Marimaca Reports Primary Sulphide Intercept of 92m at 2.11% CuT from 140m, including 22m at 5.27% CuT from 204m, within 240m of 1.01% CuT from Surface Combined Oxides and Sulphides
News Release
Marimaca Reports Primary Sulphide Intercept of 92m at 2.11% CuT from 140m, including
22m at 5.27% CuT from 204m, within 240m of 1.01% CuT from Surface Combined Oxides
and Sulphides
Vancouver, British Columbia, December 15, 202 2 – Marimaca Copper Corp. (“Marimaca Copper” or the “Company”)
(TSX: MARI) is pleased to announce results from diamond drill hole MAD-22 which intersected high grade primary sulphide
mineralization down-dip of oxide mineralization at Marimaca Oxide Deposit (“MOD”). Hole MAD-22 is a geological/geotechnical
diamond drill hole which was drilled from the eastern MOD through the eastern 2022 Mineral Resource Estimate (“2022 MRE”)
pit wall and intersected high -grade, dominantly chalcopyrite mineralization. MAD-22 intersected the border of the magnetic
susceptibility high identified in the 2020 geophysical campaign (see press release dated July 14 th, 2020) . This significant
magnetic anomaly beneath the current MOD dips to the east with the same geometry as the interpreted extension of the
structures that host the copper oxide mineralization at the MOD. True widths are unknown at this stage . MAD-22 was drilled
with the objective of gathering geotechnical and geological information of the eastern-pit wall area (Figure 1). A discussion on
the geological interpretation and implications for Marimaca exploration is presented below.
Highlights
• Highlights from reported results are:
o Full drill hole intersection of 240m at 1.01% CuT from surface in two separate zones of oxide and primary sulphide
o Oxide highlights:
▪ 82m at 0.53% CuT from 10m including 50m at 0.80% CuT from 42m
o Sulphide highlights:
▪ 92m at 2.11% CuT from 140m, including
▪ 22m at 5.27% CuT from 204m
• Hole MAD-22 was drilled from inside the 2022 MRE pit area toward and through the eastern border of the MOD at depth
o Consistent with current MRE for the MOD, MAD-22 intersected oxide and mixed mineralization before transitioning
into primary sulphide mineralization
• Primary mineralization is dominated by veins and stringers of massive and semi-massive chalcopyrite within dominantly
magnetite-actinolite alteration consistent with magnetic highs
• The occurrence of primary sulphide mineralization down dip to the east of the MOD is consistent with the current
geological model for Marimaca’s Iron-Oxide-Copper-Gold (“IOCG”)-style copper mineralization
o Mineralization at Marimaca is controlled by a regional scale system of sheeted fractures and dykes, created by a major
extensional event with mineralization introduced along fractures and structural splays
o The MOD’s copper oxides were formed by the oxidation of a chalcocite enrichment blanket derived from original
primary sulphides
• Results from MAD-22 will be reviewed and the Company will provide an update to the market on next steps to follow up
the results in due course
• In parallel the Company will continue to progress permitting and engineering workstreams to support the planned
Definitive Feasibility Study “DFS” on the Marimaca Oxide Project planned for the second half of 2023
Sergio Rivera, VP Exploration of Marimaca Copper, commented:
“The sulphide potential at Marimaca has always presented a compelling exploration opportunity for the Company. The size of
the oxide resource base at the MOD, as demonstrated in the 2022 Mineral Resource Estimate, is a testament to the scale of the
mineralizing system and hole MAD-22 provides exciting evidence for potential extensions of sulphide feeder zones down -dip of
Marimaca’s oxide blanket.
“While previous drilling into the down -dip geophysical targets identified in 2020 and 2021 intersec ted additional mixed and
secondary sulphides at depth (MAMIX), MAD-22 represents the first significant primary sulphide intersection to date and could
represent a primary high grade feeder structure as interpreted in our geological model for the deposit.
“With the 2022 drill program now completed, results from MAD-22 will be considered in our exploration planning going forward.
We look forward to updating the market as our interpretation and plans for additional exploration work are finalized.
“In parallel and as discussed in previous releases, we will continue with our de-risking strategy at the MOD with the objective of
delivering an updated MRE in early 2023, capturing the second half of the 2022 infill program. This will form the basis for t he
DFS on the Marimaca Oxide Deposit planned for the second half of 2023 or early 2024.”
Marimaca’s 2022 Drilling Campaign
Marimaca’s 2022 drilling campaign consist ed of over 41,500m of RC and diamond drilling between the MOD infill and the
MAMIX zone, the depth extension of the MOD. The 2022 MRE, announced on October 13, 2022 incorporates 19,580m of the
approximate 28,374m of drilling completed in 2022 for a total of over 110,000m of drilling completed since 2016 at the MOD.
The balance of the 2022 infill drilling program will be included in a subsequent MRE planned for early 2023 with the objective
of converting the remaining Inferred Resources to the Measured and Indicated Categories to underpin a Definitive Feasibility
Study (“DFS”) planned for later in 2023.
