Metals Creek Drills 3.66 g/t Gold over 14.66 meters at The Ogden Gold Project
Metals Creek Drills 3.66 g/t Gold over 14.66
meters at The Ogden Gold Project
Thunder Bay, Ontario--(Newsfile Corp. - November 15, 2022) -
Metals Creek Resources
Corp.
(
TSXV: MEK
)
(
OTCQB: MCREF
)
(
FSE: M1C1
) (the "
Company
" or
Metals Creek
) is pleased
to announce results for the final 6 holes of a nine (9) hole diamond drill program (See News Release
February 7, 2022) on the Ogden Gold Project in Timmins, Ontario. The Ogden Gold Project is a 50/50
Joint Venture with Newmont Corporation ("
Newmont
"), with the Company serving as the operator.
Drilling primarily focused on the Thomas Ogden Zone (TOG) with two peripheral targets also tested (See
Fig. 1, Ogden DDH Planmap). Drilling at TOG targeted the potential of flat lying quartz bearing/siliceous
secondary structures as well as strongly altered conglomerates and felsites.
The altered conglomerates
and felsites host pyrite +/- arsenopyrite and local free gold mineralization within the lowermost portion of
the currently identified TOG fold structure. High-grade gold mineralization within TOG has a strong
preferential association with the TOG fold axis, which has a shallow plunge to the east.
Highlights of the drilling include:
TOG-22-74A returned a downhole intercept (351.40 - 366.06m) of 3.66 grammes per ton (g/t)
gold (Au) over 14.66 meters (m) including 4.30m (361.76 - 366.06m) of 5.13 g/t Au, visible gold
was noted in this intercept
. This hole (See attached Schematic Cross Section 1200W Fig. 2) was
drilled below hole TOG-21-65A which returned a downhole intercept of 9.20 g/t Au over 4.47m (See
News release January 27, 2022) to better define our understanding of potential shallow dipping gold
mineralization associated with interpreted secondary cross cutting mineralized structures. Strong
albitization with associated silicification and local fuchsite are within an altered conglomerate.
Mineralization consists of finely disseminated pyrite (1-6%) with associated arsenopyrite (0.5 - 2%).
Local white quartz carbonate veinlets with associated pyrite is also present. Several clusters of visible
gold are present along quartz-carbonate vein boundaries with associated pyrite mineralization.
TOG-22-70 returned a downhole intercept (357.44 - 360.88m) of 1.96 g/t Au over 3.44m. A second zone
of high-grade gold mineralization was cut, returning a downhole intercept of 0.73m (405.48 - 406.21m) of
12.7 g/t Au. This hole (See attached Schematic Cross Section 1200W Fig. 2) was drilled to further
define mineralization above hole TOG-21-65A.
Upper mineralization occurred at the contact between
altered felsite and conglomerate with associated pyrite and arsenopyrite mineralization. Significant
quartz veining is present locally. The second zone returning 12.7 g/t Au over 0.73m is hosted within a
silicified intermediate dike with associated pyrite (4-5%) mineralization.
OG22-046 returned a downhole intercept (142.24 - 150.00m) of 0.35 g/t Au over 7.76 m.
This hole was
drilled to test an SGH soil anomaly east of Thomas Ogden. Altered conglomerate and felsite were
intersected with associated pyrite and arsenopyrite.
With the presence of strong alteration and
stratigraphy similar to that of TOG and associated anomalous gold values, management is highly
encouraged with the potential of prospective stratigraphy east of TOG.
Holes OG22-047A, 048 and 049 were drilled west of Thomas Ogden (See Fig 1. Ogden DDH
Planmap).
Table of results:
Drill Hole
Meters From
Meters To
Total Meters
Gold (Grams per Ton)
Visible Gold
TOG-22-70
357.44
360.88
3.44
1.96
and
405.48
406.21
0.73
12.70
TOG-22-74A
351.40
366.06
14.66
3.66
yes
including
361.76
366.06
4.30
5.13
yes
OG22-046
142.24
150.00
7.76
0.35
OG22-047A
NSA
OG22-048
NSA
OG22-049
NSA
Drill intercepts are core lengths and true width will be approximately 70 to 80% of drill intercept length.
All data is currently being compiled in preparation for the next drill program.
All split core samples were sent to Activation Laboratories.
The precious metals were analyzed utilizing
a standard fire assay with an atomic absorption finish.
As part of the Corporations QAQC protocol,
approximately 10% of the samples submitted for assay were also sent for check assays.
Standards and
blanks were inserted randomly into the sample shipments as part of the sampling protocol.
Samples with
fire assay results above 1.0 g/t gold are re-analyzed using a gravimetric finish and samples with fire
assay results above 5.0 g/t gold or samples showing visible gold are analyzed using the pulp metallic
method.
Michael MacIsaac, P. Geo and VP Exploration for the Company and a Qualified Person as defined in
National Instrument 43-101, is responsible for this release, and supervised the preparation of the
information forming the basis for this release.
About Metals Creek Resources Corp. -
Metals Creek Resources Corp. is a junior exploration company incorporated under the laws of the
Province of Ontario, is a reporting issuer in Alberta, British Columbia and Ontario, and has its common
shares listed for trading on the Exchange under the symbol "MEK". Metals Creek has earned a 50%
interest in the Ogden Gold Property from Newmont, including the past producing Naybob Gold mine,
located 6 km south of Timmins, Ontario and has an 8 km strike length of the prolific Porcupine-Destor
Fault (P-DF). In addition, Metals Creek has signed an agreement with Newmont, under which Metals
Creek can earn a 100% interest in the past producing Dona Lake Gold Project in the Pickle Lake Mining
District of Ontario.
Additional information concerning the Company is contained in documents filed by the Company with
securities regulators, available under its profile at
www.sedar.com
.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
Alexander (Sandy) Stares, President and CEO
Metals Creek Resources Corp
telephone: (709)-256-6060
fax: (709)-256-6061
www.MetalsCreek.com
Twitter.com/MetalsCreekRes
Facebook.com/MetalsCreek
Fig 1. Ogden DDH Planmap
To view an enhanced version of Figure 1, please visit:
https://images.newsfilecorp.com/files/943/144328_9d25ef4574b6fbc5_002full.jpg
.
Fig 2. Schematic Cross Section 1200W
To view an enhanced version of Figure 2, please visit:
https://images.newsfilecorp.com/files/943/144328_9d25ef4574b6fbc5_003full.jpg
.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/144328