Liberty Gold Drills 2.56 g/t Au over 41.1 Metres including 4.47 g/t Au over 19.8 Metres and 2.89 g/t Au over 25.9 Metres Confirms 1 Kilometer-Long High-Grade Oxide Gold Zone, Black Pine Project, Great Basin, USA
Page 1 of 4
NEWS RELEASE 19-13 July 31, 2019
Liberty Gold Drills 2.56 g/t Au over 41.1 Metres including 4.47 g/t Au over 19.8 Metres and
2.89 g/t Au over 25.9 Metres
Confirms 1 Kilometer-Long High-Grade Oxide Gold Zone, Black Pine Project,
Great Basin, USA
VANCOUVER, B.C. – Liberty Gold Corp. (LGD-TSX) (“Liberty Gold” or the “Company”) is pleased
to announce that ongoing drilling at Black Pine in southern Idaho continues to intersect thick zones
of high-grade oxide gold mineralization, demonstrating continuity along a northwest-trending zone
that we can now document is at least one kilometer (“km”) long and expanding the size and potential
of this Carlin–style gold system. The new drill results represent some of the best and highest grade
unmined drill intercepts on the property, as measured by grade multiplied by thickness.
A second drill has been added to the project to focus on a second discovery located 240 metres
(“m”) to the east of the first . To date , there is only a single drill hole in this area, LBP023 , which
returned 1.78 grams per tonne gold (“g/t Au”) over 48.8 m, including 4.72 g/t Au over 15.2 m1. This
may represent the first hole into another zone parallel to the first.
Drill highlights include:
• 2.56 g/t Au over 41.1 m , including 4.47 g/t Au over 19.8 m, and including 8.76 g/t Au
over 4.6 m in LBP029
• 2.18 g/t Au over 10.7 m, including 2.90 g/t Au over 7.6 m and 2.89 g/t Au over 25.9 m,
including 4.52 g/t Au over 15.2 m and including 6.63 g/t Au over 6.1 m in LBP027
• 1.36 g/t Au over 32.0 m, including 1.95 g/t Au over 16.8 m in LBP025
• 0.93 g/t Au over 12 .2 m and 0.67 g/t Au over 10.7 m and 1.14 g/t Au over 25.9 m,
including 4.17 g/t Au over 4.6 m in LBP028
Multiple zones of gold mineralization above a 0.20 g/t Au cutoff grade are present in all drill holes.
For a cross section of drill collars and traces for the current release, please click
here: http://libertygold.ca/images/news/2019/july/BlackPine_NR07312019CS.pdf
For a map of drill collars and traces for the current release, please click
here: http://libertygold.ca/images/news/2019/july/BlackPine_NR07312019Map.pdf
For a complete table of drill results from all Liberty Gold drill holes at Black Pine, please click
here: http://libertygold.ca/images/news/2019/july/BP_Intercepts07312019.pdf
Key Points
• Recent drilling provides evidence for excellent continuity of high-grade mineralization
along a northwest-trending corridor at least 1000 m long. Additional drill pads have
been constructed to test for continuity over an expanded, 1.5 km-long corridor.
Page 2 of 4
• LBP027 and LBP029 contain long intercepts with the highest grades drilled to date in
this zone.
• All gold mineralization encountered in the highlight intercepts to date is oxide .
Weighted average cyanide solubility for the long, high-grade intervals in LBP027 and
LBP029 is 95% and 96%, respectively.
• The mineralized interval in LBP029 ranks 2nd on a list of 500 unmined drill intercepts
on the property as defined by gold in grams multiplied by thickness in metres. Five of
the top 11 unmined intercepts were drilled by Liberty Gold based on assays received
for 33 holes to date, including three of the top five.
Drilling in August will focus on areas flanking the mineralized corridor, in order to assess the width
of the gold mineralized zone, on the area around the second discovery hole, LBP023, and an area
beneath the east end of the historic A Pit.
“High grade oxide gold discoveries in the Great Basin have been rare over the last 20 years,”
stated Cal Everett, President & CEO of Liberty Gold. “Liberty Gold intends to define the size and
grade of the two discoveries to date, then we will push outward from there. Never wander when
you are within it. Internal modelling suggests that approximately 90 drill holes will be required by
year end to define gold mineralization in this area.”
1See July 15 2019 press release for details. Please note that some of the interval grades in previous press releases
and the table have been revised slightly to reflect the consistent use of duplicate samples and gravimetric analysis for
individual samples that assay >5.0 g/t Au. Liberty Gold does not consider these changes to be material.
ABOUT THE 2019 BLACK PINE DRILL PROGRAM
One Reverse Circulation (“RC”) drill was deployed on April 23, 2019, with a second drill added on
June 18, to drill an estimated 16,000 m in 80 to 100 holes to provide a comprehensive test of the
core of an oxide gold system estimated at over 12 square km (“km2“) in size. The drill program
represents the culmination of over 2 years of intensive compilation, modeling and interpretation of
the complex geology of the project, as well as a 20 month permitting process. The goal of the 2019
drill program is to carry out a comprehensive test of the geological and mineralization model over a
roughly seven km2 area within the 12 km2 identified gold system, starting with a highly prospective
area near the historic A and B pits. Extensive data compilation, involving over 1800 historic drill
holes, thousands of surface soil and rock samples and 5 shallow pits, suggests that a large volume
of rock under and adjacent to zones of previously drill-tested and/or mined gold mineralization
contains highly prospective stratigraphy and favourable structural settings for hosting Carlin style
gold mineralization.
