysed by HF-HNO3-HCLO4 digestion with HCL
leach and ICP-AES finish. Blanks, field duplicates and certified standards were inserted into the sample stream as
part of Azucar’s quality assurance and control program which complies with National Instrument 43-101
requirements. A NI 43-101 compliant technical report on the El Cobre project entitled, "Technical Report on the El
Cobre Property” was filed in May 2015 and can be obtained from www.sedar.com.
3
About Azucar
Azucar is an exploration company with a mandate to thoroughly explore the El Cobre project in Veracruz, Mexico, an
~7,000 Ha property which covers multiple gold-rich porphyry targets, as demonstrated by recent drilling. Azucar is
permitted and funded for an active drill campaign in 2019. Azucar holds a 100% interest in the El Cobre project,
subject to net smelter returns (“NSR”) royalty interests, assuming production from the property exceeds 10,001
tonnes per day of ore, totaling 2.25% which can be reduced to 2.0% though the payment of US$3.0 million.
On behalf of the Board of Directors,
“Morgan Poliquin”
Morgan J. Poliquin, Ph.D., P.Eng.
President, CEO and Director
Azucar Minerals Ltd.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture
Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release includes forward-looking statements that are subject to risks and uncertainties. All statements within it, other than
statements of historical fact, are to be considered forward looking. Although the Company believes the expectations expressed in
such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance
and actual results or developments may differ materially from those in forward-looking statements. Factors that could cause actual
results to differ materially from those in forward-looking statements include market prices, exploitation and exploration successes,
continued availability of capital and financing, and general economic, market or business conditions. There can be no assurances
that such statements will prove accurate and, therefore, readers are advised to rely on their own evaluation of such uncertainties.
We do not assume any obligation to update any forward-looking statements, other than as required pursuant to applicable securities
laws.
Contact Information:
Azucar Minerals Ltd.
Tel. 604.689.7644
Email: [email protected]
http://www.azucarminerals.com/