Drilling at Las Conchitas Extends Near Surface, High-Grade GOLD Mineralization Across Multiple Intercepts at the Bayacun Zone, Highlighted BY 23.11 G/T GOLD over 5.5 Meters
LEGAL*50541003.1
1
595 Burrard Street, Suite 2833
Vancouver, BC V7X 1K8
Tel: (604) 646-1580
www.makominingcorp.com
TSX-V: MKO | OTCQB: MAKOF
June 15, 2020
PRESS RELEASE - #20-11
TSX-V: MKO; OTCQB: MAKOF
DRILLING AT LAS CONCHITAS EXTENDS NEAR SURFACE, HIGH-GRADE GOLD
MINERALIZATION ACROSS MULTIPLE INTERCEPTS AT THE BAYACUN ZONE,
HIGHLIGHTED BY 23.11 g/t GOLD OVER 5.5 METERS
Mako Mining Corp. (TSX-V: MKO; OTCQB: MAKOF) (“Mako” or the “Company”) is pleased to report positive
drill results from the Bayacun Zone within the Las Conchitas area of its wholly -owned San Albino-Murra property
located in Nueva Segovia, Nicaragua. The Las Conchitas area is located approximately 2.5 kilometers south of the
fully permitted San Albino gold project currently under construction.
The goal of the 2020 drill program at Las Conchitas is to focus on the most promising zones of near surface, shallow
dipping, high-grade gold mineralization in order to delineate a maiden resource estimate. Since 2019, the Company
has completed 65 shallow diamond drill holes totaling 4,351.70 meters (“m”) within the Bayacun Zone, which is
among the most promising zones within the Las Conchitas area. A total of 15,052.75 m within 197 holes have been
drilled at Las Conchitas since the start of the 2019-20 drilling campaign.
This press release includes 23 holes with assay results from the Bayacun Zone (see attached map). Additionally, the
Company has previously released assay results from 15 holes from the Bayacun Zone (see press preleases dated
September 10, 2019, March 11, 2020 and March 25, 2020). A breakdown of the 38 holes reported to date are as
follows:
• 20 holes with composite interval averages greater than 15 g/t Au, including 9 in this press release
• 9 holes with composite interval averages ranging from 5 g/t to 15 g/t Au, including 8 in this press release
• 6 holes with composite interval averages ranging from 1 g/t Au to 5 g/t Au, including 3 in this press release
• 3 holes with values below cut -off grade (less than 1 g/t Au), all reported in this press release , with 1
intersecting a dyke where the vein was expected and the other 2 disturbed by faults
Importantly, 23 of the 38 holes reported to date at the Bayacun Zone encountered at least 1 assay greater than 15 g/t
Au.
The highest grade x thickness interval reported in this press release comes from hole LC20-234, which was designed
to test the strike extension of the Bayacun Zone encountered in previous drilling. Specifically, LC20-234 intersected
23.11 g/t Au and 20.5 g/t Ag over 5.5 m immediately below a void and a sample of mineralized quartz vein grading
7.61 g/t Au and 9.7 g/t Ag over 0.60 m. It is assumed that a portion of the mineralized zone (1.9 m wide) has been
mined out and the down-hole and true thickness of the entire zone is calculated as 8.0 m and 4.4 m, respectively (see
attached cross and long sections). Mineralization in this hole begins 14.6 m from surface.
Other notable intercepts include LC20-220 which intersected 93.3 g/t Au and 61.4 g/t Ag over 0.9 m and LC20-161
which intersected 27.14 g/t Au and 1.7 g/t Ag over 2.2 m. LC20 -161 was drilled to test the down-dip continuity of
the zone, which has now been expanded to over 160 m.
Drill results to date from the Bayacun Zone indicate approximate dimensions of 180 m along strike by 160 m down
dip and continues to be open along strike and at depth.
