Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

MGM.V ·

Maple Gold Cuts Down-Dip Extension of 531 Zone with 51m Averaging 2.81 G/t Au; and Discovers New Sub- Parallel Gold Zone to the South with 28m of 2.55 G/t Au

Drill Results

Maple Gold Cuts Down-Dip Extension of 531 Zone with

51m Averaging 2.81 G/t Au; and Discovers New Sub-

Parallel Gold Zone to the South with 28m of 2.55 G/t Au

Montreal, Quebec--(Newsfile Corp. - June 5, 2019) -

Maple Gold Mines Ltd.

(

TSXV: MGM) (OTCQB: MGMLF) (Frankfurt: M3G

)

("

Maple

Gold

" or the "

Company

") is very pleased to report assay results from the lone 531 Zone hole drilled in the winter 2019

campaign.

This drill-hole was selected using the Company's recently established 3D model

.

This hole was designed to test the down-dip continuity of mineralisation defined from historical drilling in 1992, as well as to test

for potential new gold zones to the south.

The results stand out not only for their higher grades, but also for grade consistency

. This area remains open for the

potential discovery of additional similar zones for hundreds of metres to the south, southeast and southwest. Highlighted results

for DO-19-262 below (

see Table 1

):

The lower zone gave

51m of 2.81 g/t Au, including

16m of 4.58 g/t Au and 9m of 4.92 g/t Au

(from a downhole

depth of 378m, or about 320m vertical depth). This intercept was significantly broader and higher grade than the adjacent

drill-hole and ended just 3m from the bottom of the hole (remains open down-dip and downhole).

New upper zone gave 28m averaging 2.55 g/t Au, including 9m of 4.71 g/t Au

from a downhole depth of 302m

(estimated vertical depth 255m), a significant broadening of weaker and more limited mineralisation intersected up-dip in

the adjacent hole, i.e. a new zone of mixed contact/structural style of gold mineralisation similar to the higher grade Douay

West Zone.

Excellent potential to extend both zones to depth and make additional discoveries to the south

, where there is

only very sporadic drilling within a 1.8 x 0.5km target area with favourable geology and geophysics (

see Fig. 1

).

Maple Gold's President and CEO, Matthew Hornor, commented:

"It is highly encouraging to receive results of this quality

from one of the drill-holes we selected using our new 3D model. Discovering a new higher-grade gold zone and having the

room and positive indicators in place to expand on this success is a very exciting development for our team that

demonstrates the continued discovery potential within the greater Douay gold system."

Click the following link to view drill core photographs

:

https://bit.ly/2HVlo6X

DO-19-262 was collared on the south edge of the 531 Zone. The proposed 531 SW Target (see Fig 1.) is defined by an area

known to contain syenite, with elongated annular magnetic patterns characteristic of the Douay Resource area and of several

other intrusive-related gold systems in the Abitibi Greenstone Gold Belt.

Fig. 1:

Drill plan on residual total magnetic intensity image.

To view an enhanced version of Fig. 1, please visit:

https://orders.newsfilecorp.com/files/3077/45317_11b05d9df480688b_001full.jpg

The 531 SW Target area is the largest relatively undrilled mag target within the surrounding resource area. The very limited

number of historical drill-holes within this 1.8 x 0.5km area returned only scattered values between 0.25 and 1 g/t Au to-date, but

favourable geological and structural characteristics quite similar to that of the higher grade Douay West Zone (mixed syenite and

basalt with lesser sedimentary rock and strong deformation) make this large target area a priority for further follow up and

potential drilling in subsequent campaigns.

Figure 2

(below)

illustrates the depth continuity of mineralisation below the bottom of the current (Micon 2018)

conceptual pit, and significant improvement in grades and width of mineralisation

in the 2019 hole as compared to

historical holes. Also of note is the location of the new mineralised zone, and possibility for additional such zones to exist further

south where syenite is known to persist. Syenite is also present within the new mineralised zone, although it is minor and

therefore does not appear at the scale of the section in Fig. 2.

Fig. 2:

North-south section 709050E (looking west), including hole DO-19-262. Note far superior grade and width of deeper 2019 intercept vs that in the same

zone in historical drill-hole DO-92-41 (1.47 g/t Au over 18.3m).

