Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

MKO.V ·

Mako Mining Intersects 42.91 G/T Au and 38.3 G/T AG over 4.1M (Estimated True Width) IN New Zone, 35.5M from Surface, 50M from Current Mining - over 530M Strike Length, Open Along Strike and Down Dip

Drill Results

LEGAL*56256690.1

595 Burrard Street, Suite 2833

Vancouver, BC V7X 1K8

Tel: (604) 646-1580

www.makominingcorp.com

TSX-V: MKO | OTCQX: MAKOF

Suite 700 - 838 West Hastings St.

Vancouver, BC - V6C 0A6

IR: (647) 203-8793

www.makominingcorp.com

TSX-V: MKO | OTCQX: MAKOF

June 21, 2022

TSX-V:MKO; OTCQX: MAKOF

MAKO MINING INTERSECTS 42.91 G/T AU AND 38.3 G/T AG OVER 4.1M (ESTIMATED

TRUE WIDTH) IN NEW ZONE, 35.5M FROM SURFACE, 50M FROM CURRENT MINING -

OVER 530M STRIKE LENGTH, OPEN ALONG STRIKE AND DOWN DIP

Mako Mining Corp. (TSX-V: MKO; OTCQX: MAKOF) (“Mako” or the “Company”) is pleased to

report additional high-grade drill results from an area beginning approximately 50m southwest of

the current open pit mining operations at the San Albino West Pit in northern Nicaragua.

Recent drilling has confirmed gold mineralization over an area of approximately 530m x 470m

(strike x dip) in an area that was identified in the 2020 Mineral Resource Estimate as the SW Pit.

At the time of the resource estimate, this area measured approximately 50m x 50m (see drill plan

below).

To date a total of 27,533 meters (m) in 202 drill holes (2011 -2022) has been completed in the

area. Most of the drilling intersected mineralization within, or immediately outside, the currently

permitted pit limits.

Highlights of selected intercepts of the high-grade gold mineralization include:

• 42.91 g/t Au and 38.3 g/t Ag over 4.50m (4.1m estimated true width-ETW) in hole SA22-615

• 21.21 g/t Au and 35.5 g/t Ag over 2.00m (1.4m ETW) in hole SA22-609

• 34.35 g/t Au and 24.9 g/t Ag over 2.80m (2.7m ETW) in hole SA22-546

• 20.06 g/t Au and 71.3 g/t Ag over 1.00 m (ETW) in hole SA21-545

The objective of the SW Pit drilling program is to delineate new mineral resources amenable to

open pit and underground mining methods in the sparsely tested Southwestern portion of the

permitted pit limit, as well as to test extensions of this mineralization beyond the permitted pit limit.

Previous drilling in this area defined both shallow and deeper mineral resources; however, the

continuity of these zones was not established at the time, and their contribution to the 2020

Mineral Resource Estimate was limited due to lack of continuity. Recent drilling has successfully

linked deeper mineralized zones to near surface zones and has confirmed the presence of gold

mineralization over an area of approximately 530m by strike and 470m by dip (see section & drill

plan below). Results for an additional 13 drill holes in the area are pending. This current program

is expected to demonstrate the continuity of these zones so that they can be included in an

updated mineral resource expected early next year.

LEGAL*56256690.1

A technical report for the current mineral resource estimate at San Albino is available under the

Company’s SEDAR profile at www.sedar.com and available on the Company’s website at

www.makominingcorp.com (see press release dated October 19, 2020).

Akiba Leisman, CEO of Mako states, “when we updated our mineral resource estimate in 2020,

we intentionally limited significant intercepts if we did not have complete confidence in the

geological continuity of a specific zone . The SW Pit was reduced to a de minimis size despite

expecting that these excluded areas would inevitably be included in subsequent mineral resource

updates with additional drilling. These high grade and shallow results have both established

geological continuity and extended areas of mineralization beyond anything that has been drilled

to date. Specifica lly, hole SA22 -615, which intersected 4 2.9 g/t gold over 4.1 m estimated true

width only 35.5m from surface, was drilled just outside our permitted pit, and directly underneath

our mining contractor’s workshop. Plans to move this workshop are currently underway to support

future mining activities in this area.”