LEGAL*50541003.1
2
In addition to drilling, assay results from sampling within exploration pit LC20 -EP142 indicate that the stri ke
dimensions of the Bayacun Zone have the potential of being meaningfully expanded. Specifically, exploration pit
LC20-EP142 is situated approximately 200 m from the Rosibel Pit and dump (see attached map) and has returned
channel sample assays of 27.9 g/t Au and 43.9 g/t Au over 0.8 m (vertical), 17.6 g/t Au and 26.1 g/t Ag over 1.2 m
(true width) and 16.9 g/t Au and 33.1g/t Ag over 0.8 m (vertical). The channel samples are continuous samples
perpendicular to the vein using a rock saw and chisel to collect a consistent 10 centimeter wide by 8 centimeter deep
sample.
Drilling is presently being focused down-dip of the surface exposure in exploration pit LC20-EP142 to confirm the
potential strike expansion.
Akiba Leisman, Chief Executive Officer of Mako states, “these high-grade shallow intercepts at Bayacun have been
extremely predictable now that our understanding of the geologic controls at this zone have been refined. Although
the results at Bayacun are noteworthy, it is important to remember that Bayacun is only a part of the overall Las
Conchitas area. There remain a multitude of targets at Las Conchitas that have seen promising results with only
limited drilling, and our overall goal is to link these targets together into a maiden resource to supplement mining
activities a few kilometers to the north at San Albino.”
There are 27 additional drill holes still awaiting assay results from the Bayacun Zone.
Bayacun Zone Assay Results Reported In This Press Release
Drill Hole From
(m)
To
(m)
Width
(m)*
Au
(g/t)
Ag
(g/t) Interval Averages True Width
(m)****
LC20-161 89.00 90.00 1.00 1.41** 0.8 27.14 g/t Au and 1.7 g/t Ag over 2.2 m 1.50 90.00 91.20 1.20 48.58** 2.5
LC20-166 No significant results
LC20-168
49.50 50.10 0.60 15.06** 28.4
6.10 g/t Au and 17.3 g/t Ag over 1.85 m 1.50 50.10 50.90 0.80 0.40** 3.7
50.90 51.35 0.45 4.27** 26.6
LC20-169 Results pending
LC20-180 No significant results
LC20-184 73.20 74.50 1.30 1.24** 1.3 1.32 g/t Au and 3.2 g/t Ag over 2.30 m 2.00 74.50 75.50 1.00 1.43** 5.6
LC20-185 43.40 44.60 1.20 12.78** 24.4 12.78 g/t Au and 24.4 g/t Ag over 1.20 m 1.10
LC20-186 65.80 66.70 0.90 3.06** 3.8 3.12 g/t Au and 2.6 g/t Ag over 1.80 m*** 1.00 66.70 67.60 0.90 3.18** 1.4
LC20-187 23.20 24.90 1.70 7.31** 10.7 7.31 g/t Au and 10.7 g/t Ag over 1.70 m 1.50
LC20-188 to 189 Results pending
LC20-210
12.60 13.90 1.30 6.88** 16.4 5.37 g/t Au and 13.4 g/t Ag over 1.80 m 1.70 13.90 14.40 0.50 1.44** 5.6
19.45 22.45 3.00 Void
LC20-211 18.00 20.00 2.00 Void
