Mako Mining Discovers Another New Gold Bearing Vein at Las Conchitas North; Intersects 37.28 g/t of Au and 34.94 g/t of Ag over 2.5 m (Estimated True Width)
LEGAL*56581033.1
1
595 Burrard Street, Suite 2833
Vancouver, BC V7X 1K8
Tel: (604) 646-1580
www.makominingcorp.com
TSX-V: MKO | OTCQX: MAKOF
Suite 700 - 838 West Hastings St.
Vancouver, BC - V6C 0A6
IR: (647) 203-8793
www.makominingcorp.com
TSX-V: MKO | OTCQX: MAKOF
July 28th, 2022
TSX-V: MKO; OTCQX: MAKOF
Mako Mining Discovers Another New Gold Bearing Vein at Las Conchitas North;
Intersects 37.28 g/t of Au and 34.94 g/t of Ag over 2.5 m (Estimated True Width)
Mako Mining Corp. (TSX-V: MKO; OTCQX: MAKOF) (“Mako” or the “Company”) is pleased to announce
the discovery of a new gold bearing structure at the Las Conchitas-North area of its wholly -owned San
Albino-Murra property. The “Crucita” structure was intersected in a diamond drill hole located
approximately 1.44 kilometers south of the San Albino gold mine (“San Albino”) which is currently in
commercial production.
The Company currently has five of its seven diamond drill rigs in the Las Conchitas area, which is located
between the San Albino Mine and the historical El Golfo Mine located within the Company’s El Jicaro
Concession. Las Conchitas comprises an area of approximately 3.75km2 and it has been subdivided into
three primary areas: Las Conchitas North (“LC-N”), Las Conchitas Central (“LC -C”) and Las Conchitas
South (“LC-S”). Each of these areas host multiple subparallel, northeast-southwest striking, gently dipping
gold bearing veins.
Highlights of the recent drilling at Las Conchitas
Las Conchitas - North
o Crucita (“Cc”) – New Discovery
▪ 37.28 g/t Au and 34.9 g/t Ag over 2.60 m (2.5 m ETW)
o Intermediate (“Int”)
▪ 7.69 g/t Au and 5.2 g/t Ag over 1.20 m (ETW)
o Mina Francisco (“MF”)
▪ 24.75 g/t Au and 20.8 g/t Ag over 2.30 m (2.2 m ETW)
Las Conchitas - Central
o Cruz Grande (“CG”)
▪ 16.92 g/t Au and 29.5 g/t Ag over 2.10 m (2.0 m ETW)
Las Conchitas - South
o Mango (“Mg”)
▪ 51.40 g/t Au and 82.3 g/t Ag over 0.70 m (0.6 m ETW)
o El Limon (“EL”)
▪ 37.02 g/t Au and 54.4 g/t Ag over 2.30 m (2.0 m ETW)
Note * ETW is estimated true width measured from interpreted sections
Akiba Leisman, CEO of Mako states, “Crucita is the second shallow high-grade discovery the Company
has announced over the past 2 months at Las Conchitas. Our objective was always to start producing with
a small resource, on a fraction of the San Albino area, and to use the cash flow from San Albino to unlock
LEGAL*56581033.1
2
the potential of our orogenic gold system. Even Las Conchitas, which is an area 5 times as big as San
Albino, is a small part of our 188 km2 land package, and we expect the pace of additional discoveries to
continue for many years to come across the 28 km of strike potential we have on our property. Over the
course of the next few months, we will release additional exploration results that will continue to show the
true potential of our burgeoning gold mining district.”
Las Conchitas – North
Including the new discovery, five gold bearing structures have been identified in the LC-N area to date.
Currently, three diamond drill rigs are operating at the LC-N area. Two rigs are testing the extension of the
recently discovered Mina Francisco structure (see press release dated June 1, 2022), as well as the San
Pablo and Tirado gold bearing veins. The third rig is designated to test the continuity of the previously
indentified Intermediate zone and to test for additional high grade gold structures. To date, a total of 10,199
meters in the 2022 drilling campaign have been completed in 74 drill holes at the LC-N area, resulting in
the second discovery over the last two months of a high-grade gold structure which has been named the
Crucita vein.
