Announcing Completion of MRE Estimate dated April 8, 2026
Military Metals Reports Maiden Inferred Resource Estimate
Containing 67,000 Tonnes of Antimony and 222,000 Ounces of Gold
at Flagship Trojárová Project, Europe
VANCOUVER, BC, April 8, 2026 - Military Metals Corp. (the “Company” or “MILI”)
(CSE: MILI, OTC: MILIF, FSE: QN90) is pleased to announce the completion of a maiden
Inferred Mineral Resource estimate (MRE) of 6.5 Mt at 1.02% Sb and 1.06 g/t Au for 67 thousand
tonnes (kt) of antimony and 222 thousand ounces (koz) of gold at the Company’s wholly owned
flagship Trojárová Project (the “Project”) in Western Slovakia.
Highlights:
• Inferred Mineral Resource of 6.5 Mt at 1.02% Sb and 1.06 g/t Au for 67 kt of
antimony and 222 koz of gold (Table 1)
• Resource estimate incorporated 53 diamond drill holes totaling 7,167 m of drilling
and 55 intervals of underground chip samples totaling 202 m
• Historical MRE is now replaced by a modern MRE that is prepared in accordance
with the 2014 Canadian Institute of Mining, Metallurgy and Petroleum ("CIM")
Definition Standards (CIM, 2014) and the CIM Best Practice Guidelines of Mineral
Resources and Reserves (2019)
Scott Eldridge, Chief Executive Officer of the Company, commented, “The maiden mineral
resource estimate of the Trojárová Project firmly underpins the value of Military Metals.
Following our 2025 confirmation drilling campaign Trojárová has emerged as the largest antimony
resource in the European union that is defined by a modern regulatory standard 1, and among the
largest antimony resources globally. At a time when the need for secure, domestically sourced
critical minerals is more pressing than ever, these results strengthen the project’s potential
importance to, and alignment with, the EU’s objective of building a dependable, home -grown
supply of critical raw materials.”
1The Company defines “ a modern regulatory standard” as NI 43-101, JORC, or S -K 1300
disclosure standards.
Table 1 - Trojárová Mineral Resource Estimate – April 6, 2026
Classification Tonnage Average Grade Contained Metal
(Mt) Sb (%) Au (g/t) Sb (kt) Au (koz)
Inferred 6.5 1.02 1.06 67 222
Notes:
1. The Mineral Resource Estimate was completed by SLR Consulting (Canada) Ltd. ("SLR") in accordance
with the 2014 Canadian Institute of Mining, Metallurgy and Petroleum ("CIM") Definition Standards and
the CIM Best Practice Guidelines of Mineral Resources and Reserves (2019)
2. SLR is independent of Military Metals Corp.
3. The Mineral Resource is reported on a 100% ownership basis.
4. Mineral Resources are estimated at a cut-off grade of 0.8% SbEq.
5. The formula for SbEq is SbEq = Sb % + (Au g/t * 0.562).
6. Mineral Resources are estimated using a long-term antimony price of US$29,000 per tonne and a gold price
of US$3,000 per ounce.
7. A uniform bulk density of 2.82 t/m3 was applied based on the length-weighted mean from laboratory
density determinations from the Project’s main mineralized zone.
8. Metallurgical recovery is 85% for antimony and 85% for gold.
9. The Mineral Resource excludes a 50 m crown pillar.
10. Resource estimation domains were modelled to a 2.0 m minimum width.
11. Totals may vary due to rounding.
The 2026 Trojárová Mineral Resource Estimate
The maiden Mineral Resource Estimate (“MRE”) incorporates all historical and modern drilling
completed on the project, as well as historical underground sampling, comprising 53 diamond
drill holes totaling 7,167 m and 55 underground face chip sampling intervals totaling 202 m.
Three historical drill holes without analytical results available were excluded. Six mineralization
wireframes, each supported by a minimum of two drill holes, were manually built based on
a 0.1% SbEq threshold. A minimum wireframe width of 2.0 m was applied to all zones. Mineral
Resources above the 0.8% SbEq cut-off were reported in four of the six mineralization
wireframes (Figure 1).
Inferred Mineral Resources correspond to areas supported by at least two drill holes with
nominal drill spacing of no more than 150 m. Classification boundaries were locally refined
manually to reflect geological interpretation, grade continuity, and zone thickness.
The MRE is constrained within estimation domains meeting a 2.0 m minimum mining
width. A 50 m crown pillar was also excluded from the MRE.
Resource classification follows the CIM (2014) Definition Standards. Modeling and estimation
were completed in Leapfrog Geo and Leapfrog Edge, and validation included database checks,
wireframe-to-block volume comparisons, statistical reviews, and visual inspections on sections,
plans, and longitudinal sections. Reporting assumes an antimony price of US $29,000 per tonne
and a gold price of US$3,000/oz, with an effective date of April 6th, 2026.
The average grade, minimum mining width and other results or assumptions above do not
guarantee future production.
