Metals Creek Drills 63.9 Meters of 1.94% Copper and 10 g/t Silver at the Tillex Copper Project Strong near surface high grade base metal mineralization over large widths Mineralized porphyry with chalcopyrite mineralization
Metals Creek Drills 63.9 Meters of 1.94%
Copper and 10 g/t Silver at the Tillex Copper
Project
Strong near surface high grade base metal mineralization over large widths
Mineralized porphyry with chalcopyrite mineralization
Thunder Bay, Ontario--(Newsfile Corp. - October 22, 2024) -
Metals Creek Resources Corp. (TSXV:
MEK) (FSE: M1C1) (the "Company" or Metals Creek)
is pleased to announce the results from the
first hole of the recently completed (See News Release: September 17, 2024) diamond drilling program
at the Tillex Copper Project located in Currie Township, 65 km east of Timmins, Ontario and
approximately 45 km from the Kidd Creek Met site.
TX24-021 targeted near surface, mineralized graphitic argillites and dacitic tuffs in an effort to upgrade
areas of limited drilling and further refine the current geological model. Hole TX24-021 was engineered
to infill a gap in the central portion of the Tillex Zone on a section where no holes have been drilled with
the purpose of increasing our confidence in the continuity of mineralization. This hole returned a down
hole intercept of 63.9 meters (m) (38.6m to 102.5m) of 1.94% Copper (Cu) and 10.22 grams per tonne
(g/t) Silver (Ag) (See Fig.1: Schematic Cross Section). Included in this interval is two higher grade
intervals of 3.21% Cu and 4.77g/t Ag over 15.2m (54m to 69.2m) and 2.58% Cu and 15.88g/t Ag over
17.9m (83.6m to 101.5m). Higher grade silver was also intercepted with a downhole intercept of 32.95
g/t Ag and 1.70% Cu over 6.0m (43m to 49m). See Table 1 Drill intercepts for TX24-021 below.
Hole Number
Meters From
Meters To
Total Meters
Cu %
Ag g/t
TX24-021
38.60
102.50
63.90
1.94
10.22
including
43.00
49.00
6.00
1.70
32.95
and
54.00
69.20
15.20
3.21
4.77
and
83.60
101.50
17.90
2.58
15.88
Table 1: Drill intercepts for hole TX24-021
Note: True widths are approximately 70-80% of downhole intercept
Fig 1: Schematic Cross Section 135N, Hole TX24-021
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/943/227377_56343351044988f5_002full.jpg
Mineralization consists of locally very fine, pervasive disseminated chalcopyrite, cross-cutting
chalcopyrite stringers as well as local blebby style to narrow massive chalcopyrite veins with local pyrite
and pyrrhotite.
Galena and sphalerite is also present locally. Alteration consists mainly of chlorite and
locally pervasive clay alteration. The mineralized argillites within the Tillex Deposit are structurally
complex with significant folding and fracturing. Mineralized feldspar porphyry is also present within the
argillites further adding to the exploration potential to the Tillex Copper Project. Copper assays within the
porphyry ranged from 0.32 to 1.44%.
Included in this release is several previously released drill core photos' (See news release September
17, 2024) highlighting the different styles of chalcopyrite mineralization encountered in this program. The
reader is cautioned that these photos are for illustration purposes highlighting the different styles of
mineralization and do not represent mineralization through the entirety of the holes.
Management is highly encouraged with the results from this first hole received and anxiously await
results for remaining holes. Of particular interest is the chalcopyrite mineralization within the potassic
altered feldspar porphyry with associated sericite alteration. Chalcopyrite ranges from blebby to stringer
mineralization within the feldspar porphyry and is closely associated with quartz veins and pods (See
Photo 4). All drill core has been cut and sent to the laboratory and results will be released once they are
received and compiled.
The Tillex project is host to the Tillex copper deposit which was originally discovered in 1973 by Westmin
Resources Ltd.
A historic
non 43-101 compliant
near surface resource of 1,338,000 tonnes grading
1.56% Copper (Cu) was calculated in 1990 by Pacifica Resources Ltd (Source; Pacifica Resources
Ltd., 2005-6 Canadian Mines Handbook, page 318). Mineralization is primarily chalcopyrite with minor
bornite and accessory lead, zinc and silver. However, management notes this calculation does not meet
the standards as outlined in National Instrument 43-101, "Standards of Disclosure for Mineral Projects",
and has not been independently validated or verified by the Corporation and should not be relied upon.
Michael MacIsaac, P.Geo and VP Exploration for the Corporation and a qualified person as defined in
National Instrument 43-101, is responsible for this release, and supervised the preparation of the
information forming the basis for this release.
Photo 1: Mineralized graphitic argillite with stringer, nodular and semi-massive chalcopyrite TX24-020
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/943/227377_56343351044988f5_003full.jpg
Photo 2: Massive chalcopyrite within mineralized graphitic argillite Hole TX24-020
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/943/227377_56343351044988f5_004full.jpg
Photo 3: Stringer chalcopyrite mineralization within graphitic argillite TX24-022
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/943/227377_56343351044988f5_005full.jpg
Photo 4: Mineralized Potassic Altered Feldspar Porphyry with Stringer and Blebby CPY
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/943/227377_56343351044988f5_006full.jpg
All samples were sent to Activation Laboratories.
Samples utilized aqua regia digestion with analysis
performed by ICP. Over limits were performed by ICP-OES. As part of the Corporations QAQC protocol,
approximately 10% of the samples submitted for assay were also sent for check assays.
Standards and
blanks were inserted randomly into the sample shipments as part of the sampling protocol.
About Metals Creek Resources Corp.
Metals Creek Resources Corp. is a junior exploration company incorporated under the laws of the
Province of Ontario, is a reporting issuer in Alberta, British Columbia and Ontario, and has its common
shares listed for trading on the Exchange under the symbol "MEK". Metals Creek has earned a 50%
interest in the Ogden Gold Property from Newmont Corporation, including the former Naybob Gold mine,
located 6 km south of Timmins, Ontario and has an 8 km strike length of the prolific Porcupine-Destor
Fault (P-DF). In addition, Metals Creek owns and/or has option agreements in place to acquire a 100%
interest in claims in the Shabaqua Corners area of North western Ontario.
Metals Creek also has multiple quality projects available for option which can be viewed on the
Company's website. Parties interested in seeking more information about properties available for option
can contact the Company at the number below.
Additional information concerning the Company is contained in documents filed by the Company with
securities regulators, available under its profile at
www.sedarplus.ca
.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
Alexander (Sandy) Stares, President and CEO
Metals Creek Resources Corp
MetalsCreek.com
Twitter.com/MetalsCreekRes
Facebook.com/MetalsCreek
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/227377