Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

LPK.V ·

Lupaka Reports 10.69 g/t Au-Eq. Along Strike Length of 65 m from Extension on 3430 Sublevel at Invicta; On-Vein Development Extended by 105 m

Drill Results

Lupaka Reports 10.69 g/t Au-Eq. Along Strike Length of 65 m

from Extension on 3430 Sublevel at Invicta; On-Vein

Development Extended by 105 m

TORONTO, ONTARIO, September 18, 2018 -- Lupaka Gold Corp. ("Lupaka Gold" or the

“Company") (TSX-V: LPK, FRA: LQP) is pleased to announce results from the ongoing

systematic underground channel sampling program from the new development headings

on the 3400 Level and 34 30 sublevel, at the Company’s 100% owned Invicta Gold

Development Project (“Invicta”).

Highlights:

• 3430 sublevel - Development and channel sampling of the Atenea vein has

been extended by 105 metres (“m”) along strike to the west and northeast ;

Average channel sample grade of 9.06 grams per tonne (“g/t”) gold

equivalent* (“Au-Eq.”) over a strike length of 235 m, with an average sample

width of 3.87 m

• Low-grade mineralized zone on the 3430 sublevel, designed as a pillar in the

mine plan, is only 35 m in length versus a n estimate of 44 m in the block

model, followed by a new interval to the northeast of 10.69 g/t Au-Eq. along a

strike length of 65 m, with an average width of 3.50 m

• 3400 Level - Development and channel sampling of the Atenea vein has been

extended by 70 m along strike to the west and northeast; Average channel

sample grade of 9.04 g/t Au-Eq over a strike length of 200 m, with an average

sample width of 4.88 m

• The average grade s returned from the Atenea vein channel sampling

program, on both development levels, continue to be higher tha n the

estimated grade of 8.58 g/t Au -Eq.** included in the Preliminary Economic

Assessment (“PEA”) mine plan, and confirm the high-grade continuity of the

Atenea vein

* Au-Eq. calculations are based on US$1250 for gold (“Au”), US$17.00 for silver (“Ag”), US$3.00 for copper (“Cu”), US$1.25

for zinc (“Zn”), and US$1.05 for lead (“Pb”), with assumed metallurgical recoveries of 85% for Au, 80% for Ag, 82 % for Cu

and Pb, and 77% for Zn.

**Individual estimated grades were 5.54 g/t Au, 44.34 g/t Ag, 0.87% Cu, 0.76% Pb, and 1.02% Zn

“Our underground development program, and associated channel sampling assay

results, continue to demonstrate continuity of the high-grade mineralization at

Invicta. Since initiating the underground program only a few months ago, w e have

been able to extend the on-strike development by 105 m on the 3430 sublevel to over

235 m, and 70 m on the 3400 Level to over 200 m, while exceedi ng the grades

estimated from the Mineral Resource block model . We are highly encouraged by

these results and plan on incorporating this data into our geological model while

attempting to expand the mineral resources at Invicta.”

Will Ansley, CEO and President of Lupaka Gold

Underground Development and Channel Sample Results

The Invicta underground exploration & development channel sampling program continues

along the 3430 sublevel and 3400 Level (see plans - Appendix A & B) with the purpose of

further defining the grade and horizontal limits of the Atenea vein. Drifts, 3.5 m wide by 3.5

m high, are being driven along the vein to the west and northeast, and channel samples

are being systematically cut every 5 m along strike.

On the 3430 sublevel, an additional 105 m of on-vein development has been completed to

the west and northeast on the Atenea vein. The total development on-strike has been

extended by 80% and now averages 9.06 grams per tonne g/t Au -Eq. over a strike

length of 235 m, with an average sample width of 3.87 m. As anticipated, a low-grade

mineralized zone was intersected, which is designed as a pillar in the mine plan, however

the length of the low -grade section is only 35 m compared to an estimate of 44 m .

Northeast of the planned low-grade pillar, the vein was extended a further 65 m along

strike with channel sampling returning 10.69 g/t Au-Eq. over an average width of 3.50

m. While th e vein extension was expected, the grades encountered were higher than

estimated in the Mineral Resource Model . Drifting along the vein on the 3430 sublevel

continues in both directions to the west and northeast, with additional cross -cuts being

planned in order to confirm the true width of the mineralization.