To view an enhanced version of Fig. 2, please visit:

https://orders.newsfilecorp.com/files/3077/45317_11b05d9df480688b_002full.jpg

Table 1: Highlighted intercepts from single 531 Zone drill-hole

Hole

UTME

UTMN

Azimuth

Plunge

From

To

Interval

Au g/t

DO-19-262

709047

5489929

358

-59

265.0

268.0

3.0

1.71

DO-19-262

273.0

276.0

3.0

0.82

DO-19-262

286.0

289.0

3.0

4.02

DO-19-262

293.0

294.0

1.0

3.36

DO-19-262

302.0

330.0

28.0

2.55

including

313.0

322.0

9.0

4.71

DO-19-262

378.0

429.0

51.0

2.81

including

390.0

406.0

16.0

4.58

including

420.0

429.0

9.0

4.92

All assays are below capping levels (15 g/t Au) for this zone

(Micon 2018). True widths are about 70% of downhole lengths

and vertical depth is about 85% of downhole depth.

Resource Estimate Update

Initial consultation with RPA earlier this year resulted in suggested refinements and updates to the various wireframes and 3D

model. That internal work has been completed and the Company has now resumed its engagement with RPA, and will be able to

include the winter 2019 drill results into RPA's upcoming resource estimate. Resource estimation update results are now

expected in H2. The Company remains committed to establishing a high quality new baseline estimate, and taking the

necessary time to include the additional model refinements and new drill data contributions will result in a better quality and up-

to-date estimate.

Qualified Person

The scientific and technical data contained in this press release was reviewed and prepared under the supervision of Fred

Speidel, M. Sc, P. Geo., Vice-President Exploration, of Maple Gold. Mr. Speidel is a Qualified Person under National Instrument

43-101 Standards of Disclosure for Mineral Projects. Mr. Speidel has verified the data related to the exploration information

disclosed in this news release through his direct participation in the work.

Quality Assurance (QA) and Quality Control (QC)

Maple Gold implements strict Quality Assurance ("QA") and Quality Control ("QC") protocols at Douay covering the planning and

placing of drill holes in the field; drilling and retrieving the NQ-sized drill core; drill-hole surveying; core transport to the Douay

Camp; core logging by qualified personnel; sampling and bagging of core for analysis; transport of core from site to ALS

laboratory; sample preparation for assaying; and analysis, recording and final statistical vetting of results. For a complete

description of protocols, please visit the Company's QA/QC page on the website at:

http://maplegoldmines.com/index.php/en/projects/qa-qc-qp-statement

About Maple Gold

Maple Gold is an advanced gold exploration and development company focused on defining a district-scale gold project in one

of the world's premier mining jurisdictions. The Company's ~355 km² Douay Gold Project is located along the Casa Berardi

Deformation Zone (55 km of strike) within the prolific Abitibi Greenstone Belt in northern Quebec, Canada. The Project benefits

from excellent infrastructure and has an established gold resource

3

that remains open in multiple directions. For more

information please visit

www.maplegoldmines.com

.

ON BEHALF OF MAPLE GOLD MINES LTD.

"Matthew Hornor"

B. Matthew Hornor, President & CEO

For Further Information Please Contact:

Mr. Joness Lang

VP, Corporate Development

Cell: 778.686.6836

Email:

[email protected]

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS

DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY

OR ACCURACY OF THIS PRESS RELEASE.

Forward Looking Statements:

This news release contains "forward-looking information" and "forward-looking statements" (collectively referred to as "forward-

looking statements") within the meaning of applicable Canadian securities legislation in Canada, including statements about the

prospective

mineral potential of the Porphyry Zone, the potential for significant mineralisation from other drilling in the referenced

drill program and the completion of the drill program. Forward-looking statements are based on assumptions, uncertainties and

management's best estimate of future events. Actual events or results could differ materially from the Company's expectations

and projections. Investors are cautioned that forward-looking statements involve risks and uncertainties. Accordingly, readers

should not place undue reliance on forward-looking statements. For a more detailed discussion of such risks and other factors

that could cause actual results to differ materially from those expressed or implied by such forward-looking statements, refer to

Maple Gold Mines Ltd.'s filings with Canadian securities regulators available on

www.sedar.com

or the Company's website at

www.maplegoldmines.com

.

The Company does not intend, and expressly disclaims any intention or obligation to, update or

revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by

law.

To view the source version of this press release, please visit

https://www.newsfilecorp.com/release/45317