The discovery d rill hole , LC22-908, collared below the known mineralization at the Intermediate zone,
intersected an interval of 37.28 g/t Au and 34.9 g/t Ag over 2.60 m (2.5 m ETW), starting at a vertical depth
of 89.0 m (see attached long and cross section). This hole is the first drill intersect of the Crucita structure
located 211.0 m down dip of a surface expression of the vein (historical Mina Crucita ). Vertical sampling
of the vein, in front of a collapsed historical tunnel, graded up to 55.90 g/t Au and 170.0 g/t Ag over 0.9 m
and 37.60 g/t Au and 209.0 g/t Ag over 0.7 m.
Two additional drill holes, LC22-910 and LC22 -911, designed to test continui ty of the newly discovered
high-grade Crucita vein, intersected mineralized intervals with similar minerology and widths (results
pending), indicating that the strike of the structure extends for an additional 43 m, and 296 m down-dip
from the surface exposure.
This newly discovered zone is open along strike and down dip. An additional 8 drill platforms are being
prepared to further test the zone during the 2022 drill campaign. The structural model, developed by the
Company, confirmed the prospective nature of our underexplored consolidated land package of 188 km2
and has been used to identify this and other drill targets within the entire Las Conchitas area.
The Company recently received additional results from drilling of the Mina Francisco zone. Drill hole LC22-
522 intersected two high -grade intervals of 24.75 g/t Au and 20. 8 g/t Ag over 2.30 m (2.2 m ETW) and
10.50 g/t Au and 14.4 g/t Ag over 0.70 m (ETW) at a vertical depth of 17.0 m and 31.5 m, respectively.
This drill hole confirmed a 40 m SW strike extension of the high-grade mineralization intersected by hole
LC22-524 of 51.80 g/t Au and 29.8 g/t Ag over 0.90 m (ETW) (see press release dated June 1, 2022). Drill
hole LC22-526 intersected, at a vertical depth of 68.8 m, an interval of 35.90 g/t Au and 34.9 g/t Ag over
1.20 m (ETW) extending the strike towards the NE for an additional 26.0 m.
Drilling of the Intermediate zone intersected 7.69 g/t Au and 5.2 g/t Ag over 1.20 m (ETW), in hole LC22-
902, at a vertical distance of 41.5 m. This drill hole extended the strike by 28.0 m to the SW of the high
grade mineralization of 16.65 g/t Au and 12.1 g/t Ag over 1.20 m, intersected by INT18-19 (see press
release dated November 28, 2018).
LEGAL*56581033.1
3
Las Conchitas – Central
At LC-C, drill hole LC22-800 intersected 16.92 g/t Au and 29.5 g/t Ag over 2.10 m (2.0 m ETW) at a vertical
distance of 37.0 m. This hole extended the high grade mineralization along strike for an additional 36.0 m
SW from hole CG18 -24 which intersected 23.63 g/t Au and 25.1 g/t Ag over 5.65 m (see press release
dated December 8, 2018).
Las Conchitas – South
LC-S is the most advance d area in terms of drilling, where 396 drill holes, totaling 36,290 m have been
completed. This area is comprised of four mineralized zones; however, the recent drilling by the Company
was designed to test the continuity of two high grade gold bearing structures.
Drilling designed to extend the Mango zone, intersected 51.40 g/t of Au and 82.3 g/t of Ag over 0.70 m
(0.6 m ETW) at 126.0 m vertical depth, in drill hole LC22-458. This drill hole is located on a previously
untested area and collared 275.0 m northeast from a surface exposure of the vein – Mina Mango. Vertical
sampling of the vein, at the entrance of the Tunnel 2, graded up to 54.17 g/t Au and 57.5 g/t Ag over 1.3
m (see press release dated May 21, 2019).
