Liberty Gold Announces Second Tranche of Drill Results from the Black Pine Oxide Gold Project, Great Basin, USA 2.37 g/t Au over 10.7 m and 0.65 g/t Au over 15.2 m including 1.38 g/t over 4.6 m 0.96 g/t Au over 27.4 m and 1.28 g/t Au over 6.1 m and .54 g/t Au over 15.2 m
Page 1 of 4
NEWS RELEASE 18-09 April 11, 2018
Liberty Gold Announces Second Tranche of Drill Results from the Black Pine Oxide Gold
Project, Great Basin, USA
2.37 g/t Au over 10.7 m and 0.65 g/t Au over 15.2 m including 1.38 g/t over 4.6 m
0.96 g/t Au over 27.4 m and 1.28 g/t Au over 6.1 m and .54 g/t Au over 15.2 m
VANCOUVER, B.C. – Liberty Gold Corp. (LGD-TSX) (“Liberty Gold” or the “Company”) is pleased
to announce the remaining results from a recent reverse circulation (“RC”) drill program at the
Black Pine Project, one of its three principle gold projects located in the prolific Great Basin of the
United States.
Black Pine, located in southeastern Idaho, is a past-producing oxide - heap leach gold mine that
contains a large, shallow, district-scale, Carlin-style gold system, similar in nature to Liberty Gold’s
Goldstrike Project.
The drill program was designed to test five currently permitted target areas, four for verification and
possible expansion of historical drill hole results and one to test the eastern edge of the main gold
target area where historical base metal mining occurred.
In late 2017, twelve reverse circulation (RC) holes were successfully drilled from five locations
within a 12 square kilometre target area distinguished by the presence of historic pits, gold-in-soil
anomalies and over 1750 historic drill holes. The drilling succeeded in validating and expanding
historical results adjacent to historic pits and in established target areas and demonstrated
exceptional exploration upside beneath the limit of shallow historical drilling.
Drill highlights include:
• 0.96 grams per tonne gold (g/t Au) over 24.4 metres (m) including 6.18 g/t Au over 1.5
m and 1.03 g/t Au over 9.1 m including 1.28 g/t Au over 6.1 m and 0.54 g/t Au over 15.2
m in LBP004
• 0.72 g/t Au over 9.1 m including 2.65 g/t Au over 1.5 m and 0.42 g/t Au over 9.1 m in
LBP005
• 1.80 g/t Au over 7.6 m including 2.77 g/t Au over 4.6 m and 0.60 g/t Au over 18.3 m in
LBP006
• 0.52 g/t Au over 33.5 m including 1.41 g/t Au over 3.0 m and 0.45 g/t Au over 9.1 m and
0.69 g/t Au over 24.4 m in LBP009
• 2.37 g/t Au over 10.7 m and 0.65 g/t Au over 15.2 m including 1.38 g/t Au over 4.6 m in
LBP011.
Page 2 of 4
Two drill holes were previously released (see press release dated January 5, 2018):
• 1.49 g/t Au over 77.7 m and 1.10 g/t Au over 15.2 m and .58 g/t Au over 39.6 m in LBP002
• 0.61 g/t Au over 15.2 m and 0.53 g/t Au over 27.4 m in LBP003
KEY POINTS
• LBP004, 005 and 006 were drilled in the J Anomaly north of the historic A Pit. The area is
characterized by limited historic drilling testing of a portion of large soil anomaly. A large
area of the soil anomaly remains untested, and drill-tested gold mineralization
remains open in most directions with two gold zones identified in each hole.
• LBP009 and LBP011 were drilled in an area near the B Extension Pit, attesting to the
upside in this area.
• LBP011, on the south side of the B Extension Pit, returned a high-grade intercept starting
from surface. This area is open to the south and southwest, with no historic drill
holes or soil geochemical sampling for a distance of over 200 m.
• A comprehensive Plan of Operations was submitted to U.S. Forest Service in Q2 2017 that
will allow access to the entire main target area as well as other satellite areas.
On the basis of our validation drill program, compilation of 1874 historic holes, past production
figures and comparison to the size and grade of other nearby sediment-hosted deposits, Liberty
Gold is targeting a 2 to 4 million ounce oxide gold deposit (60-200 million tonnes grading between
0.4 and 1.5 g/t gold) in the main area of alteration and historic mining.*
* Potential quantity and grade is conceptual in nature. There has been insufficient exploration
to define a mineral resource and it is uncertain if further exploration will result in the target
being delineated as a mineral resource.
For a complete table of drill results from the current holes, please click
here: http://libertygold.ca/images/sites/default/files/BP_Intercepts032018.pdf
For a map of drill collars and traces for the current release, please click
here: http://libertygold.ca/images/sites/default/files/BlackPine_NR092018.pdf
The Company is targeting a Phase 2 drilling program in order to investigate the scope of multiple
targets. This drill program will follow up on outstanding results from the A Basin area (see January
5, 2018 press release), J Anomaly and B pit extension, as well as test other high priority targets. A
new Plan of Operations is pending that will open up access to the entire 12 square kilometre area
of anomalous surface soil and rock geochemistry and historic gold in drill holes for comprehensive
drill testing. In particular, between and proximal to the historical C-D and E pits, there is an
approximately 2.5 square km area where historical soil samples grade between 0.10 and 0.50 g/t
Au, which warrants an extensive drill program.
About Black Pine
The Black Pine property is part of the Great Basin and located in southeastern Idaho, and covers
31.7 km2. The mineralized zone was extensively drilled in the immediate pit areas, with mining
carried out by Pegasus Gold Corp. from 7 shallow pits over a 6-year period from 1992 to 1997 in a
Page 3 of 4
run of mine heap leach operation. The mining operation produced 435,000 ounces of gold from ore
averaging 0.63 g/t Au, with a reported recovery of 65%.