Figure 1: Trojárová deposit showing Inferred Mineral Resources above cut off (grey), and mineralization wireframes (red)
Exploration Growth Potential
To date no significant mineralization has been intersected beyond the boundaries of the current
Inferred Mineral Resource estimate. However, mineral exploration beyond these boundaries has
also been limited. There is geological evidence of the mineralizing structure or other sympathetic
structures continuing northward along strike within the boundaries of the Trojárová project.
Additional exploration along this corridor could identify targets for future drilling. Furthermore,
the Inferred Mineral Resource is open to depth, where additional drilling has the potential to
incorporate additional volume into future mineral resource estimates.
About the Trojárová Project
Discovered in the late 1970s, Trojárová was the focus of extensive surface and underground
exploration over a 2 km strike length from 1983 to 1995, including 66 diamond drill holes for a
total of 9,049 m and 1.7 km of underground workings . Efforts continued over the years as
additional trenches were dug, and holes were drilled. Starting in 1990, underground development
began, ultimately comprising a 300- metre-long adit connected to a 700- plus-metre-long drive in
the footwall of the mineralized zone, with seven crosscuts into the mineralized zone for sampling.
These efforts culminated in a comprehensive study comprising drill logs, analyses, drill plans,
maps and sections, deposit model studies, petrographic studies, metallurgical studies and more,
now detailed in a multi -volume compendium of reports produced by the Slovak Geological
Institute published in 1992.
The historical work carried out appears comprehensive, detailed and at a professional standard.
The Company considers this historical data relevant, as it will use it as a guide to plan future
exploration programs and informs the I nferred Mineral Resource estimate. The Company also
considers the data to be reliable for these purposes.
The Company completed a confirmation drilling campaign in the winter of 2025 to validate
historical work. Seven diamond drill holes totaling 1,383 m were drilled (Figure 2).
Figure 2: Map of Military Metals' Trojárová Project, Western Slovakia.
Qualified Person
The Mineral Resource estimate was prepared by Luke Evans, M.Sc., P.Eng., Principal Resource
Geologist, Global Technical Director, Geology Group Leader for SLR Consulting (Canada) Ltd.
It is reported in accordance with the CIM Definition Standards (2014). The scientific and technical
information in this news release related to the Trojárová Mineral Resource estimate has been
reviewed and approved by Mr. Ev ans, who is independent of Military Metals Corp. and a
“Qualified Person” under National Instrument 43-101.
SLR is unaware of any environmental, permitting, legal, title, taxation, socio-political, marketing,
or other relevant issues that could materially affect the Mineral Resource estimate.
David Murray, P.Geo., Vice President of Exploration at Military Metals Corp. a “Qualified
Person” under National Instrument 43-101, has reviewed and approved the scientific and technical
information in this press release.
A technical report will be prepared by Qualified Persons in accordance with the requirements of
NI 43-101 and will be filed on SEDAR+ within 45 days of this press release.
About Military Metals Corp.
The Company is a British Columbia-based mineral exploration company that is primarily engaged
in the acquisition, exploration and development of mineral properties with a focus on antimony.
For more information about Military Metals Corp. and its critical minerals initiatives, please visit:
https://www.militarymetalscorp.com.
LinkedIn: https://www.linkedin.com/company/military-metals/
X: https://x.com/militarymetals
Facebook: https://www.facebook.com/profile.php?id=61564717587797
ON BEHALF OF THE BOARD OF DIRECTORS
For more information, please contact:
Scott Eldridge
CEO and Director
[email protected] or [email protected]
For inquiries, please call 604-537-7556
Cautionary Statement regarding Forward Looking Statements
This news release contains "forward-looking information". Often, but not always, forward-looking
statements can be identified by the use of words such as "plans", "expects", "is expected",
"budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", or "believes" or variations
(including negative variations) of such words and phrases, or state that certain actions, events or
results "may", "could", "would", "might" or "will" be taken, occur or be achieved, the continuation
of the value of antimony, and the future needs of Europe and the E.U. specifically. A variety of
factors, including known and unknown risks, many of which are beyond our control, could cause
actual results to differ materially from the forward-looking information in this news release. These
include geopolitical developments related to the supply and value of antimony, the continued use
of antimony and availability of alternatives, availability of capital and labour in respect of the
property that is the subject of this news release, the results of any future exploration activities,
which cannot be guaranteed, and any other future activities in respect of the property held by the
Target. Additional risk factors can also be found in the Company's public filings under the
Company's SEDAR+ profile at www.sedarplus.ca. Forward-looking statements contained herein
are made as of the date of this news release and the Company disclaims any obligation to update
any forward-looking statements, whether as a result of new information, future events or results or
otherwise. There can be no assurance that forward-looking statements will prove to be accurate,
as actual results and future events could differ materially from those anticipated in such statements.
The Company undertakes no obligation to update forward looking statements if circumstances,
management's estimates or opinions should change, except as required by securities legislation.
Accordingly, the reader is cautioned not to place undue reliance on forward-looking statements.
The Canadian Securities Exchange has neither approved nor disapproved the information
contained herein and does not accept responsibility for the adequacy or accuracy of this news
release.