Gold mineralization is hosted in complexly deformed strata of the Pennsylvanian to Permian
Oquirrh Group, consisting of an upper sandstone unit structurally emplaced over a sequence of
carbonate and siliciclastic rocks, including limestone and dolostone, calcareous and non-calcarous
shale, siltstone and sandstone, which in turn overly Mississippian shale and limestone. The
carbonate sequence forms a highly prospective tectonostratigraphic sequence ranging from 100 to
over 300 m thick. The various rock units were subjected to late Cretaceous folding and thrusting,
followed by low- to high-angle normal faulting in the early to middle Cenozoic. The extensive
deformation provided the architecture and plumbing for gold-bearing fluids to penetrate the rock
and deposit very fine-grained gold in reactive calcareous siltstones and brecciated strata of all
Page 3 of 4
types. Liberty Gold has recognized several moderate-angle normal fault corridors that intersect the
most prospective stratigraphic units; collectively these intersections of structure with prospective
stratigraphy form the primary targets for 2019 drilling.
ABOUT BLACK PINE
Black Pine is located in the northern Great Basin, immediately adjacent to the Utah/Idaho border. It
is a Carlin-style gold system, similar in many ways to the prolific deposits located along Nevada’s
Carlin trend. Like Newmont’s Long Canyon deposit, Black Pine represents a growing number of
Carlin-style gold systems located off the main Carlin and Cortez trends in underexplored parts of
the Great Basin. The historic Black Pine Mine operated from 1992 to 1997, during a period of
historically low gold prices, with 435,000 ounces of gold produced from five composite, shallow
pits, at an average grade of 0.63 g/t Au and average recovery of approximately 66%.
A virtual site tour and 3D model of Black Pine property is available on the homepage of the
Company’s website: www.libertygold.ca.
Moira Smith, Ph.D., P.Geo., Vice-President Exploration and Geoscience, Liberty Gold, is the Company's designated Qualified Person for this news
release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and has reviewed and validated
that the information contained in the release is accurate. Drill composites were calculated using a cut-off of 0.20 g/t. Drill intersections are reported
as drilled thicknesses. True widths of the mineralized intervals vary between 30 and 100% of the reported lengths due to varying drill hole
orientations, but are typically in the range of 60 to 100% of true width. Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire
Assay of a 30 gram (1 assay ton) charge with an AA finish, or if over 5.0 g/t were re-assayed and completed with a gravimetric finish. For these
samples, the gravimetric data were utilized in calculating gold intersections. For any samples assaying over 0.20 ppm an additional cyanide leach
analysis is done where the sample is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final leach solution is then
centrifuged and analyzed by Atomic Absorption Spectroscopy. QA/QC for all drill samples consists of the insertion and continual monitoring of
numerous standards and blanks into the sample stream, and the collection of duplicate samples at random intervals within each batch. Selected
holes are also analyzed for a 51 multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005 Accredited, with the Elko
prep lab listed on the scope of accreditation.
ABOUT LIBERTY GOLD
Liberty Gold is focused on exploring the Great Basin of the United States, home to large-scale gold
projects that are ideal for open-pit mining. This region is one of the most prolific gold-producing
regions in the world and stretches across Nevada and into Idaho and Utah. We know the Great
Basin and are driven to discover and advance big gold deposits that can be mined profitably in
open-pit scenarios. Our flagship projects are Black Pine, Goldstrike and Kinsley Mountain, all of
which are past producing open-pit mines, where previous operators only scratched the surface.
For more information, visit www.libertygold.ca or contact:
Susie Bell, Manager, Investor Relations
Phone: 604-632-4677 or Toll Free 1-877-632-4677
All statements in this press release, other than statements of historical fact, are "forward-looking information" with respect to Liberty Gold within the
meaning of applicable securities laws, including statements that address potential quantity and/or grade of minerals, potential size and expansion of
a mineralized zone, proposed timing of exploration and development plans. Forward-looking information is often, but not always, identified by the
use of words such as "seek", "anticipate", "plan", "continue", "planned", "expect", "project", "predict", "potential", "targeting", "intends", "believe",
"potential", and similar expressions, or describes a "goal", or variation of such words and phrases or state that certain actions, events or results
"may", "should", "could", "would", "might" or "will" be taken, occur or be achieved. Forward-looking information is not a guarantee of future
performance and is based upon a number of estimates and assumptions of management at the date the statements are made including, among
others, assumptions about future prices of gold, and other metal prices, currency exchange rates and interest rates, favourable operating conditions,
political stability, obtaining governmental approvals and financing on time, obtaining renewals for existing licenses and permits and obtaining
required licenses and permits, labour stability, stability in market conditions, availability of equipment, accuracy of any mineral resources, the
Page 4 of 4
availability of drill rigs, successful resolution of disputes and anticipated costs and expenditures. Many assumptions are based on factors and events
that are not within the control of Liberty Gold and there is no assurance they will prove to be correct.
Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future
results expressed or implied by such forward-looking information, including, risks related to the interpretation of results and/or the reliance on
technical information provided by third parties as related to the Company’s mineral property interests; changes in project parameters as plans
continue to be refined; current economic conditions; future prices of commodities; possible variations in grade or recovery rates; the costs and
timing of the development of new deposits; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform;
the timing and success of exploration activities generally; delays in permitting; possible claims against the Company; labour disputes and other risks
of the mining industry; delays in obtaining governmental approvals, financing or in the completion of exploration as well as those factors discussed
in the Annual Information Form of the Company dated March 27, 2019 in the section entitled "Risk Factors", under Liberty Gold’s SEDAR profile
at www.sedar.com.Although Liberty Gold has attempted to identify important factors that could cause actual actions, events or results to differ
materially from those described in forward-looking information, there may be other factors that cause actions, events or results not to be as
anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate as actual results and future events
could differ materially from those anticipated in such statements. Liberty Gold disclaims any intention or obligation to update or revise any forward-
looking information, whether as a result of new information, future events or otherwise unless required by law.