Lion One Drilling Extends Deep Feeder Zone 500 to 1,150m at Tuvatu Alkaline Gold Project in Fiji
Lion One Drilling Extends Deep Feeder Zone
500 to 1,150m at Tuvatu Alkaline Gold Project
in Fiji
North Vancouver, British Columbia--(Newsfile Corp. - April 8, 2022) -
Lion One Metals Limited
(TSXV:
LIO) (OTCQX: LOMLF) (ASX: LLO)
("Lion One" or the "Company")
is pleased to report that ongoing
drilling has returned multiple high grade intercepts, significantly extended the drill-confirmed vertical
extent of Deep Feeder Zone 500, and further confirmed the alkaline deposit model and depth potential
of the Tuvatu Alkaline Gold Project in Fiji.
Extending Deep Feeder Zone 500
The latest drilling at Tuvatu extends Deep Feeder Zone 500 approximately 300 meters below the base
of the current resource, with two further holes intersecting high grade mineralization an additional 350m
deeper, demonstrating vertical continuity of the Tuvatu gold system of at least 1,150m. The recent drilling
comprised 11 drill holes for 9113.4 meters of drilling. (See Figure 1)
Top Intercepts (See Table 1 for High Grade Highlights and Table 2 for Significant Intercepts)
23.14 g/t Au over 3.00m
inc.
118.60 g/t Au over 0.30m
from 571.50m (TUG 138)
25.83 g/t Au over 2.70m
inc.
43.64 g/t Au over 0.30m
from 582.50m (TUDDH 573W1)
87.83 g/t Au over 1.50m
inc
. 108.41 g/t Au over 0.60m
from 445.10m
(TUG 136)
Further Confirmation of Alkaline Gold System Model
This deep extensional drilling not only demonstrates exceptional grades at depth but further confirms the
potential for a deep-rooted gold bearing alkaline gold system like the example at the nearby Vatukoula
gold system in Fiji where historical gold production exceeds 7 million ounces and exploration (and gold
production) is ongoing.
Potential for Substantial Resource Increase
Sergio Cattalani, Lion One's Senior Vice President Exploration, commented "With the completion of the
re-entry hole TUDDH-494, high-grade mineralization in the deep feeder Zone 500 has now been
demonstrated to extend for over 650 meters vertically below the base of the current resource.
Within this
interval, bonanza grades over realistic mining widths have been confirmed and modelled as multiple
sub-parallel to locally interconnected lodes with highest grades forming a steeply (approximately -80°)
NE-plunging shoot of about 200m wide, by about 90m thick, and approximately 300m vertically below
the overlying resource.
While this upper 300m portion of the feeder zone alone should add significantly to
the overall resource at Tuvatu, the lower 350m remains essentially undrilled.
Table 1: High Grade Highlights from Latest Zone 500 Drilling
TUG-136
10.14 g/t Au over 3.0m
from 429.10m
inc.
34.56 g/t Au
over 0.30m from 429.40m
and
20.13 g/t Au
over 0.60m from 431.50m
87.83 g/t Au over 1.50m
from 445.10m
inc.
108.41 g/t Au
over 0.60m from 445.10m
inc.
176.50 g/t Au
over 0.30m from 445.40m
and
222.00 g/t Au
over 0.30m from 446.30m
TUG-138
15.21 g/t Au
over 0.60m from 541.5m
inc.
26.45 g/t Au
over 0.30m from 541.50m
114.80 g/t Au
over 0.30m from 561.00m
23.14 g/t Au over 3.0m
from 571.50m
inc.
118.60 g/t Au
over 0.30m from 571.50m
and
51.43 g/t Au
over 0.30m from 572.40m
and
49.72 g/t Au
over 0.30m from 573.00m
TUDDH-573W1
25.83 g/t Au over 2.70m
from 582.50m
inc.
43.64 g/t Au
over 0.30m from 582.50m
and
9.62 g/t Au
over 0.30m from 583.10m
and
33.77 g/t Au over 1.50m
from 583.40m
TUDDH-494 re-entry
12.19 g/t Au
over 0.30m from 1,106.30m
Deep Feeder Zone 500 Discovery
Results of 11 drill holes (totalling 9113.4m) are reported here in Table 2; corresponding collar
coordinates for previously unreported holes are included in Table 3.
