Marimaca Copper Receives Environmental Approval for Upcoming Drilling Program
News Release
Marimaca Copper Receives Environmental Approval for Upcoming Drilling Program
Vancouver, British Columbia, November 5, 2020 – Marimaca Copper Corp. (“Marimaca Copper” or the “Company”)
(TSX: MARI) is pleased to announce that the Antofagasta Environmental Evaluation Commission has approved, by a
majority vote, the Company’s new exploration campaigns, which will encompass further drilling at the Marimaca Oxide
Deposit (“MOD”), exploration drilling at the Marimaca Sulphide Target and in the broader Marimaca District.
Highlights
• Approval for new exploration programs received from regional environmental authority
• Marimaca Copper successfully completed the Declaración de Impacto Ambiental (“DIA”) process, which is expected
to be a similar process for the environmental approvals for the eventual development of the Marimaca Oxide
Deposit
o Baseline studies were completed to analyse flora and fauna and potential environmental impacts of the project
• Approvals granted for the construction of up to 365 drill pads (“platforms”) over the next three years
o Approvals encompass 3,800 hectares of highly prospective ground including the recently defined district targets
around the Marimaca Project as well as the Marimaca Sulphide Target
• Awaiting receipt of the final Resolution de Calificación Ambiental (“RCA”) from the Environmental Assessment
Service (“SEA”), which is expected within the next 10 days
• Exploration work underway to further refine targets for the upcoming drilling campaigns which are expected to
commence in Q1 2021.
Hayden Locke, President of Marimaca Copper commented:
“As we move to the next phase of our development, with a n increased focus on exploration, our team has completed the
environmental impact assessment process where extensive baseline environmental work was completed, in line with the
strict environmental assessment procedures in Chile. We are pleased to announce that we now have the approvals required
to commence our next phase of aggressive exploration work, which will focus on the Marimaca Sulphide Target, as well as
the several, recently defined, large scale targets to the north of the Marimaca Oxide Deposit.
“We are currently completing Induced Polarization and downhole magnetic surveys over the Marimaca Sulphide Target,
which will allow us to further refine our drill hole targeting. In addition, we have commenced surface geological work at
the regional targets, to the north of the Marimaca Oxide Project, which we believe will generate several high priority oxide
drill targets for scout drilling in early 2021.
“2021 is going to be an exciting year in our development as we hope to make another significant copper discovery to
complement the unique Marimaca Oxide Deposit, which boasts industry leading capital c osts and bottom quartile all -in-
sustaining cash operating costs.”
DIA Approval
The Company undertook a rigorous environmental baseline study, which included flora and fauna studies and indicated
no red flags for the project’s exploration to move ahead. In addition, archeological baseline studies have been completed
and no relevant archeological findings were made, which the Company believes will reduce complexity in future permitting
programs.
The area approved by the DIA covers a footprint of 3,800 hectares and includes the MOD, the Marimaca Sulphide Target
and all of the new targets generated to the north of Marimaca.
Exploration work at the MOD will include an infill drilling campaign to convert the Inferred resources into Measured and
Indicated, ahead of the execution of a Pre-Feasibility Study or Feasibility Study. The Company’s current plan is to complete
the infill drilling in 2021, after conditions improve related to the Covid-19.
The Company will look to commence drilling on the exciting new targets identified through recent magnetic surveys as a
matter of priority.
Overview of Exploration Work Programs Underway
MARIMACA SULPHIDE TARGET – INDUCED POLARIZATION
The results from the high resolution, drone mounted, magnetic survey (please refer to the Company’s press release dated
14 July 2020) identified a significant magnetic anomaly beneath the current Marimaca Oxide Deposit (“MOD”), which dips
to the east with the same geometry as the interpreted extension of the surface structures that host the copper
mineralization at Marimaca. The strong correlation of the magnetic response and the primary sulphide bearing mineralized
zones (mainly chalcopyrite), which was identified during the magnetic susceptibility testing of drill samples from Marimaca,
provides a clear indication of a major copper sulphide target.