Results Discussion
The Marimaca Copper Deposit is an Iron-Oxide Copper Gold (“IOCG”) with a medium to high level of exposure. It comprises a
dominant structural feature of broad areas of sheeted dykes and fracture zones, oriented north/north -east and dipping 45-60
degrees to the east . These structure s host oxide and mixed copper mineralization down to vertical depths of ~500m .The
north/north-east dip is believed to be the result of a post-mineral tilting event, which would indicate the potential for primary
mineralization east of the MOD, down dip of the oxide blanket (Figure 2).
A strong relationship between chalcopyrite and magnetite is observed throughout the deposit area. The Company has
completed magnetic susceptibility work on over 69,582 samples representing 139,163 m of available drilling. The results, which
have been analysed on the basis of rock types as well as mineral sub -zones across the Marimaca deposit, and are shown in
Figure 3, present the average magnetic susceptibility (and a two standard deviation range) for each mineralogy. It shows a clear
correlation of high -magnetic susceptibility in the zones with primary sulphide and the feeder zones associated with this
mineralization relative to the oxide zones (Figures 2 and 3). MAD -22’s results provide strong support for the relationship
between primary copper mineralization and magnetic susceptibility associated with magnetite abundance typical of IOCG-style
mineralisation.
Figure 1: EW Cross Section 7,435,550-N Looking North
Figure 2: 3D MIV Model - MOD and Magnetic Inversion Model Demonstrating Copper Sulphide Potential (Looking
Northeast)
Figure 3: Mean Magnetic Susceptibility per Sample Dominant Mineralogy with 95% Confidence Interval
Table 1. Summary of Drill Results
Hole Depth (m) From (m) To (m) m %CuT
MAD-22 240
0 240 240 1.01%
including 10 92 82 0.53%
Including 42 92 50 0.80%
and 112 232 120 1.65%
including 140 232 92 2.11%
including 178 232 54 2.80%
Including 204 226 22 5.27%
Including 214 224 10 8.10%
Table 2. Drill Collar and Survey
Hole Easting Northing Elevation Azimuth Inclination Depth
MAD-22 375143,8 7435536,2 1124,9 85 -55 240
Sampling and Assay Protocol
True widths cannot be determined with the information available at this time. RC holes were sampled on a 2m continuous
basis, with dry samples riffle split on site and one quarter sent to the Andes Analytical Assay preparation laboratory in Calama
and the pulps then sent to the same company laboratory in Santiago for assaying. A second quarter was stored on site for
reference. Samples were prepared using the following standard protocol: drying; crushing to better than 85% passing -10#;
homogenizing; splitting; pulverizing a 500-700g subsample to 95% passing -150#; and a 125g split of this sent for assaying. All
samples were assayed for %CuT (total copper) and %CuS (acid soluble copper) by AAS. A full QA/QC program, involving insertion
of appropriate blanks, standards and duplicates was employed with acceptable results. Pulps and sample rejects are stored by
Marimaca Copper for future reference.
Qualified Person
The technical information in this news release, including the information that relates to geology, drilling and mineralization was
prepared under the supervision of, or has been reviewed by Sergio Rivera, VP Exploration, Marimaca Copper Corp, a geologist
with more than 35 years of experience and a member of the Colegio de Geólogos de Chile and of the Society of Economic
Geologist USA, and who is the Qualified Person for the purposes of NI 43 -101 responsible for the design and execution of the
drilling program.
The QP confirms she has visited the project area, has reviewed relevant project information, is responsible for the information
contained in this news release, and consents to its publication.
Contact Information
For further information please visit www.marimaca.com or contact:
Tavistock
+44 (0) 207 920 3150
Emily Moss / Adam Baynes
Forward Looking Statements
This news release includes certain “forward-looking statements” under applicable Canadian securities legislation. There can be
no assurance that such statements will prove to be accurate, and actual results and future events could differ materially fro m
those anticipated in such statements. Forward-looking statements reflect the beliefs, opinions and projections on the date the
statements are made and are based upon a number of assumptions and estimates that, while considered reasonable by
Marimaca Copper, are inherently subject to significant business, economic, competitive, political and social uncertainties and
contingencies. Many factors, both known and unknown, could cause actual results, performance or achievements to be
materially different from the results, performance or achievements that are or may be expressed or implied by such forward -
looking statements and the parties have made assumptions and estimates based on or related to many of these factors. Such
factors include, without limitation: risks related to share price and market conditions, the inherent risks involved in the mining,
exploration and development of mineral properties, the uncertainties involved in interpreting drilling results and other
geological data, fluctuating metal prices, the possibility of project delays or cost overruns or unanticipated excessive operating
costs and expenses, uncertainties related to the necessity of financing, the availability of and costs of financing needed in the
future as well as those factors disclosed in the annual information form of the Company dated March 2 8, 2022, the final short
form base prospectus and other filings made by the Company with the Canadian securities regulatory authorities (which may
be viewed at www.sedar.com). Accordingly, readers should not place undue reliance on forward-looking statements. Marimaca
Copper undertakes no obligation to update publicly or otherwise revise any forward -looking statements contained herein
whether as a result of new information or future events or otherwise, except as may be required by law.
Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for
the adequacy or accuracy of this release.