Mercado Minerals Announces Initial Surface Results from the Zamora Project, Highlights 1.00 Metre of 828 g/t Silver at the Campanillas Vein
Mercado Minerals Announces Initial Surface
Results from the Zamora Project, Highlights
1.00 Metre of 828 g/t Silver at the Campanillas
Vein
Vancouver, British Columbia--(Newsfile Corp. - September 2, 2026) -
Mercado Minerals Ltd.
(CSE:
MERC) (OTCQB: MRMNF)
("
Mercado
" or the "
Company
") is pleased to announce initial surface
sample results from the Company's first reconnaissance field program at its Zamora project in Sinaloa,
Mexico. The ongoing program is focused on verifying historic high-grade results reported by previous
operators at the Campanillas Vein and expanding the known zone of mineralization along strike. Surface
chip sampling returned multiple high-grade intervals, including 1.00 metre of 828 g/t silver (760 g/t
AgEq
1
) and 1.00 metre of 410 g/t silver with 1.66 g/t gold (497 g/t AgEq).
Highlights:
To date, a 300 metre strike length of the Campanillas Vein has been mapped and sampled at
surface
2026 surface sampling has returned
2.40 metres (true width) of 528 g/t silver and 0.75 g/t gold
(536 g/t AgEq)
including
1.00 metre of 828 g/t silver (760 g/t AgEq)
– the highest grade
surface composite result (samples G874286, 87 and 88) returned to date at the Campanillas Vein
Surface prospecting and mapping has doubled the known strike length of the Campanillas Vein
and encountered wider true widths of mineralized vein and wallrock compared to the underground
workings
Table 1. Campanillas Vein Surface Chip Sampling Results
1
Sample ID
Sample
Type
Sample Length
(m)
Lithology
Ag
(g/t)
Au
(g/t)
Pb
%
Zn
%
AgEq
(g/t)
G874281
Chip
1.50
Quartz Vein
100
0.14
0.05
0.04
102
G874282
Chip
1.00
Andesite tuff
2
0.01
0.02
0.03
3
G874283
Chip
0.80
Andesite tuff
25
0.04
0.02
0.02
26
G874284
Chip
0.60
Quartz Vein
121
0.13
0.03
0.07
120
G874285
Chip
0.40
Quartz Vein
21
0.03
0.02
0.05
21
Sample ID
Sample
Type
Sample Length
(m)
Lithology
Ag
(g/t)
Au
(g/t)
Pb
%
Zn
%
AgEq
(g/t)
G874286
Chip
1.00
Silicified
Andesite
828
0.07
0.09
0.22
760
G874287
Chip
0.40
Andesite
70
0.15
0.04
0.09
76
G874288
Chip
1.00
Quartz Vein
410
1.66
0.03
0.04
497
G874289
Chip
0.60
Quartz Vein
178
0.36
0.01
0.01
189
G874290
Chip
1.00
Quartz Vein
23
0.02
0.00
0.01
23
1
Silver-equivalent values are calculated assuming typical recoveries based on metallurgical studies conducted on analogous epithermal vein
deposits and are not necessarily reflective of metallurgy on the property. No metallurgical work has been reported on the property. The recoveries
used are 91% silver, 94% gold, 70% lead, and 75% zinc. The silver – equivalent formula is: ((24 * silver (g/t)*0.91 / 31.1035) + (1900 * gold
(g/t)*0.94 / 31.1035) + (0.90 * 2204 * lead %*0.7/100) + (1.10 * 2204 * zinc %*0.75/100))*(31.1035 / 24). Metal price assumptions are US$24/oz
silver, US$1900/oz gold, US$0.90/lb lead and US$1.10/lb zinc. Numbers may not match due to rounding.
Figure 1
– Zamora Project plan map of surface mapping and sampling at the Campanillas Vein target.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/12124/312453_24f113a2842b89db_001full.jpg
CEO Comment
Daniel Rodriguez, CEO & Director, commented:
"These initial surface results are highly encouraging and confirm the high-grade nature of the
Campanillas Vein. Grades as high as 828 g/t silver confirm the exceptional grade potential we identified
at Zamora, and our sampling extends mineralization beyond the historic underground workings, pointing
to a larger high-grade mineralizing system along the broader vein trend."