20.50 21.00 0.50 7.33** 7.6 7.33 g/t Au and 7.6 g/t Ag over 0.50 m 0.40
LC20-212
17.40 19.85 2.45 Void
19.85 20.50 0.65 6.04** 15.8
3.22 g/t Au and 13.3 g/t Ag over 1.65 m 1.50 20.50 21.50 1.00 1.38** 11.7
LC20-213 37.80 38.80 1.00 15.41** 21.4 15.41 g/t Au and 21.4 g/t Ag over 1.00 m 1.00
LC20-214
36.40 36.90 0.50 1.65** 3.1 1.65 g/t Au and 3.1 g/t Ag over 0.50 m 0.40
59.00 60.00 1.00 4.25** 5.5 7.01 g/t Au and 11.4 g/t Ag over 5.70 m 3.10 60.00 61.00 1.00 0.22** 0.5
LEGAL*50541003.1
3
61.00 61.70 0.70 4.14** 4.4
61.70 62.60 0.90 6.87** 17.1
62.60 63.60 1.00 4.66** 3.3
63.60 64.70 1.10 19.77** 33.8
LC20-215 56.30 57.30 1.00 0.13** 0.7 No significant results
LC20-216 34.10 35.30 1.20 21.00 28.3 21.00 g/t Au and 28.3 g/t Ag over 1.20 m 1.10
LC20-217 to 219 Results pending
LC20-220 27.20 28.10 0.90 93.30 61.4 93.30 g/t Au and 61.4 g/t Ag over 0.90 m 0.80
44.00 45.00 1.00 1.70 275.0 1.70 g/t Au and 275.0 g/t Ag over 1.00 m 0.90
LC20-221 to 222 Results pending
LC20-223 104.80 105.30 0.50 1.95 2.9 8.44 g/t Au and 15.9 g/t Ag over 1.30 m 1.00 105.30 106.10 0.80 12.50 24.0
LC20-224 to 228 Results pending
LC20-229 46.30 47.40 1.10 21.70 34.0 21.70 g/t Au and 34.0 g/t Ag over 1.10 m 1.00
LC20-230 54.45 55.5 1.05 9.66 23.1 9.66 g/t Au and 23.1 g/t Ag over 1.05 m 1.00
LC20-231 54.00 55.10 1.10 22.20 20.0 22.20 g/t Au and 20.0 g/t Ag over 1.10 m 1.00
LC20-232 to 233 Results pending
LC20-234
20.00 20.60 0.60 7.61 9.7 7.61 g/t Au and 9.7 g/t Ag over 0.60m 0.35
20.60 22.50 1.90 Void
22.50 23.70 1.20 3.63 8.2
23.11 g/t Au and 20.5 g/t Ag over 5.5 m 3.00
23.70 24.70 1.00 3.05 3.1
24.70 25.80 1.10 9.37 29.9
25.80 27.00 1.20 7.32 12.7
27.00 28.00 1.00 100.60 51.6
LC20-235 to 236 Results pending
LC20-237
0.00 1.50 1.50 1.03 1.8
Historical dump*** 1.50 3.00 1.50 1.66 2.7
3.00 4.50 1.50 0.95 1.6
4.50 5.60 1.10 18.90 12.3 18.90 g/t Au and 12.3 g/t Ag over 1.10 m 1.00
7.00 8.20 1.20 1.46 2.3 1.36 g/t Au and 4.3 g/t Ag over 2.20 m 1.60 8.20 9.20 1.00 1.23 6.6
LC20-238 to 241 Results pending
LC20-242 37.65 38.65 1.00 47.70 72.5 47.70 g/t Au and 72.5 g/t Ag over 1.00 m 0.80
LC20-243 to 248 Results pending
The mineralized intervals shown above utilize a 1.0 g/t gold cut -off grade with not more than 1.0 meter of internal
dilution. *Widths are reported as drill core lengths. ** Indicates use of metallic screening method for assays. ***
Historical dump is interpreted to be "waste" material from t he mining operations during the period 1870-1920 and
possibly during Spanish times. The grade and distribution of Historical dump material can be erratic and
unpredictable. **** True width is estimated from interpreted sections.