These results follow previously
reported drilling that totaled 17 drill holes, that had partially defined the presence of a deep high-grade
feeder structure, beginning with the discovery by hole TUDDH500 announced in July, 2020 (see
Lion
One Drills High-Grade Feeder Mineralization in Diamond Drill Hole TUDDH500 - Lion One Metals
).
Discovery hole TUDDH500 and two subsequent wedge holes drilled into the mineralized structure at a
low angle to its strike returned outstanding results, including 12.7 m at 55.43 g/t Au from 571.0 m depth,
including 4.7 m at 144.81 g/t Au in hole TUDDH500; 3.3 m of 85.70 g/t Au from 591.6 m depth, including
0.3 m at 305 g/t Au and 0.3 m at 310 g/t Au in TUDDH500W1; and 6.5 m at 7.32 g/t Au from 674.0 m
depth, including 0.5 m at 67.40 g/t Au in TUDDH500W2.
Subsequent drilling was re-oriented to intersect
the mineralized structure at higher angles of incidence yielding more realistic thicknesses of individual
lodes (for example: 2.30 m at 55.44 g/t Au from 575.7 m depth, including 1.32 m at 96.13 g/t Au in
TUDDH533; 1.80 m at 34.8 g/t Au at 629.3 m depth, and 2.40 m at 24.31 g/t Au from 632.3 m depth, in
hole TUDDH544W2; 3.47 m at 20.71 g/t from 703.7 m depth, including 0.23 m at 294.5 g/t Au in
TUDDH514).
Drill testing across the strike direction of the mineralized structure has also led to the
discovery and subsequent testing of additional sub-parallel structures.
Ongoing deep drill program is designed to systematically test the strike extent, and down-dip continuity
of the high-grade mineralized structure, as well as to test for the presence of additional sub-parallel
mineralized lodes.
The program also included several aggressive step-out drill holes along strike
(TUDDH561 and 571, for example), and down dip (TUDDH573W1, and TUDDH494 re-entry).
Where
feasible, re-entry of pre-existing drill holes allowed for testing of the structure while saving on total drill
meterage (TUDDH525, and 494 re-entry).
Zone 500 Orientation and Geometry
Results to date have indicated that the mineralized high-grade feeder zone consists of at least 4
principal vein arrays striking between N020° and N030°, corresponding in orientation to UR2 And UR4
lodes in the orebody above.
These 4 structures are shown as separate lodes in Figure 1.
A well-
developed cross-structure oriented at about N055° forms a linking structure to these lodes, with the
intersection lineation forming a steeply NE-plunging mineralized shoot that is about 200 m wide,
occurring over a total thickness of approximately 90 m, and is continuously mineralized for a minimum of
300 m down plunge.
Two isolated drill intercepts directly down-plunge from the highly mineralized shoot
have returned 10.5 g/t Au and 12.2 g/t Au, from holes TUDDH514 and TUDDH494 respectively,
suggesting that the mineralized structure may extend for at least an additional 350 m for a total
mineralized zone that appears to extend up to 650 m below the base of the current inferred resource
(Figure 2). In accordance with one of the well-documented, and defining characteristics of large alkaline
Au system (e.g. Cripple Creek, Colorado), this corresponds to at least 1150 m of near-continuous
vertical high-grade Au mineralization.
Additionally, the strike extent is not closed to the NE as drill hole
TUDDH571 intersected 12.5 g/t Au at 482.1 m downhole which is directly on strike to one of the
modelled 500 Zone lodes (Figure 2).
The lower 350 m currently remains essentially undrilled with the exception of two intercepts of 10.5 g/t Au
from TUDDH514 and 12.2 g/t Au from TUDDH494 re-entry at approximately 1120 m vertically below
surface.
The latter intercept, which represents the deepest documented mineralized intercept to date at
Tuvatu, occurs in a strongly altered monzonite and exhibits the coexistence of native gold and bornite
(Figure 3). Additional observations of visible gold and bornite mineralization from even deeper in hole
TUDDH494 have been made at 1185 m and 1192 m downhole depths although final assay results for
these samples are still pending.
Mineralized intercepts at 1106 m and 1192 m downhole depths in TUDDH494 re-entry hole, exhibit co-
existence of visible gold, bornite, chalcopyrite and magnetite, developed in association with discrete
bands to irregular anastomosing zones of pervasively developed epidote-orthoclase-magnetite-biotite-
actinolite? alteration in monzonite.
Multiple occurrences of minor (<<1%) chalcopyrite and bornite without
visible gold have also been documented to at least 1285 m downhole depth in TUDDH494.