Campanillas Vein Surface Chip Sampling Results
Detailed mapping and sampling along the exposed surface trend of the Campanillas Vein has revealed
a 300-metre-long segment of vein. The vein consists of massive to vuggy quartz with minor carbonate
and trace occurrences of fine-grained dark sulphides and/or sulphosalts and pyrite. The vein is also
coated with iron and manganese oxides. The host rock is an andesitic tuff that has moderate argillic
alteration and silicification proximal to the vein. Systematic chip sampling of the vein and wall rock
indicate the Campanillas Vein has approximate true widths between 0.60 and 2.40 metres, and grades
between 2 and 828 g/t silver, and 0.04 and 1.66 g/t gold.
Initial Field Program
The Company's initial field program comprised prospecting and chip sampling across surface
exposures of the Campanillas Vein, designed to verify historic high-grade results reported by previous
operators. The Company plans to extend systematic surface sampling and mapping to the remaining
current concessions.
Quality Assurance/Quality Control and Chain of Custody
Rock samples are chip samples. All chip samples are laid out with visual sample interval marks, across
the perceived true width of the vein, before being systematically chipped into sample bags. Once
bagged, samples are grouped into rice bags and secured by a locking security tag with a unique
security tag identification number.
Sample batches are transported from the exploration site in Zamora
to a secured courier transport service vehicle provided by ALS Laboratories.
The samples are delivered
by ALS secured courier to their laboratory in Hermosillo for analysis.
Samples are crushed by ALS to over 70 per cent passing below two millimetres and split using a riffle
splitter. Sample splits are then pulverized to over 85 per cent passing below 75 microns. Gold
determinations are completed by fire assay with an atomic absorption (AA) finish on a 30 g subsample
of the prepared pulp (Au-AA23). Any sample returning over 10 g/t gold is re-analyzed by fire assay with a
gravimetric finish on a 50 g subsample (Au-GRA21). In addition, a 34-element analysis is performed on
a 0.25 g subsample of the prepared pulps by a four acid digestion followed by an inductively coupled
plasma atomic emission spectroscopy (ICP-AES) finish (ME-ICP61). Samples that return overlimit
values for silver, lead or zinc are finished by Ore Grade analysis (Ag-OG62, Pb-OG62 and/or Zn-OG62).
Qualified Person
The technical information in this news release has been prepared in accordance with the Canadian
regulatory requirements set out in National Instrument 43-101 (Standards of Disclosure for Mineral
Projects) and was reviewed and approved by Kelson Willms, P.Geo., of Archer, Cathro & Associates
(1981) Limited.
Mr. Willms is a Qualified Person for the purposes of National Instrument 43-101.
About Mercado Minerals Ltd.
Mercado Minerals Ltd. (CSE: MERC) (OTCQB: MRMNF) is a silver-focused exploration company
targeting the next world-class discovery in Mexico's emerging Western Silver Belt, part of the prolific
Sierra Madre Occidental mining district. With a proven team boasting extensive experience in Mexican
exploration, Mercado is actively advancing multiple projects across more than 3,000 hectares. The
Company is committed to creating shareholder value through disciplined exploration, strategic growth,
and discovery-driven results.
For further information, contact:
Daniel Rodriguez
CEO & Director
Phone: (604) 353-4080
Email:
John Fraser
VP Business Development & Director
Phone: (604) 838-7677
Email:
Forward-Looking Statement (Safe Harbor Statement):
This press release contains forward-looking statements within the meaning of applicable securities laws.
The use of any of the words "anticipate," "plan," "continue," "expect," "estimate," "objective," "may,"
"will," "project," "should," "predict," "potential" and similar expressions are intended to identify forward-
looking statements. In particular, this press release contains forward-looking statements concerning the
Company's exploration plans and the intended use of proceeds from the Offering.
Although the Company
believes that the expectations and assumptions on which the forward-looking statements are based are
reasonable, undue reliance should not be placed on these statements because the Company cannot
provide assurance that they will prove correct. Forward-looking statements involve inherent risks and
uncertainties, and actual results may differ materially from those anticipated. These forward-looking
statements are made as of the date of this press release, and, except as required by law, the Company
disclaims any intent or obligation to update publicly any forward-looking statements.
Neither the Canadian Securities Exchange nor its Regulation Services Provider (as defined in the
policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of
this release.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/312453