Liberty Gold Announces Maiden Resource Estimate for Goldstrike Deposit, Utah 865,000 Indicated and 274,000 Inferred Gold Ounces
Page 1 of 4
NEWS RELEASE 18-06 February 08, 2018
Liberty Gold Announces Maiden Resource Estimate for
Goldstrike Deposit, Utah
865,000 Indicated and 274,000 Inferred Gold Ounces
VANCOUVER, B.C. – Liberty Gold Corp. (LGD - TSX) ("Liberty Gold" or the "Company") is pleased to
announce a maiden independent resource estimate at its Goldstrike Oxide Gold project in
southwestern Utah. This resource estimate crystallizes 3 years of data compilation and drilling, and is
a strong foundation on which to layer engineering, metallurgical studies, as well as ongoing expansion
drilling. It is a key asset in Liberty Gold’s portfolio of advanced-staged, Carlin-style gold projects in the
Great Basin of the USA.
The Classified Mineral Resource estimate is quoted at a cut-off grade of 0.25 grams per tonne gold (g/t
Au) and consists of:
• An indicated resource of 865,000 ounces of gold at an average grade of 0.54 g/t Au
(49,553,000 tonnes); and
• An inferred resource of 274,000 ounces of gold at an average grade of 0.52 g/t Au
(16,443,000 tonnes).
Commenting on these results, Cal Everett, President and CEO of Liberty Gold stated, “We are thrilled
to release the first resource estimate for our flagship Goldstrike Property, the result of three years of
hard work by our brilliant geological team. We have exceeded our initial resource target expectation
and will continue to drill and expand the Goldstrike Deposit as well as the new discoveries that
surround it. This is an important first step in turning a 24 year-old, past-producing mine into a modern,
multi-million ounce mining project.”
Goldstrike Project Pit Constrained Classified Mineral Resource & Cut-Off Grade Sensitivity Table
(effective as of February 7, 2018)*
Cutoff
(Au g/t)
Indicated Inferred
Tonnes Grade Au Ounces Au Tonnes Grade Au Ounces Au
(1,000s) (g/t) (1,000s) (1,000s) (g/t) (1,000s)
0.1 72,303 0.43 994 24,739 0.40 320
0.2 57,846 0.50 925 19,603 0.47 296
0.25 49,553 0.54 865 16,443 0.52 274
0.3 42,102 0.59 800 13,465 0.57 247
0.4 29,159 0.70 655 8,760 0.69 195
0.5 19,861 0.82 522 6,025 0.80 156
0.6 13,874 0.93 416 4,150 0.92 123
0.7 9,774 1.05 331 2,895 1.04 96
* See resource estimate notes below
Page 2 of 4
KEY POINTS
• The resource captures drilling in the Historic Mine Trend, comprising the Main - Dip Slope,
Peg Leg and Western zones, as well as the Mineral Mountain area.
• At higher cut-off grades, much of the resource is retained, potentially providing optionality in
mine planning scenarios.
• A combination of historic and Liberty Gold drilling in 1,730 tightly-spaced drill holes,
representing 153,000 metres of drilling, allows for the resource estimate to have a high
degree of confidence, as illustrated by over 75% of the resource in the Indicated category.
• Most of the property remains unexplored or incompletely tested, including large areas
extending from the Dip Slope zone that remain open in several directions for resource
expansion.
• Metallurgical results indicate rapid gold recoveries, relatively insensitive to crush size, which
support a simple, low cost, run-of-mine heap leach process. Metallurgical test work by
Liberty Gold shows that greater than 80% of the gold is recovered within the first 10 days of
column leaching.
Drilling will recommence on approximately March 1, 2018. Drilling will focus on expanding the
resource, as well as testing of new targets property-wide.
Goldstrike is located in the eastern Great Basin, immediately adjacent to the Utah/Nevada border, and
is a Carlin-style gold system, similar in many ways to the prolific deposits located along Nevada’s
Carlin trend. Like Kinsley Mountain and Newmont’s Long Canyon deposit, Goldstrike represents part
of a growing number of Carlin-style gold systems located off the main Carlin and Cortez trends in
underexplored parts of the Great Basin. The historic Goldstrike Mine operated from 1988 to 1994, with
209,000 ounces of gold produced from 12 shallow pits, at an average grade of 1.2 g/t Au and an
average recovery of approximately 75%.