Although
observations are still very preliminary in extent, if confirmed by additional drilling, the mineral
assemblage described above suggests that the high-grade 500 Zone feeder may be rooted in a
monzonite stock that is altered by a high-temperature magmatic-hydrothermal potassic to calc-potassic
assemblage mineralized in both Au and Cu (Figure 3).
Possible analogues to such mineralization
include Newcrest's Ridgeway Au-Cu deposit in the Cadia Intrusive Complex, NSW, Australia, and
Centerra's Mt. Milligan Au-Cu deposit, BC, Canada.
Figure 3:
Photographs of the deep intercept from drill hole TUDDH494 at 1106 m depth that returned
12.2 g/t Au and 0.39% Cu hosted in a pervasively altered monzonite exhibiting an assemblage of
epidote-actinolite?-orthoclase-biotite-magnetite-bornite and native gold forming an irregular band at low-
angle to core axis.
To view an enhanced version of Figure 3, please visit:
https://orders.newsfilecorp.com/files/2178/119791_lion.h2.jpg
Figure 1:
Leapfrog generated vertical section looking N showing the outline of current Indicated and
Inferred resource for the Tuvatu Au deposit, Fiji. The 500 Zone feeder is illustrated as 4 separate
veins/lodes extending for about 300m from the base of the Inferred resource. Red, blue and green lodes
trend between N020° and N030°, and are sub-parallel to existing UR2 and UR4 lodes; yellow mesh is
oriented approximately N060° and is a linking structure between other lodes. Deeper drill intercepts from
holes TUDDH514 and TUDDH494 are also projected onto the section.
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/2178/119791_43b6e663c4637835_004full.jpg
Figure 2
: Schematic longitudinal section showing all pierce points defining the 500 Zone mineralized
feeder. Intercepts occur over an approximate 90m thickness but are projected onto the section for
illustrative purposes. Yellow dots represent significant mineralization; green dots represent holes that did
not intersect significant mineralization at depths represented by this section. Light pink dots are historic
drill holes that define a portion of the Inferred resource, the base of which is illustrated by the blue dashed
line. The mineralized zone forms an approximately 200m-wide by 90m thick zone that plunges steeply to
the NE at approximately -80°. The possible continuity of the zone at depth is suggested by two deep
intercepts in holes TUDDH514 and TUDDH494, that returned 10.5 and 12.2 g/t Au, respectively.
To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/2178/119791_43b6e663c4637835_005full.jpg
Table 2: Significant intervals reported in this release
(intervals greater than 3.0 g/t Au are red;
intervals greater than 9.0 g/t Au or greater than 2.0 m wide are bolded)
Drill Hole
From (m)
To (m)
Interval (m)
Au (g/t)
TUG136
(upper
part of hole was
previously reported)
293.5
293.8
0.3
0.79
308.7
309.3
0.6
1.55
379.3
379.6
0.3
1.05
407.4
409.4
2.0
1.88
410.9
412.7
1.8
2.45
415.6
416.2
0.6
0.9
418.6
418.9
0.3
1.08
421.5
426.7
5.2
4.4
including
421.5
421.8
0.3
30.67
and
422.7
423.0
0.3
12.62
and
424
424.3
0.3
6.17
and
425.7
426.4
0.7
6.32
428.2
432.1
3.9
7.86
including
429.1
432.1
3.0
10.14
which includes
429.4
429.7