Details of select intersects:

Drill hole SA22-615 intersected multiple mineralized intervals of near surface gold mineralization,

including 42.91 g/t Au and 38.3 g/t Ag over 4.50m (4.1m estimated true width- ETW), 35.5m below

surface. This drill hole is collared 22m outside the current permitted pit limit and is the furthest

mineralization recorded to the south in this area to date. In addition, this hole intersected two

mineralized intervals grading 1.44 g/t Au and 30.7 g/t Ag over 0.50m ( 0.5m ETW), 30.6m from

the surface and 15.68 g/t Au and 7.4 g/t Ag over 1.90m (1. 9m ETW), at 59.7m below surface ,

indicating potential to expand the open pit mineral resources.

SA22-609 intersected a mineralized interval of 21.21 g/t Au and 3 5.5 g/t Ag over 2. 00m (1.4m

ETW) 127.3m from surface. This hole was drilled to test the down dip extension (approx. 40m) of

the high-grade mineralization of 14.76 g/t Au and 25.1 g/t Ag over 2.00m encountered in drill hole

SA11-25 (see press release dated November 21, 2011).

Two drill holes, SA22-546 and SA21 -545, collared on the same drill pad, intersected multiple

mineralized zones (see ta ble below), including 34.35 g/t Au and 24.9 g/t Ag over 2.80m (2.7m

ETW) and 20.06 g/t Au and 71.3 g/t Ag over 1.00m (ETW), respectively. Both of these drill holes

confirmed down dip, high-grade mineralization intersected by drill holes SA21-536 and SA21-543

for an additional 38m. The previously reported results of the holes are 31.70 g/t Au and 39.2 g/t

Ag over 2.40m (1.5m ETW) and 13.51 g/t Au and 36.1 g/t Ag over 1.90m (1.8m ETW) respectively

(see press releases dated February 02, 2022, and March 09, 2022).

LEGAL*56256690.1

Table 1: Assay Results Reported in This Press Release

Drill hole From

(m)

To

(m)

Width

(m)

Au

(g/t)

Ag

(g/t) Interval ETW

(m)

SA21-538

80.40 81.20 0.80 35.60 28.2

11.79 g/t Au and 9.9 g/t Ag over 2.50m 2.2 81.20 82.00 0.80 0.11 0.7

82.00 82.90 0.90 1.01 1.9

SA21-544

74.50 75.10 0.60 1.14 0.5 4.28 g/t Au and 16.7 g/t Ag over 1.00 m 1.0 75.10 75.50 0.40 9.00 41.1

95.70 96.40 0.70 1.20 5.9 1.20 g/t Au and 5.9 g/t Ag over 0.70 m 0.8

144.50 145.00 0.50 33.90 9.6 33.90 g/t Au and 9.6 g/t Ag over 0.50 m 0.5

SA21-545

95.00 96.00 1.00 1.10 1.1 1.10 g/t Au and 1.1 g/t Ag over 1.00 m 1.0

100.80 101.20 0.40 17.00 43.5 20.06 g/t Au and 71.3 g/t Ag over 1.00 m 1.0 101.20 101.80 0.60 22.10 89.9

104.90 105.50 0.60 12.60 19.5 12.60 g/t Au and 19.5 g/t Ag over 0.60 m 0.6

129.40 130.00 0.60 4.09 7.3 2.48 g/t Au and 4.8 g/t Ag over 1.50 m 1.4 130.00 130.90 0.90 1.41 3.1

SA22-546

92.90 93.90 1.00 1.23 3.2 1.23 g/t Au and 3.2 g/t Ag over 1.00m 0.9

100.00 100.60 0.60 4.44 23.2 3.85 g/t Au and 36.5 g/t Ag over 1.00m 1.0 100.60 101.00 0.40 2.98 56.4

114.90 115.50 0.60 16.90 29.0 8.22 g/t Au and 23.2 g/t Ag over 1.50m 1.5 115.50 116.40 0.90 2.43 19.3

