Minaurum Commences Phase II Drilling at Alamos Silver Project
NEWS RELEASE
MINAURUM GOLD INC.
FOR RELEASE: July 15, 2020 TRADING SYMBOL TSX.V:MGG
(MGG 2020 – NR #8)
Minaurum Commences Phase II Drilling at Alamos Silver Project
Minaurum Gold, Inc (“Minaurum”) announces the commencement of a minimum 20,000-metre
Phase II drilling program at its Alamos Silver project in Sonora, Mexico. Phase II involves
systematically stepping out from discoveries made during Phase I drilling beginning with two drill
rigs. One drill will offset the Europa-Guadalupe discovery hole (AL17-007) which returned 8.25
m grading 1,760 g/t silver (see News Release dated 18 January 2018) . The other drill will tes t
targets at Promontorio, both along the vein trend and beneath the Promontorio Mine where recently
acquired historical data revealed holes that returned up to 12.2 m grading 710 g/t silver (see News
Release dated February 6th, 2020).
“We are excited to begin stepping out from our numerous Phase I Drilling discoveries. Phase
I confirmed our geological model , proved that Alamos is a silver district and generated a
significant inventory of high-grade vein targets for Phase II drilling,” stated Darrell Rader,
President and CEO of Minaurum. “We’ll focus first on Europa-Guadalupe and Promontorio
as well as the Nueva Europa vein that lies between them. With multiple rigs drilling 75 to
150 m step-outs, we anticipate a considerable amount of news flow over the next 12 -18
months.”
Covid-19 Protocols
Minaurum has set up a system of protocols approved by the Mexican federal, state, and local health
authorities to minimize physical contact with surrounding communities and ensure the health and
safety of its employees, contractors, families, and local communities. The Phase II program is
being conducted from a camp isolated from the community. Personnel will continue to be tested
for the presence of the coronavirus and monitored for symptoms on an ongoing basis.
Phase II Drilling
To prioritize Phase II drilling, Minaurum’s technical team divided Alamos’ vein inventory into 3
tiers based on Phase I drilling, recently acquired historical drill information, and surface geological
information such as host rocks and structural flexures (Figure 1) . Phase II will start with Tier 1
targets, most notably the Europa-Guadalupe vein zone and the Promontorio zone (Table 1, Figure
1, 2, 3, 4, and 5). Tier 2 and Tier 3 vein zones will see drilling later in the program.
Table 1. Phase II tiered priority vein targets at the Alamos project.
Tier 1 Tier 2 Tier 3
Europa - Guadalupe Quintera La Dura Oeste
Promontorio El Tigre Amalia
Nueva Europa Promontorio Sur Rosario
San Jose Ana Carrera
Pulpito Las Animas Cocinera
Travesia Cotera Tijera
Minas Nuevas La Dura
Alessandra San Manuel
El Creston
Salvial
Figure 1. Phase II prioritized vein zone targets at the Alamos project. Click to expand.
Europa-Guadalupe Vein Target
Drilling will begin with step-outs of 75 to 150 m, up- and down-dip, and along strike from the
Europa-Guadalupe discovery made in Hole AL 17-007 (Table 2).
Table 2. Hole AL17-007 Europa-Guadalupe vein zone intercept.
Hole From (m) To (m) Interval
(m)
Ag (g/t_) Au (ppb) Cu (%) Pb (%) Zn (%)
AL17-007 534.65 542.9 8.25 1760 58 1.60 1.48 2.60
including
534.65 536.85 2.2 5098 42 2.76 0.47 1.18
Promontorio Vein Target
The Promontorio Mine exploited three principal veins: Veta Guijas, Veta Grande, and Veta del
100 (Figures 4 and 5) and historical reports mention an undeveloped vein lying to the west. Post-
mining (1960s-80s) drilling cut significant high-grade mineralization in all three veins more than
50 m below the bottom of the mine over an aggregate 735 m of strike length. Assay highlights
from the Promontorio mine underground drilling a re in Table 3. Phase II drilling will step-out
75 to 150 m, down-dip and along-strike of the veins at Promontorio.