0.3
34.56
and also includes
431.5
432.1
0.6
20.13
435.3
435.6
0.3
6.47
445.10
446.6
1.5
87.83
including
445.10
445.7
0.6
108.41
which includes
445.40
445.7
0.3
176.5
and also includes
446.30
446.6
0.3
222
459.00
459.6
0.6
10.17
including
459.00
459.3
0.3
14.86
465.24
466.14
0.9
0.59
477.8
478.1
0.3
1.06
498.7
499.0
0.3
0.68
503.4
503.7
0.3
0.50
506
506.3
0.3
0.69
507.5
507.8
0.3
3.57
537.3
537.6
0.3
13.80
538.6
538.9
0.3
2.38
542.3
542.9
0.6
2.31
Drill Hole
From (m)
To (m)
Interval (m)
Au (g/t)
TUG137
(upper
part of hole was
previously reported)
322.7
323.7
1.0
0.57
337.05
337.35
0.3
1.1
337.65
338.8
1.15
1.1
600.2
600.5
0.3
1.81
690.4
690.7
0.3
0.93
749.4
749.7
0.3
3.36
771.6
773.7
2.1
1.26
780.3
780.6
0.3
0.84
TUG138
4.2
4.5
0.3
1.17
28.5
30.6
2.1
4.55
including
28.8
29.1
0.3
9.67
and
30.0
30.3
0.3
15.28
81.9
83.1
1.2
3.47
95.4
95.7
0.3
0.68
100.2
100.5
0.3
1.14
108.3
115.2
6.9
6.74
including
109.8
112.8
3.0
13.67
which includes
111.3
112.8
1.5
23.03
which includes
111.3
111.6
0.3
37.29
and also includes
112.2
112.5
0.3
29.70
and
114.3
115.2
0.9
2.23
117.3
117.6
0.3
0.94
119.7
120.0
0.3
0.82
153.9
155.1
1.2
0.98
156.9
159.0
2.1
1.90
including
157.2
157.5
0.3
5.99
160.2
162.0
1.8
0.96
178.8
179.4
0.6
6.75
including
178.8
179.1
0.3
11.54
180.9
181.2
0.3
7.38
201.6
201.9
0.3
0.59
211.5
212.4
0.9
10.55
including
211.8
212.4
0.6
15.51
276.9
277.2
0.3
0.72
282.9
285.9
3.0
0.65
305.1
305.7
0.9
7.91
including
305.1
305.4
0.3
15.34
Drill Hole
From (m)
To (m)
Interval (m)
Au (g/t)
and
305.4
305.7
0.3
8.19
321.3
321.6
0.3
0.82
341.4
344.7
3.0
7.71
including
341.7
342.9
1.2
9.59
and
343.2
343.8
0.6
11.95
and
344.1
344.4
0.3
7.23
345.0
346.5
1.5
1.12
354.6
357.3
2.7
2.04
385.5
385.8
0.3
0.82
420.0
420.3
0.3
0.54
422.1
423
0.9
0.51
427.5
427.8
0.3
3.08
429.3
429.6
0.3
0.88
431.1
431.4
0.3
0.51
433.2
434.1
0.9
1.93
455.1
455.4
0.3
2.2
459.4
461.5
2.1
2.26
including
460.9
461.2
0.3
5.73
541.5
542.1
0.6
15.21
including
541.5
541.8
0.3
26.45
550.2
551.1
0.9
1.74
561.0
561.3
0.3
114.80
568.2
569.1
0.9
7.29
including
568.5
568.8
0.3
17.00
571.5
574.5
3.0
23.14
including
571.5
571.8
0.3
118.60
including
571.8
572.1
0.3
6.01
including
572.4
572.7
0.3
51.43
including
573.0
573.3
0.3
49.72
638.1
638.4
0.3
0.69
TUDDH525 re-
entry
466.6
466.9
0.3
0.95
627.5
629.3
1.8
1.52
including
629
629.3
0.3
4.77
TUDDH561
369.9
370.2
0.3
0.89
374.4
374.7
0.3
3.94
521.4
522.3
0.9
1.56
637.6
639.1
1.5
0.59
705.4
706.3
0.9
1.17
Drill Hole
From (m)
To (m)
Interval (m)
Au (g/t)
TUDDH563
13.66
15.7
2.04
3.29
including
13.66
13.96
0.3
20.41
16.83
17.0
0.17
0.7
18.8
19.1
0.3
0.57
21.8
22.4
0.6
5.13
25.2
26.4
1.2
1.58
52.49
52.79
0.3
63.29
58.1
58.5
0.4
6.48
70.38
70.68
0.3
0.63
125.25
125.55
0.3
0.58
164.55
164.85
0.3
68.5
350.82
351.76
0.94
2.18
454.35
455.85
1.5
0.99
481.7
482.85
1.15
1.68
488.9
489.5
0.6
1.68
491.0
491.3
0.3
0.52
790.4
791.16
0.76
1.65
TUDDH571
(upper
part of hole was
previously reported)
283.5
284.1
0.6
0.99
295.2
298.5
3.3
0.56
307.8
308.4
0.6
0.53
481.8
482.7
0.9
5.23
including
482.1
482.4
0.3
12.46
516.1
516.7
0.6
0.53
518.2
518.8
0.6
0.96
519.4
519.7
0.3
0.63
546.4
546.7
0.3
0.67
548.8
549.1
0.3
0.69
550
552.4
2.4
0.71
559.6
559.9
0.3
0.69
725.2
725.8
0.6
0.63