The best results of drilling within the El Limon area were in hole LC22-467, which intersected 37.02 g/t Au
and 54.4 g/t Ag over 2.30 m (2.0 m ETW) at a vertical depth 52.0 m. This drill hole confirmed a 124.0 m
strike extension of the high grade mineralization of 138.29 g/t Au and 99.0 g/ Ag over 1.45 m, intersected
in drill hole LC21-432 (see attached drill plan and press release dated March 17, 2022).
LEGAL*56581033.1
4
Table: Assay Results Reported in This Press Release
Area Drill Hole From
(m)
To
(m)
*Width
(m) Au g/t Ag g/t Interval **ETW
(m) Zone
LC22-518 101.1 101.8 0.7 5.48 3.40 5.48 g/t of Au and 3.4 g/t of Ag over 0.70 m 0.70 MF
LC22-520 57.9 58.4 0.5 1.20 2.80 1.20 g/t of Au and 2.8 g/t of Ag over 0.50 m 0.50 MF
30.9 31.7 0.8 1.22 1.50
31.7 32.2 0.5 0.12 1.40
32.2 32.7 0.5 45.40 47.70
32.7 33.3 0.6 0.09 1.50
33.3 33.9 0.6 1.35 2.10
55.0 55.4 0.4 2.93 14.00 2.93 g/t of Au and 14.0 g/t of Ag over 0.40 m 0.30
24.2 25.0 0.8 1.52 5.00
25.0 25.6 0.6 13.20 13.50
25.6 26.5 0.9 53.10 39.60
46.4 47.1 0.7 10.50 14.40 10.50 g/t of Au and 14.4 g/t of Ag over 0.70 m 0.60
LC22-525 54.3 55.2 0.9 6.13 21.20 6.13 g/t of Au and 21.2 g/t of Ag over 0.90 m 0.90 MF
68.8 70.0 1.2 35.90 34.90 35.90 g/t of Au and 34.9 g/t of Ag over 1.20 m 1.10 MF
128.5 129.2 0.7 1.92 5.60 1.92 g/t of Au and 5.6 g/t of Ag over 0.70 m 0.60 MF
83.2 84.2 1.0 11.30 8.00 11.30 g/t of Au and 8.0 g/t of Ag over 1.00 m 0.90
85.2 85.7 0.5 1.18 0.90 1.18 g/t of Au and 0.9 g/t of Ag over 0.50 m 0.40
LC22-528 to
LC22-536 Pending
88.5 89.0 0.5 2.93 9.10
89.0 89.5 0.5 6.92 16.40
89.5 90.5 1.0 3.10 3.70
LC22-538 62.5 63.9 1.4 3.08 3.00 3.08 g/t of Au and 3.0 g/t of Ag over 1.40 m 1.20 MF
LC22-539 to
LC22-540 Pending
LC22-541 88.6 89.1 0.6 9.19 13.10 9.19 g/t of Au and 13.1 g/t of Ag over 0.55 m 0.50 MF
LC22-542 Pending
LC22-702 to
LC22-714 Pending
LC22-901 Pending
46.5 47.0 0.5 6.82 8.00
47.0 47.7 0.7 8.31 3.20
LC22-903 to
LC22-907 Pending
115.5 116.5 1.0 1.07 0.60 1.07 g/t of Au and 0.6 g/t of Ag over 1.00 m 0.80
125.1 126.5 1.4 52.70 42.00
126.5 127.7 1.2 19.30 26.70
138.8 139.5 0.7 1.85 0.80 1.85 g/t of Au and 0.8 g/t of Ag over 0.70 m 0.60
LC22-909 to
LC22-911 Pending
LC22-902 7.69 g/t of Au and 5.2 g/t of Ag over 1.20 m 1.20 Int
LC22-908 37.28 g/t of Au and 34.94 g/t of Ag over 2.60 m 2.50 Cc
LC22-527 MF
LC22-537 4.01 g/t of Au and 8.2 g/t of Ag over 2.00 m 1.90 MF
Las Conchitas North
LC22-521 8.20 g/t of Au and 9.3 g/t of Ag over 3.00 m 2.60 MF
LC22-522 24.75 g/t of Au and 20.8 g/t of Ag over 2.30 m 2.20 MF
LC22-526
LEGAL*56581033.1
5
Note: The mineralized intervals shown above utilize a 1.0 g/t gold cut-off grade with not more than 1.0m of internal dilution.