ESTIMATION METHODS
The resource estimate was completed by James N. Gray, P.Geo. of Advantage Geoservices Ltd., an
Independent Qualified Person as defined by National Instrument 43-101 Standards of Disclosure for
Mineral Projects (“NI 43-101”) in accordance with the Canadian Institute of Mining, Metallurgy and
Petroleum (“CIM”) Standards on Mineral Resources and Mineral Reserves, adopted by the CIM
Council, as amended. Mr. Gray is the Qualified Person for this news release. Estimation methods are
summarized below. Further details of the estimation methods and procedures will be available in a NI
43-101 technical report, to be co-authored and released by SRK Consulting (Canada) Inc. (“SRK”),
which will be filed on SEDAR (www.sedar.com), within 45 days from the date of this release.
Geologic controls for resource estimation are based on the geologic interpretation provided by Liberty
Gold. Gold mineralization is primarily associated with a series of steeply dipping normal-oblique fault
zones as well as with a low-angle unconformity surface (“Control Surfaces”). Gold grades have been
estimated by inverse distance squared (ID2) interpolation into 10 m3 blocks. Sample selection during
estimation is based on distance to the Control Surfaces and, in this way, reproduces the concentric or
banded nature of fault zones and stratigraphic trends. Density has been applied at an average value of
2.52 t/m3 based on 159 measurements carried out by Liberty on drill core.
Page 3 of 4
The Mineral Resource estimate is supported by 1,730 holes, totaling 153.0 km, that fall inside the limits
of the block models. Samples were composited to the average sample length of 1.524 m (5 feet) prior
to use in grade estimation; 102,264 composites are contained inside the modelled volume. Statistical
evaluation of composite data by fault and stratigraphic zones led to the establishment of high-grade
capping limits by control surface. In total, 349 composites were capped for use in resource estimation.
The Mineral Resource has been classified based on available drill data as well as by proximity to the
interpreted geologic controls. Inferred Mineral Resource blocks are within 50 m of a sample or must be
estimated by at least two holes. Indicated Mineral Resource blocks must lie within 40 m of sample data
and must be estimated by at least three holes if within 40 m of a Control Surface or by at least two
holes if within 30 m of a Control Surface.
Reasonable prospects of eventual economic extraction were established through the generation of
Whittle optimized pit shells; all reported resource is contained within those shells. Optimization
parameters were (in U.S. Dollars): $2.25/tonne (t) mining cost; $4.30/t processing and G&A cost
(assuming Run of Mine Heap Leach operation); 50 degree pit slopes; and $1500/oz gold less $2.20
selling cost. An economic internal cut-off grade was estimated at 0.13 g/t Au. Based on on-going
metallurgical studies, recovery was variable depending on head grade: Au ≥ 0.4 g/t - rec% =
0.8133*Au0.0677; Au < 0.4 g/t - rec% = 0.8491*Au0.1301.The Whittle pit model was produced by Grant
Carlson, P. Eng. of SRK, an Independent Qualified Person as defined by National Instrument 43-101
Standards of Disclosure for Mineral Projects.
Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire Assay of a 30 gram (1
assay ton) charge with an AA finish, or if over 5.0 g/t were re-assayed and completed with a
gravimetric finish. For these samples, the gravimetric data were utilized in calculating gold
intersections. For any samples assaying over 0.200 ppm an additional cyanide leach analysis is done
where the sample is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final
leach solution is then centrifuged and analyzed by AAS. Metallic screen techniques may be employed
where the presence of coarse free gold is suspected. Approximately 1000 grams of coarse reject
material are pulverized and screened. Two splits of the fine fraction are assayed, as well as all material
that does not pass through the screen (the coarse fraction). The final gold assay reported is a
weighted average of the coarse and fine fractions. QA/QC for all drill samples consists of the insertion
and continual monitoring of numerous standards and blanks into the sample stream, and the collection
of duplicate samples at random intervals within each batch. Selected holes are also analyzed for a 51
multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005 Accredited,
with the Elko prep lab listed on the scope of accreditation.