On the 3400 Level, development drifting has extended the footwall vein approximately 57

m to the west , while to the northeast an additional 33 m of development has been

completed along the Atenea vein , ending in the low -grade pillar zone which extends

upwards to the 3430 sublevel. Additional drift advancement is continuing in order to confirm

continuity of the mineralization between the 3400 Level and the 3430 sublevel.

The width of the Atenea vein has not been fully exposed and sampled on the development

levels due to the constrained width of the development headings (3.5 m wide) . Future

development, including cross -cuts, slashing, and bazooka drilling, will be used to fully

expose the true width of the vein on each development level.

The polymetallic mineralization within the Atenea vein is hosted by structures which were

mapped and sampled. Assay channel sample results for the 3430 sublevel are summarized

in Table 1, and a detailed sampling map is provided in Appendix A.

Table 1: Average Sampling Results from 3430 sublevel Atenea Vein

Atenea Vein Length

m

Width

m

Au

g/t

Ag

g/t

Cu

%

Pb

%

Zn

%

Au-Eq.

g/t

SW Major interval 170.0 4.24 3.97 56.86 1.55 1.16 1.07 8.44

NE Interval 65.0 3.50 5.35 59.50 1.55 1.83 1.82 10.69

TOTAL 235.0 3.87 4.35 57.59 1.55 1.34 1.28 9.06

Summarized channel sample assay results for the 3400 Level are presented in Table 2,

and a detailed sampling map is provided in Appendix B.

Table 2: Average Sampling Results from 3400 Level Atenea Vein

Atenea Vein Length

m

Width

m

Au

g/t

Ag

g/t

Cu

%

Pb

%

Zn

%

Au-Eq.

g/t

Footwall Vein 200.0 4.88 4.77 62.16 1.43 1.13 0.94 9.04

Hanging Wall Split 70.0 5.98 2.74 62.18 1.33 1.52 0.86 7.00

Neither the TSX Venture Exchange nor its Regulation Service Provider (as the term

is defined in the policies of the TSX Venture Exchange) accepts responsibility for

the adequacy of this news release.

Quality Control and Assurance

The analyses for the channel sampling campaign were carried out by ALS, an accredited

laboratory, in Lima, Peru, exercising a thorough Qual ity Assurance and Control program

(QA/QC). As part of QA/QC protocol, duplicates, standards and blanks were inserted into

the sample processing stream. The sample locations were mapped, surveyed and

photographed for reference. Individual sample channels va ry between 0.2 to 2.5 meters

wide. Samples were bagged, sealed and delivered to the ALS sample preparation facility

in Lima, Peru. Gold was assayed by a 50-gram fire assay and re-assayed for the overlimits,

with an AAS finish. All ALS labs are ISO 9000 registered.

About Lupaka Gold Corp.

Lupaka Gold is an active Canadian-based company focused on creating shareholder value

through discoveries and strategic development of its assets in some of the most prolific

mining regions of Peru.

Invicta Gold Development Project – Lupaka Gold’s 100% owned flagship project is an

advanced stage gold-copper dominated, polymetallic underground project located

approximately 120 kilometres north of Lima. Over $15 million of capital was spent by the

previous owners on development and infrastructure at Invicta. Lupaka Gold’s management

expects to commence production in the second half of 2018 using third -party mining

contractors and utilizing the previous and ongoing vein development. The Invicta project is

awaiting inspection for the final exploitation permit and has community agreements in

place.

The underground operation of the Atenea vein will be focused initially on the extraction of

about 80,000 tonnes (“t”) of Indicated Mineral Resources exposed on the 3400 Level and

3430 sublevel as well as the mining relief slot between the two levels, and the Inferred

Mineral Resources within close proximity of the existing 3400 Level adit (up to 130 metres

above the 3400 Level).

Invicta’s approved EIA allows for mine production of up to 1,000 tpd, although the current

conceptual mining plan is scheduling to commence at 350 tpd.

Cautionary Note Regarding the Invicta Production Decision

The PEA is preliminary in nature and includes inferred mineral resources that are

considered too speculative geologically to have economic considerations applied to them

that would enable them to be categorized as mineral reserves . There is no certainty that

the PEA results will be realized. Mineral resources that are not mineral reserves do not

have demonstrated economic viability. The quantity and grade of reported inferred

resources referred to in the PEA are uncertain in nature and there has been insufficient

exploration to define these inferred r esources as an indicated or measured mineral

resource category.