Sampling, Assaying, QA/QC and Data Verification
Drill core was continuously sampled from inception to termination of the drill hole. Sample intervals were typically
one meter. Drill core diameter was HQ (6.35 centimeters). Geologic and geotechnical data was capt ured into a
digital database, core was photographed, then one -half split of the core was collected for analysis and one -half was
retained in the core library. Samples were kept in a secured logging and storage facility until such time that they
were delivered to the Managua facilities of Bureau Veritas and pulps were sent to the Bureau Veritas laboratory in
Vancouver for analysis. Gold was analyzed by standard fire assay fusion, 30-gram aliquot, AAS finish. Samples
returning over 10.0 g/t gold are analyzed utilizing standard Fire Assay-Gravimetric method. Due to the presence of
coarse gold, the Company has used 500-gram metallic screened gold assays for analyzing samples from mineralized
veins and samples immediately above and below drilled veins. This method, which analyzes a larger sample, can be
LEGAL*50541003.1
4
more precise in high-grade vein systems containing coarse gold. All reported drill results in this press release using
the metallic screening method are indicated. The Company follows industry stan dards in its QA&QC procedures.
Control samples consisting of duplicates, standards, and blanks were inserted into the sample stream at a ratio of 1
control sample per every 10 samples. A nalytical results of control samples confirmed reliability of the assay dat a.
No top cut has been applied to the reported assay results.
Qualified Person
John M. Kowalchuk, P.Geo, a geologist and qualified person (as defined under National Instrument 43-101) has read
and approved the technical information contained in this press release. Mr. Kowalchuk is a senior geologist and a
consultant to the Company.
On behalf of the Board,
Akiba Leisman
Chief Executive Officer
About Mako
Mako Mining Corp. is a publicly listed gold mining, development and exploration firm. The Company is developing
its high-grade San Albino gold project in Nueva Segovia, Nicaragua. Mako’s primary objective is to bring San Albino
into production quickly and efficiently, while continuing exploration of prospective targets in Nicaragua.
For further information: Mako Mining Corp., Akiba Leisman, Chief Executive Officer, Telephone: 203-862-7059,
E-mail: [email protected] or visit our website at www.makominingcorp.com and SEDAR
www.sedar.com.
Forward-Looking Statements: Some of the statements contained herein may be considered “forward -looking information”
within the meaning of applicable securities laws. Forward-looking information is based on certain expectations and assumptions,
including that: the goal of the 2020 drill program at Las Conchitas, being to focus on the most promising zones of near surface,
shallow dipping, high-grade gold mineralization in order to delineate a maiden resource estimate, will ultimately be achieved;
the assumption that a portion of the mineralized zone (1.9 m wide) within the Bayacun Zone has been mined out and the down -
hole and true thickness of the entire zone is calculated as 8.0 m and 4.4 m, respectively, as discussed in this press release will
prove to be accurate; the remaining multitude of targets at Las Conchitas that have seen promising results with only limited
drilling will contribute to the Company’s overall goal of linking these targets together into a maiden resource to supplement
mining activities at San Albino ; the Company’s exploration programs will be successfully completed; a maiden resource at the
Las Conchitas may be delineated as a result of the Company’s 2020 drilling; and the Company will be successful in any financing
plans necessary for drilling and construction at the San Albino project. Such forward-looking information is subject to a variety
of risks and uncertainties which could cause actual events or results to differ materially from those reflected in the forward -
looking information, including, without limitation, the risks that additional satisfactory exploration results at the Bayacun Zone
will not be obtained; the risk that the Company’s drilling at Las Conchitas in 2020 will not delineate a maiden resource at the
Las Conchitas area ; that exploration results will not translate into the discovery of an economically viable deposit; risks and
uncertainties relating to political risks involving the Company’s exploration and development of mineral properties interests;
the inherent uncertainty of cost estimates and the potential for unexpected costs and expense; commodity price fluctuations, the
inability or failure to obtain adequate financing on a timely basis and other risks and uncertainties. Such information contained
herein represents management’s best judgment as of the date hereof, based on information currently available and is included
for the pur poses of providing investors with the Company’s plans and expectations at its San Albino project and the Las
Conchitas area, and may not be appropriate for other purposes.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture
Exchange) accepts responsibility for the adequacy or accuracy of this release.