The technical information contained in this news release has been reviewed and approved by James
N. Gray, P.Geo. of Advantage Geoservices Ltd., an Independent Qualified Person as defined by NI 43-
101. Mr. Gray has verified the data disclosed, including sampling, analytical, and test data underlying
the drill results and he consents to the inclusion in this release of said data in the form and context in
which it appears.
Moira Smith, Ph.D., P.Geo., Vice-President Exploration and Geoscience, Liberty Gold, is the
Company's designated Qualified Person for this news release within the meaning of National
Page 4 of 4
Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") and has reviewed and
validated that the information contained in the release is accurate.
ABOUT LIBERTY GOLD
Liberty Gold is focused on exploring the Great Basin of the United States, home to large-scale gold
projects that are ideal for open-pit mining. This region is responsible for the majority of all gold
produced in the USA and stretches across Nevada and into Idaho and Utah. We know the Great
Basin and are driven to discover and advance big gold deposits that can be mined profitably in open-
pit scenarios. Our flagship projects are Goldstrike, Black Pine and Kinsley Mountain, all of which are
past producing open-pit mines, where previous operators only scratched the surface.
For more information, visit www.libertygold.ca or contact:
Susie Bell, Manager, Investor Relations
Phone: 604-632-4677 or Toll Free 1-877-632-4677
All statements in this press release, other than statements of historical fact, are "forward-looking information" with respect to Liberty Gold within the
meaning of applicable securities laws, including statements that address potential quantity and/or grade of minerals, potential size and expansion of a
mineralized zone, proposed timing of exploration and development plans. Forward-looking information is often, but not always, identified by the use of
words such as "seek", "anticipate", "plan", "continue", "planned", "expect", "project", "predict", "potential", "targeting", "intends", "believe", "potential", and
similar expressions, or describes a "goal", or variation of such words and phrases or state that certain actions, events or results "may", "should", "could",
"would", "might" or "will" be taken, occur or be achieved. Forward-looking information is not a guarantee of future performance and is based upon a
number of estimates and assumptions of management at the date the statements are made including, among others, assumptions about future prices of
gold, and other metal prices, currency exchange rates and interest rates, favourable operating conditions, political stability, obtaining governmental
approvals and financing on time, obtaining renewals for existing licences and permits and obtaining required licences and permits, labour stability, stability
in market conditions, availability of equipment, accuracy of any mineral resources, the availability of drill rigs, the release of an initial resource report, the
completion of a preliminary economic assessment, successful resolution of disputes and anticipated costs and expenditures. Many assumptions are
based on factors and events that are not within the control of Liberty Gold and there is no assurance they will prove to be correct.
Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future results
expressed or implied by such forward-looking information, including, risks related to the interpretation of results and/or the reliance on technical
information provided by third parties as related to the Company’s mineral property interests; changes in project parameters as plans continue to be
refined; current economic conditions; future prices of commodities; possible variations in grade or recovery rates; the costs and timing of the development
of new deposits; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform; the timing and success of
exploration activities generally; delays in permitting; possible claims against the Company; labour disputes and other risks of the mining industry; delays in
obtaining governmental approvals, financing or in the completion of exploration as well as those factors discussed in the Annual Information Form of the
Company dated March 28, 2017 in the section entitled "Risk Factors", under Liberty Gold’s SEDAR profile at www.sedar.com.
The mineral resource estimates referenced in this press release use the terms "Indicated Mineral Resources" and "Inferred Mineral Resources." While
these terms are defined in and required by Canadian regulations (under NI 43-101), these terms are not recognized by the U.S. Securities and Exchange
Commission ("SEC"). "Inferred Mineral Resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic
and legal feasibility. The SEC normally only permits issuers to report mineralization that does not constitute SEC Industry Guide 7 compliant "reserves" as
in-place tonnage and grade without reference to unit measures. U.S. investors are cautioned not to assume that any part or all of mineral deposits in these
categories will ever be converted into reserves. Liberty Gold is not an SEC registered company.
Although Liberty Gold has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described
in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can
be no assurance that such information will prove to be accurate as actual results and future events could differ materially from those anticipated in such
statements. Liberty Gold disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information,
future events or otherwise unless required by law.