It is important to note while a mine production decision has been made by the Company,

that the information provided in this news release is preliminary in nature. There is no

certainty that a potential mine will be realized. The PEA is not a preliminary feasibility

study or feasibility study. A mine production decision that is not based on a feasibility

study demonstrating economic and technical viability does not provide adequate disclosure

of the increased uncertainty and specific economic and technical risks of failure associated

with such a production decision.

FOR FURTHER INFORMATION PLEASE CONTACT:

Will Ansley, President & C.E.O.

[email protected]

Tel: (416) 862-5257

or visit the Company’s profile at www.sedar.com or its website at www.lupakagold.com

Qualified Person

The technical information in this document has been reviewed and approved by Julio

Castañeda Mondragon, MAIG, the President of Lupaka Gold Peru S.A.C. , a Peruvian

subsidiary of the Company, and a Qualified Person as defined by National Instrument 43-

101. Mr. Castañeda has verified the scientific and technical information, including sampling,

analytical and test data underlying the information or opinions contained in this news

release.

Cautionary Statements Regarding Forward Looking Information

This press release contains forward -looking statements which constitute "forward -looking

information" within the meaning of applicable securities laws, including all statements, trend analysis

and other information relative to anticipated future events or results. Al l statements, other than

statements of historical fact, included her ein are considered forward-looking statements, including,

without limitation, statements relating to: the continued development of the 3400 Level and 3430

Sublevel, additional sampling and the anticipated timing and results thereof; and an updated

resource estimate for the Invicta Gold Development Project and the timing and results thereof .

Forward-looking statements are based on assumptions, estimates and opinions of management at

the dat e the statements are made and which the Company believes are reasonable. Such

information involves risks and uncertainties, and undue reliance should not be placed on such

information, as unknown or unpredictable factors could have material adverse effects on future

results, performance or achievements of the Company. Among the key factors that could cause

actual results to differ materially from those projected in the forward -looking information are the

following: that the repayment of the PLI Financing i s consummated on the anticipated terms; that

the Company will not experience any material accident, labour dispute, shortage of skilled and

professional staff, changes in project plans, equipment availability and failures, process failures, the

ability of third party service providers to deliver services on reasonable terms and in a timely manner;

future exploration activities planned at the Invicta Gold Project, and the timing and results thereof;

market conditions and general business, economic, competit ive, political and social conditions and

with respect to the planned mining operations at Invicta; that pre-production mine development can

be completed in the time and for the cost projected; that the Company will be able to obtain funding

for planned pro duction expenses; that mineralization at Invicta will be of the grades and in the

locations expected; that the Company will be able to extract and transport mineralized rock efficiently

and sell the mineralized rock at the prices and in the manner recoveri es and quantities expected;

that permits will be received on the terms and timeline expected and that other regulatory or

permitting issues will not arise; that mining methods and reclamation can be employed in the manner

and at the costs expected and that such methods yield the results the Company expects them to.

Forward-looking information involves known and unknown risks, uncertainties and other factors

which may cause the actual results, performance or achievements of the Company to be materially

different from any future results, performance or achievements expressed or implied by the forward-

looking information. Such risks, uncertainties and other factors include, among others: all of the

risks described in this news release; that the Company will no t be able to comply with the delivery

or other obligations in the PLI Financing Agreement and the risk that PLI will enforce its security

over the Company’s assets, including its mineral properties; s; changes in commodity prices;

currency exchange rates ( such as the Canadian dollar versus the United States dollar); risks

associated with dilution; labour and employment matters; risks in the event of a potential conflict of

interest; changes in general economic, business and political conditions, including changes in the

financial markets; changes in applicable laws; a nd compliance with extensive government

regulation; and other risks generally associated with mineral exploration. This forward -looking

information may be affected by risks and uncertainties in the regular course of business and due to

market conditions. Additional risks are described in the Company’s annual information form, which

is available on SEDAR at www.sedar.com.

Although the Company has attempted to identify important factors that could cause actual actions,

events or results to differ materially from those described in forward-looking information, there may

be other factors that cause actions, events or results to not be as anticipated, estimated or intended.

There can be no assurance that forward -looking information will prove to be accurate, as actual

results and future events could differ materially from those anticipated in such statements. Readers

are cautioned not to place undue reliance on forward -looking information due to the inherent

uncertainty thereof. Lupaka Gold does not undertake an y obligation to update forward -looking

statements except as required by applicable securities laws. Investors should not place undue

reliance on forward-looking statements.

Appendix A

Appendix B