*Widths are reported as drill core lengths. **Estimated True Width is estimated from interpreted sections. In addition to the drill
holes presented in the table above, the following drill holes returned only anomalous values: LC22-441, LC22-444, LC22-448,
LC22-451, LC22-452, LC22-456, LC22-457, LC22-460, LC22-461, LC22-519, LC22-700, LC22-701 and LC22-900.
Sampling, Assaying, QA/QC and Data Verification
Drill core was continuously sampled from inception to termination of the entire drill hole. Sample intervals
were typically one meter with a minimum sample width of 50 cm . Drill core diameter was HQ (6.35
centimeters). Geologic and geotechnical data was captured into a d igital database, core was
photographed, then one-half split of the core was collected for analysis and one -half was retained in the
core library.
49.5 50.3 0.8 7.33 11.30
50.3 50.8 0.5 9.42 12.20
50.8 51.6 0.8 31.20 58.50
LC22-801 52.8 53.9 1.1 1.59 1.30 1.59 g/t of Au and 1.3 g/t of Ag over 1.10 m 1.00 CG
LC22-802 39.0 39.5 0.5 51.10 73.90 51.10 g/t of Au and 73.9 g/t of Ag over 0.50 m 0.40 CG
LC22-803 Pending
LC22-804 75.1 76.0 0.9 19.40 64.20 19.40 g/t of Au and 64.2 g/t of Ag over 0.90 m 0.80 CG
LC22-805 to
LC22-810 Pending
45.7 46.4 0.7 1.22 0.70 1.22 g/t of Au and 0.7 g/t of Ag over 0.70 m 0.60 EL
156.7 157.2 0.5 1.33 5.40 1.33 g/t of Au and 5.4 g/t of Ag over 0.50 m 0.50 Mg
LC22-445 33.0 34.0 1.0 6.61 2.50 6.62 g/t of Au and 2.5 g/t of Ag over 1.00 m 0.90 EL
LC22-446 174.5 175.1 0.7 6.40 1.60 6.40 g/t of Au and 1.6 g/t of Ag over 0.65 m 0.60 Mg
LC22-447 159.0 159.5 0.5 2.47 5.00 2.47 g/t of Au and 5.0 g/t of Ag over 0.50 m 0.50 Mg
LC22-449 193.1 193.6 0.5 2.08 2.60 2.08 g/t of Au and 2.6 g/t of Ag over 0.50 m 0.50 Mg
140.8 141.5 0.7 1.10 1.10 1.10 g/t of Au and 1.1 g/t of Ag over 0.70 m 0.70 Mg
168.7 169.3 0.6 9.49 10.50 9.49 g/t of Au and 10.5 g/t of Ag over 0.60 m 0.60 Mg
LC22-453 125.0 125.5 0.5 7.00 10.30 7.00 g/t of Au and 10.3 g/t of Ag over 0.50 m 0.40 Mg
21.3 22.3 1.0 1.20 1.10 1.20 g/t of Au and 1.1 g/t of Ag over 1.00 m 0.90 EL
78.6 79.7 1.1 15.90 44.00 15.90 g/t of Au and 44.0 g/t of Ag over 1.10 m 0.90 Mg
124.5 125.5 1.0 1.37 9.30 1.37 g/t of Au and 9.3 g/t of Ag over 1.00 m 0.80
128.1 128.8 0.7 51.40 82.30 51.40 g/t of Au and 82.3 g/t of Ag over 0.70 m 0.60
148.3 149.3 1.0 8.32 38.10 8.32 g/t of Au and 38.1 g/t of Ag over 1.00 m 0.80
LC22-459 59.5 60.1 0.6 2.03 6.40 2.03 g/t of Au and 6.4 g/t of Ag over 0.60 m 0.50 Mg
148.5 149.0 0.5 1.86 2.10
149.0 149.5 0.5 0.04 0.20
149.5 150.0 0.5 5.88 2.10
LC22-463 to
LC22-466 Pending
56.0 56.8 0.8 31.20 52.30
56.8 57.7 0.9 50.80 57.60
57.7 58.3 0.6 24.10 52.20
LC22-468 to
LC22-469 Pending
LC22-462 2.59 g/t of Au and 1.5 g/t of Ag over 1.50 m 1.20 Mg
LC22-467 37.02 g/t of Au and 54.4 g/t of Ag over 2.30 m 2.00 EL
Mg
Las Conchitas Central
LC22-800 16.92 g/t of Au and 29.5 g/t of Ag over 2.10 m 2.00 CG
Las Conchitas South
LC22-443
LC22-450
LC22-455
LC22-458
LEGAL*56581033.1
6
Samples were kept in a secured logging and storage facility until such time that they were delivered to the
Managua facilities of Bureau Veritas and pulps were sent to the Bureau Veritas laboratory in Vancouver
for analysis. Gold was analyzed by standard fire assay fusion, 30 -gram aliquot, AAS finish. Samples
returning over 10.0 g/t gold are analyzed utilizing standard Fire Assay-Gravimetric method. The Company
follows industry standards in its QA&QC procedures. Control samples consisting of duplicates, standards,