Liberty Gold is in possession of data from 1874 shallow holes, totaling 191,499 metres, and has
identified three broad target types for drill testing, including: 1) down-dip extensions of gold
mineralization from mined pits under shallow cover, as evidenced by data suggesting that 19% of
the historic holes bottomed in gold mineralization; 2) unmined bodies of mineralization identified by
previous operators and verified by Liberty’s drilling to date; and 3) undrilled, high priority gold-in-
soil anomalies.
For more details about the Black Pine Property, including location, geology & geochemistry maps
and past production and target figures, please click here:
http://libertygold.ca/images/Presentations/2018/February/Black_Pine_-_FINAL_Feb_2018.pdf
Moira Smith, Ph.D., P.Geo., Vice-President Exploration and Geoscience, Liberty Gold, is the Company's designated Qualified Person for this news
release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and has reviewed and validated
that the information contained in the release is accurate. Drill composites were calculated using a cut-off of 0.20 g/t. Drill intersections are reported
as drilled thicknesses. True widths of the mineralized intervals vary between 30 and 100% of the reported lengths due to varying drill hole
orientations, but are typically in the range of 60 to 80% of true width. Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire
Assay of a 30 gram (1 assay ton) charge with an AA finish, or if over 5.0 g/t were re-assayed and completed with a gravimetric finish. For these
samples, the gravimetric data were utilized in calculating gold intersections. For any samples assaying over 0.200 ppm an additional cyanide leach
analysis is done where the sample is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final leach solution is then
centrifuged and analyzed by AAS. QA/QC for all drill samples consists of the insertion and continual monitoring of numerous standards and blanks
into the sample stream, and the collection of duplicate samples at random intervals within each batch. Selected holes are also analyzed for a 51
multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005 Accredited, with the Elko prep lab listed on the scope of
accreditation.
Some of the data presented herein, includes historic data developed by previous operators of the Black Pine property. Historic drill intersections are
reported as drilled thicknesses. True widths of individual mineralized intervals are unknown at this time, although trends in mineralization suggest
that true thicknesses range between 40 and 90% of drilled thicknesses. Production data is sourced from Pegasus internal yearly statements on
production and remaining Reserves and Mineralized material.Moira Smith, Ph.D., P.Geo, Vice President, Exploration and Geoscience, Liberty Gold,
and Qualified Person under NI 43-101, has, to the extent possible, verified that the historic data herein, including the results of drilling, sampling,
and assaying by previous operators, is reliable. Historic data largely predate the introduction of NI 43-101 and modern QA-QC protocols and
therefore there are limitations on the level of verification that can be achieved.
ABOUT LIBERTY GOLD
Liberty Gold is focused on exploring the Great Basin of the United States, home to large-scale gold
projects that are ideal for open-pit mining. This region is responsible for the majority of all gold
produced in the USA and stretches across Nevada and into Idaho and Utah. We know the Great
Basin and are driven to discover and advance big gold deposits that can be mined profitably in
open-pit scenarios. Our flagship projects are Goldstrike, Black Pine and Kinsley Mountain, all of
which are past producing open-pit mines, where previous operators only scratched the surface.
For more information, visit www.libertygold.ca or contact:
Susie Bell, Manager, Investor Relations
Phone: 604-632-4677 or Toll Free 1-877-632-4677
All statements in this press release, other than statements of historical fact, are "forward-looking information" with respect to Liberty Gold within the
meaning of applicable securities laws, including statements that address potential quantity and/or grade of minerals, potential size and expansion of
a mineralized zone, proposed timing of exploration and development plans. Forward-looking information is often, but not always, identified by the
use of words such as "seek", "anticipate", "plan", "continue", "planned", "expect", "project", "predict", "potential", "targeting", "intends", "believe",
"potential", and similar expressions, or describes a "goal", or variation of such words and phrases or state that certain actions, events or results
"may", "should", "could", "would", "might" or "will" be taken, occur or be achieved. Forward-looking information is not a guarantee of future
performance and is based upon a number of estimates and assumptions of management at the date the statements are made including, among
Page 4 of 4
others, assumptions about future prices of gold, and other metal prices, currency exchange rates and interest rates, favourable operating conditions,
political stability, obtaining governmental approvals and financing on time, obtaining renewals for existing licences and permits and obtaining
required licences and permits, labour stability, stability in market conditions, availability of equipment, the availability of drill rigs, the release of an
initial resource report, successful resolution of disputes and anticipated costs and expenditures. Many assumptions are based on factors and
events that are not within the control of Liberty Gold and there is no assurance they will prove to be correct.
Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future
results expressed or implied by such forward-looking information, including, risks related to the interpretation of results and/or the reliance on
technical information provided by third parties as related to the Company’s mineral property interests; changes in project parameters as plans
continue to be refined; current economic conditions; future prices of commodities; possible variations in grade or recovery rates; the costs and
timing of the development of new deposits; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform;
the timing and success of exploration activities generally; delays in permitting; possible claims against the Company; labour disputes and other risks
of the mining industry; delays in obtaining governmental approvals, financing or in the completion of exploration as well as those factors discussed
in the Annual Information Form of the Company dated March 26, 2018 in the section entitled "Risk Factors", under Liberty Gold’s SEDAR profile
at www.sedar.com.
Although Liberty Gold has attempted to identify important factors that could cause actual actions, events or results to differ materially from those
described in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or
intended. There can be no assurance that such information will prove to be accurate as actual results and future events could differ materially from
those anticipated in such statements. Liberty Gold disclaims any intention or obligation to update or revise any forward-looking information, whether
as a result of new information, future events or otherwise unless required by law.