119.50 120.20 0.70 34.30 23.0

34.35 g/t Au and 24.9 g/t Ag over 2.80m 2.7 120.20 120.80 0.60 116.90 83.0

120.80 121.40 0.60 0.29 0.9

121.40 122.30 0.90 2.07 3.5

SA22-549 45.90 46.40 0.50 24.80 15.9 24.80 g/t Au and 15.9 g/t Ag over 0.50m 0.5

SA22-575 15.20 16.00 0.80 8.73 19.2 8.73 g/t Au and 19.2 g/t Ag over 0.80m 0.7

SA22-576

13.90 14.90 1.00 10.50 26.4

4.93 g/t Au and 19.3 g/t Ag over 2.50m 2.4 14.90 15.90 1.00 0.20 1.4

15.90 16.40 0.50 3.28 40.7

SA22-580

4.00 4.70 0.70 2.36 2.0

4.88 g/t Au and 5.8 g/t Ag over 3.20m 3.0 4.70 5.40 0.70 3.40 8.2

5.40 6.40 1.00 10.60 8.9

6.40 7.20 0.80 1.21 3.1

SA22-581 8.60 9.50 0.90 6.46 7.5 6.46 g/t Au and 7.5 g/t Ag over 0.90m 0.9

SA22-584 6.90 7.50 0.60 2.26 0.8 2.26 g/t Au and 0.8 g/t Ag over 0.60m 0.5

SA22-600 78.00 79.00 1.00 15.10 13.8 15.10 g/t Au and 13.8 g/t Ag over 1.00m 0.9

81.60 82.00 0.40 10.00 25.3 10.00 g/t Au and 25.3 g/t Ag over 0.40m 0.4

SA22-604 87.50 88.50 1.00 1.23 0.3 1.23 g/t Au and 0.3 g/t Ag over 1.00m 0.9

SA22-606 99.00 99.50 0.50 1.13 0.7 1.13 g/t Au and 0.7 g/t Ag over 0.50m 0.5

SA22-608 104.40 105.00 0.60 7.25 2.4 7.25 g/t Au and 2.4 g/t Ag over 0.60m 0.6

114.50 115.90 1.40 2.02 1.8 2.02 g/t Au and 1.8 g/t Ag over 1.40m 1.4

SA22-609 145.10 146.20 1.10 15.00 37.3 21.21 g/t Au and 35.5 g/t Ag over 2.00m 1.4 146.20 147.10 0.90 28.80 33.4

SA22-610 59.10 59.70 0.60 1.70 5.5 2.94 g/t Au and 5.4 g/t Ag over 1.30m 1.2 59.70 60.40 0.70 4.00 5.3

SA22-611

105.00 105.50 0.50 6.77 16.4

3.40 g/t Au and 7.6 g/t Ag over 1.90m 1.9 105.50 106.00 0.50 0.05 0.6

106.00 106.90 0.90 3.38 6.6

129.70 130.30 0.60 30.40 26.2 30.40 g/t Au and 26.2 g/t Ag over 0.60m 0.5

LEGAL*56256690.1

SA22-612 113.20 114.10 0.90 10.60 25.1 10.60 g/t Au and 25.1 g/t Ag over 0.90m 0.7

SA22-613 51.00 52.00 1.00 1.02 0.7 1.02 g/t Au and 0.7 g/t Ag over 1.00m 0.9

SA22-614 53.20 53.80 0.60 9.30 34.3 9.30 g/t Au and 34.3 g/t Ag over 0.60m 0.6

91.80 92.40 0.60 26.30 38.9 26.30 g/t Au and 38.9 g/t Ag over 0.60m 0.6

SA22-615

30.60 31.10 0.50 1.44 30.7 1.44 g/t Au and 30.7 g/t Ag over 0.50m 0.5

35.50 36.80 1.30 115.40 56.0

42.91 g/t Au and 38.3 g/t Ag over 4.50m 4.1

36.80 37.30 0.50 1.07 2.1

37.30 37.90 0.60 3.52 13.5

37.90 38.30 0.40 3.56 17.1

38.30 39.30 1.00 14.90 47.0

39.30 40.00 0.70 34.40 52.0

59.70 60.60 0.90 5.44 5.9 15.68 g/t Au and 7.4 g/t Ag over 1.90m 1.9 60.60 61.60 1.00 24.90 8.7

SA22-616

to SA22-

618

pending

SA22-619 67.30 68.00 0.70 25.40 27.9 17.05 g/t Au and 25.1 g/t Ag over 1.40m 1.4 68.00 68.70 0.70 8.70 22.3