Table 3. High grade intercepts from Alamos Mining Co’s. 1961 underground drilling program below historical
workings in the Promontorio mine. Intervals are drilled thickness.
Hole
Meters
g/t Ag Comment Vein Area
From To Interval
U-1
113.4 114.6 1.2 161 Below historical
workings Veta Grande
114.6 115.8 1.2 1008
U-4
0.0 4.6 4.6 305
Below historical
workings
Between Veta Grande and
Veta del 100 67.1 68.4 1.4 377
72.5 76.2 3.7 823
Figure 2. Existing and proposed drilling, Europa -
Guadalupe and Nueva Europa vein zones. Data
indicate a 55 degree ESE dip on the Europa -
Guadalupe zone. Click image to expand.
Figure 3. Europa-Guadalupe Cross-Sections of
Phase II Drilling. Click image to expand.
76.2 80.2 4.0 1111
80.2 84.7 4.6 274
U-7 62.5 65.2 2.7 274 Below historical
workings Tirito/Guijas
U-8 80.5 82.6 2.1 247
U-16 23.8 25.3 1.5 219 Below historical
workings Veta Grande
Figure 4. Existing and proposed drilling at the
Promontorio vein zone. Click image to expand.
Figure 5. Promontorio vein zone, cross-sections of
Phase II Drilling. Click image to expand.
Nueva Europa Vein Target
Nueva Europa cuts andesitic agglomerate, tuff, and flows; strikes north-northeast and dips steeply
east. It has been traced for more than 1 ,500 m and is open to the north and south. Vein widths
range from surface stringers to the vein/breccia zone measuring 1.2 m wide cut in Hole AL17-007
that assayed 542 g/t Ag, 16 ppb Au, 0.28% Cu, 0.44% Pb, and 0.88% Zn. The Nueva Europa vein
is hosted in a down -dropped block and consists of quartz -carbonate veinlets and breccia fill.
Minaurum believes this indicates that the vein is exposed and cut at a high level and could
potentially widen and increase in grade at depth. Down-dip and along-strike step-outs from the
AL17-007 intercept will be drilled during Phase II.
Phase I Exploration Wrap-up
Assays have been received for holes AL19-039 and AL19-040, the last two holes of the Alamos
Phase I program. These were drilled in the Alessandra vein zone in the eastern part of the project
area (Table 4). The highlights were 12.45 m of 0.91% Cu cut in Hole AL19-039.
Holes AL19-039 and AL19-040 were drilled approximately 300 m and 620 m north -northeast of
hole AL19-038, respectively. As reported in Minaurum’s January 20, 2020 News Release, Hole
AL19-038 cut 6.60 m of 3.89% combined Cu, Pb, and Zn with specular hematit e and quartz
veining cutting skarn and hornfels.
Table 4. Mineralized intervals for holes AL19-039 and AL19-040.
Hole From (m) To (m) Interval (m) Ag g/t Au ppb Cu % Pb % Zn %
AL19-
039
175.85 188.30 12.45 4 25 0.91 0.50 1.17
including
182.35 183.00 0.65 21 11 5.58 0.63 0.93
AL19-
040 No Significant Results
Minaurum Engages Native Ads
Minaurum has entered into a 12-month programmatic digital advertising campaign for a total cost
of US$200,000. The campaign includes, but is not limited to: content creation, web development,
media buying and distribution, advertising development, and campaign reporting and
optimization. A budget of US$150,000 from this payment will be allocated for digital advertising,
paid distribution, and media buying and US$50,000 will be allocated for production, managed
services and management fees over the campaign period. Neither Native Ad s nor any of its
directors and officers own any securities of Minaurum.