and blanks were inserted into the sample stream at a ratio of 1 control sample per every 10 samples.
Analytical results of control samples confirmed reliability of the assay data. No top cut has been applied
to the reported assay results.
Qualified Person
John M. Kowalchuk, P.Geo, a geologist and qualified person (as defined under NI 43 -101) has read and
approved the technical information contained in this press release. Mr. Kowalchuk is a senior geologist
and a consultant to the Company.
On behalf of the Board,
Akiba Leisman
Chief Executive Officer
About Mako
Mako Mining Corp. is a publicly listed gold mining, development and exploration company. The Company
operates the high -grade San Albino gold mine in Nueva Segovia, Nicaragua, which ranks as one of the
highest-grade open pit gold mines globally. Mako’s prim ary objective is to operate San Albino profitably
and fund exploration of prospective targets on its district-scale land package.
For further information: Mako Mining Corp., Akiba Leisman, Chief Executive Officer, Telephone: 203-862-
7059, E -mail: [email protected] or visit our website at www.makominingcorp.com and
SEDAR www.sedar.com.
Forward-Looking Information
Statements contained herein that are not historical fact are considered “forward-looking information” within
the meaning of applicable securities laws. Forward-looking information is based on management’s current
expectations, beliefs and assumptions, and includes, without limitation : the objectives of the drilling
campaign; the expectation of additional discoveries to continue for many years to come across the 28 km
of strike potential we have on our property; that we will release additional exploration results over the next
few months that will continue to show the true potential of our burgeoning gold mining district; and that the
Company meets its object of operating San Albino profitably while continuing to fund exploration of
prospective targets. Such forward-looking information is subject to a variety of risks and uncertainties
which could cause actual events or results to differ materially from those reflected in the forward -looking
information, including, without limitation, the risks that additional satisfactory exploration results will not be
obtained; the risk that the Company will not release additional exploration results on the timeline expected;
the risk that additional discoveries will not continue for many years to come ; that exploration results will
not translate into the discovery of an economically viable deposit; risks and uncertainties relating to political
LEGAL*56581033.1
7
risks involving the Company’s exploration and development of mineral properties interests; the inherent
uncertainty of cost estimates and the potential for unexpected costs and expense; commodity price
fluctuations, the in ability or failure to obtain adequate financing on a timely basis and other risks and
uncertainties disclosed in the Company’s public filings at www.sedar.com . Forward-looking information
contained herein is based on management’s best judgment as of the da te hereof, based on information
currently available and is included for the purposes of providing investors with the Company’s plans and
expectations at the Las Conchitas area, and may not be appropriate for other purposes.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the
TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
LEGAL*56581033.1
8
Figure 1 – Drill Hole Plan