Figure 1: Cross Section N 7.435.800 with Interpreted Sulphide Zone, Previously Completed Sulphide
Drill Results and Vector Inversion Magnetic Anomaly > 0.03 SI
The Company has commenced an Induced Polarization (“IP”) Survey at the Marimaca Sulphide Target to help further refine
drill hole location and orie ntations to test this exciting opportunity. These surveys highlight areas of higher sulphide
content and help to identify priority zones, within the larger anomaly.
Figure 2: Map of Planned IP Lines at Marimaca Sulphide Target
The Company is also completing downhole magnetic susceptibility measurements, which will provide greater detail with
respect to the magnetic anomaly within the Marimaca Sulphide Target. This can provide valuable information around
structures which may be important for mineralization at depth.
DISTRICT TARGETS – SURFACE GEOLOGY
North of the Marimaca Oxide Deposit, the district scale 7.5km by 5km magnetics survey (please refer to the Company’s
press release dated 23 September 2020) identified several targets which are prospective Marimaca style deposits. The
initial focus will be on the Mercedes and Cindy targets, which have noticeable similarities with Marimaca including spatial
relationship of the magnetic anomalies with the important Naguayan Fault, the orientation and dip of the magnetic
anomalies as well as their proximity to historic artisanal copper workings hosting oxide and sulphide copper mineralization.
Marimaca’s geological team is currently completing a range of work including geochemical sampling on a 50m by 50m grid
and 1:1,000 geological mapping, which will provide more granular detail of the key geological features across these targets.
The Company believes this work will generate high priority oxide drill targets for scout drilling in the first half of 2021.
The Company will then move the IP survey teams north to Mercedes and Cindy to refine drill targets for the deepe r
magnetic anomalies, which the Company believes are prospective, large scale, copper sulphide targets.
Figure 3: Map Showing Areas for Surface Geological Work
Qualified Person
The technical information in this news release, including the information that relates to geology, drilling and mineralization
was prepared under the supervision of, or has been reviewed by Sergio Rivera, Vice President of Exploration, Marimaca
Copper Corp, a geologist with more than 36 years of experience and a member of the Colegio de Geólogos de Chile and of
the Institute of Mining Engineers of Chile, and who is the Qualified Person for the purposes of NI 43 -101 responsible for
the design and execution of the drilling program.
Mr Rivera confirms that he has visited the Marimaca Project on numerous occasions, is responsible for the information
contained in this news release and consents to its publication.
Contact Information
For further information please visit www.marimaca.com or contact:
Tavistock
+44 (0) 207 920 3150
Jos Simson/Emily Moss
Forward Looking Statements
This news release includes certain “forward-looking statements” under applicable Canadian securities legislation. These
statements relate to future events or the Company’s future performance, business prospects or opportunities. Forward -
looking statements include, but are not limited to, the impact of a rebranding of the Company, the future develop ment
and exploration potential of the Marimaca Project. Actual future results may differ materially. There can be no assurance
that such statements will prove to be accurate, and actual results and future events could differ materially from those
anticipated in such statements. Forward-looking statements reflect the beliefs, opinions and projections on the date the
statements are made and are based upon a number of assumptions and estimates that, while considered reasonable by
Marimaca Copper, are inherently subject to significant business, economic, competitive, political and social uncertainties
and contingencies. Many factors, both known and unknown, could cause actual results, performance or achievements to
be materially different from the results, perfo rmance or achievements that are or may be expressed or implied by such
forward-looking statements and the parties have made assumptions and estimates based on or related to many of these
factors. Such factors include, without limitation: risks related to s hare price and market conditions, the inherent risks
involved in the mining, exploration and development of mineral properties, the uncertainties involved in interpreting
drilling results and other geological data, fluctuating metal prices, the possibility of project delays or cost overruns or
unanticipated excessive operating costs and expenses, uncertainties related to the necessity of financing, the availability
of and costs of financing needed in the future as well as those factors disclosed in the Comp any’s documents filed from
time to time with the securities regulators in the Provinces of British Columbia, Alberta, Saskatchewan, Manitoba, Ontario,
New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland and Labrador. Accordingly, readers should not place
undue reliance on forward-looking statements. Marimaca Copper undertakes no obligation to update publicly or otherwise
revise any forward -looking statements contained herein whether as a result of new information or future events or
otherwise, except as may be required by law.