SA22-620

to SA22-

623

pending

SA22-653 pending

SA22-654 20.00 20.50 0.50 1.55 16.5 1.55 g/t Au and 16.5 g/t Ag over 0.50m 0.5

SA22-655

to SA22-

658

pending

The mineralized intervals shown above utilize a 1.0 g/t gold cut-off grade with not more than 1.0m of internal

dilution. *Widths are reported as drill core lengths. **Estimated True Width is estimated from interpreted

sections. In addition to the drill holes presented in the table above, the following drill holes returned only

anomalous values: SA22 -548, SA22 -577 to SA22 -579, SA22 -582, SA22 -583, SA22 -585 to SA22 -587,

SA22-602, SA22-603, SA22-605 and SA22-607. A single drill hole returned no significant values: SA22 -

601. The database with a ll drilling results to date is available on the Company’s website at

www.makominingcorp.com

LEGAL*56256690.1

Figure 1. San Albino Mine Drilling Program

LEGAL*56256690.1

Figure 2. Schematic Cross Section

Sampling, Assaying, QA/QC and Data Verification

Drill core was continuously sampled from inception to termination of the entire drill hole. Sample

intervals were typically one meter. Drill core diameter was HQ (6.35 centimeters). Geologic and

geotechnical data was captured into a digital database, core was photographed, then one -half

split of the core was collected for analysis and one-half was retained in the core library. Drill core

samples were kept in a secured logging and storage facility until such time that they were

delivered to the Managua facil ities of Bureau Veritas and pulps were sent to the Bureau Veritas

laboratory in Vancouver for analysis. Gold was analyzed by standard fire assay fusion, 30gram

aliquot, AAS finish. Samples returning over 10.0 g/t gold are analyzed utilizing standard Fire

Assay-Gravimetric method. The Company follows industry standards in its QA&QC procedures.

Control samples consisting of duplicates, standards and blanks were inserted into the sample

stream at a ratio of 1 control sample per every 10 samples. Analytical results of control samples

confirmed reliability of the assay data.

LEGAL*56256690.1

Qualified Person

John M. Kowalchuk, P.Geo, a geologist and qualified person (as defined under NI 43 -101) has

read and approved the technical information contained in this press release. Mr . Kowalchuk is a

senior geologist and a consultant to the Company.

On behalf of the Board,

Akiba Leisman

CEO

About Mako

Mako Mining Corp. is a publicly listed gold mining, development and exploration company. The

Company operates the high -grade San Albino gold mine in Nueva Segovia, Nicaragua, which

ranks as one of the highest -grade open pit gold mines globally. Mako’s primary objective is to

operate San Albino profitably and fund exploration of prospective targets on its district-scale land

package.

For further information: Mako Mining Corp., Akiba Leisman, Chief Executive Officer, Telephone:

203-862-7059, E-mail: [email protected] or visit our website at

www.makominingcorp.com and SEDAR www.sedar.com.

Forward-Looking Information:

Statements contained herein, other than historical fact, may be considered “forward -looking

information” within the meaning of applicable securities laws. The forward -looking information

contained herein is based on the Company’s reasonable assumptions and current plans and

expectations, and forward -looking statements contained herein include, wi thout limitation, the

objective of the SW Pit drilling program to delineate new mineral resources amenable to open pit

and underground mining methods in the sparsely tested Southwestern portion of the permitted pit

limit, as well as to test extensions of t his mineralization beyond the permitted pit limit; that the

Company will have an updated mineral resource estimate expected early next year ; the

Company’s plans to move its mining contractor’s workshop are to support future mining activities

in SW Pit area ; and that the Company can operate San Albino profitably in order to fund

exploration of prospective targets on its district -scale land package. Such forward -looking

information is subject to a variety of risks and uncertainties which could cause actual even ts or

results to differ materially from those reflected in the forward -looking information, including,

without limitation, the risk that the ongoing results of the drilling program do not result in a

significant increase in mineral resources at the SW Pit areas; political risks and uncertainties

involving the Company’s exploration properties; the inherent uncertainty of cost estimates and

the potential for unexpected costs and expense; commodity price fluctuations and other risks and

LEGAL*56256690.1

uncertainties as disclo sed in the Company’s public disclosure filings on SEDAR at

www.sedar.com. Such information contained herein represents management’s best judgment as

of the date hereof, based on information currently available and is included for the purposes of

providing investors with the Company’s expectations regarding the Company’s drilling program

at San Albino gold project, and may not be appropriate for other purposes. Mako does not

undertake to update any forward -looking information, except in accordance with appli cable

securities laws.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined

in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy

of this release.