Minaurum Gold Inc. (MGG | TSX Venture Exchange; MMRGF | OTC; 78M Frankfurt) is
a Mexico-focused explorer concentrating on the high -grade Alamos Silver Project in southern
Sonora. Wit h a property portfolio encompassing multiple additional district -scale projects,
Minaurum is managed by one of the strongest technical and finance teams in Mexico. Minaurum's
goal is to continue its founders' legacy of creating shareholder value by making district-scale
mineral discoveries and executing accretive mining transactions. For more information, please
visit our website at www.minaurum.com and our YouTube Minaurum Video Channel.
ON BEHALF OF THE BOARD
“Darrell A. Rader”
Darrell A. Rader
President and CEO
For more information, please contact:
Sunny Pannu – Investor Relations Manager
(778) 330 0994 or via email at [email protected]
The TSX Venture Exchange does not accept responsibility for the adequacy or accuracy of this
news release.
___________________________________________________________________________
2300 – 1177 West Hastings Street Telephone 778 330-0994
Vancouver, BC V6E 2K3 www.minaurum.com
Stephen R. Maynard, Vice President of Exploration of Minaurum and a Qualified Person as defined by National
Instrument 43 -101, reviewed and verified the assay data, and has approved the disclosure in this News Release.
Historical data reported in this news release has not been verified.
Cautionary Note Regarding Forward Looking Statements: Certain disclosures in this release constitute forward -
looking information. In making the forward-looking statements in this release, Minaurum has applied certain factors
and assumptions that are base d on Minaurum’ s current beliefs as well as assumptions made by and information
currently available to Minaurum. Although Minaurum considers these assumptions to be reasonable based on
information currently available to it, they may prove to be incorrect, and the forward-looking statements in this release
are subject to numerous risks, uncertainties and other factors that may cause future results to differ materially from
those expressed or implied in such forward -looking statements. Readers are cautioned not to place undue reliance
on forward-looking statements. Minaurum does not intend, and expressly disclaims any intention or obligation to,
update or revise any forward -looking statements whether as a result of new information, future events or otherwise ,
except as required by law.
Quality Assurance/Quality Control: Preparation and assaying of drilling samples from Minaurum's Alamos project
are done with strict adherence to a Quality Assurance/Quality Control (QA/QC) protocol. Core samples are sawed
in half and then bagged in a secure facility near the site, and then shipped by a licensed courier to ALS Minerals'
preparation facility in Hermosillo, Sonora, Mexico. ALS prepares the samples, crushing them to 70% less than 2mm,
splitting off 250g, and pulverizing the split to more than 85% passing 75 microns. The resulting sample pulps are
prepared in Hermosillo, and then shipped to Vancouver for chemical analysis by ALS Minerals. In Vancouver, the
pulps are analyzed for gold by fire assay and ICP/AES on a 50-gram charge. In addition, analyses are done for a 48-
element suite using 4 -acid digestion and ICP analysis. Samples with si lver values greater than 100 g/t; and copper,
lead, or zinc values greater than 10,000 ppm (1%) are re -analyzed using 4 -acid digestion and atomic absorption
spectrometry (AAS).
Quality-control (QC) samples are inserted in the sample stream every 20 samples, and thus represent 5% of the total
samples. QC samples include standards, blanks, and duplicate samples. Standards are pulps that have been prepared
by a third -party laboratory; they have gold, silver, and base -metal values that are established by an e xtensive
analytical process in which several commercial labs (including ALS Minerals) participate. Standards test the
calibration of the analytical equipment. Blanks are rock material known from prior sampling to contain less than
0.005 ppm gold; they test the sample preparation procedure for cross-sample contamination. In the case of duplicates,
the sample interval is cut in half, and then quartered. The first quarter is the original sample, the second becomes the
duplicate. Duplicate samples provide a tes t of the reproducibility of assays in the same drilled interval. When final
assays are received, QC sample results are inspected for deviation from accepted values. To date, QC sample
analytical results have fallen in acceptable ranges on the Alamos project.