Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

LGD.TO ·

Liberty Gold Announces Drill Results from the Western and Dip Slope Zones at Goldstrike, Utah 3.24 g/t Au over 6.1 m within 1.20 g/t Au over 50.3 m 0.63 g/t Au over 73.2m 0.94 g/t Au over 21.3m

Drill Results

Page 1 of 3

NEWS RELEASE 17-22 November 16, 2017

Liberty Gold Announces Drill Results from the Western and Dip Slope Zones at Goldstrike, Utah

3.24 g/t Au over 6.1 m within 1.20 g/t Au over 50.3 m

0.63 g/t Au over 73.2m

0.94 g/t Au over 21.3m

VANCOUVER, B.C. – Liberty Gold Inc. (LGD - TSX) ("Liberty Gold" or the "Company") is pleased to

announce drill results from the Western Zone and Dip Slope Zone at the 100% controlled Goldstrike

Oxide Gold Project in southwestern Utah. Throughout the Historic Mine Trend, the aggressive

exploration program is focused on building continuity between the target areas and linking them

together over large areas into continuous zones of mineralization.

The current drill results from the Western Zone are from holes drilled along the north margin of the

Moosehead-Caribou Pit.

Highlights from the Moosehead Pit area, Western Zone, include:

 1.40 grams per tonne gold (g/t Au) over 9.1 metres (m) within 0.64 g/t Au over 54.9 m in

PGS397

 1.93 g/t Au over 6.1 m within 0.74 g/t Au over 48.8 m in PGS400

 0.68 g/t Au over 44.2 m in PGS404

 3.24 g/t Au over 6.1 m within 1.20 g/t Au over 50.3 m in PGS406

 0.40 g/t Au over 9.1 m and 0.47 g/t Au over 6.1 m and 0.61 g/t Au over 1.5 m and 1.46 g/t Au

over 10.7 m in PGS410

KEY POINTS

 The highlight holes were drilled on approximately 50 m-spaced fences along the north margin of

the Moosehead Pit, over an east-west strike length of approximately 200 metres.

 The holes extend unmined surface and near-surface mineralization to depth in a west-northwest

direction.

 Results are pending from an additional five holes, for a total strike length of over 300 m.

 The zone appears to extend to the west, and awaits further drilling.

 The drilling will add significantly to the mineralization endowment in the Western Zone.

Highlights from the Dip Slope Zone include:

 0.94 g/t Au over 21.3 m in PGS379

 0.41 g/t Au over 42.7 m in PGS401

 0.63 g/t Au over 73.2 m in PGS407

 0.51 g/t Au over 41.1 m in PGS411

KEY POINTS

 The Dip Slope is a very large, relatively sparsely drilled area that spans over 2 square kilometres.

 Current drill results are from the eastern Dip Slope Zone, which continues to yield excellent

results in the Padre Pit area and to the north of the Hassayampa historic pit.

Page 2 of 3

 A newly-accessed area of the central Dip Slope Zone, characterized by the presence of

extensive jasperoid mineralization with surface grab samples up to 11 g/t Au, is currently being

drill tested.

For a complete table of drill results from the current holes, please click

here: http://libertygold.ca/images/sites/default/files/GS_Intercepts11162017.pdf

For a complete table of results for all drilling by Liberty Gold at Goldstrike from 2015 to October 2017,

please click here: http://libertygold.ca/images/sites/default/files/GS_Intercepts2015to11162017.pdf

For a map of drill collars and traces for the current release, please click

here: http://libertygold.ca/images/sites/default/files/GoldStrike_NR2017.pdf

Goldstrike is located in the eastern Great Basin, immediately adjacent to the Utah/Nevada border, and

is a Carlin-style gold system, similar in many ways to the prolific deposits located along Nevada’s Carlin

trend. Like Kinsley Mountain and Newmont’s Long Canyon deposit, Goldstrike represents part of a

growing number of Carlin-style gold systems located off the main Carlin and Cortez trends in

underexplored parts of the Great Basin. The historic Goldstrike Mine operated from 1988 to 1994, with

209,000 ounces of gold produced from 12 shallow pits, at an average grade of 1.2 g/t Au.

Moira Smith, Ph.D., P.Geo., Vice-President Exploration and Geoscience, Liberty Gold, is the Company's designated Qualified Person for this news release within the meaning of National Instrument 43-101

Standards of Disclosure for Mineral Projects ("NI 43-101") and has reviewed and validated that the information contained in the release is accurate. Drill composites were calculated using a cut-off of 0.20 g/t.

Drill intersections are reported as drilled thicknesses. True widths of the mineralized intervals vary between 30 and 100% of the reported lengths due to varying drill hole orientations, but are typically in the

range of 60 to 80% of true width. Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire Assay of a 30 gram (1 assay ton) charge with an AA finish, or if over 5.0 g/t were re-assayed and

completed with a gravimetric finish. For these samples, the gravimetric data were utilized in calculating gold intersections. For any samples assaying over 0.200 ppm an additional cyanide leach analysis is

done where the sample is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final leach solution is then centrifuged and analyzed by AAS. Metallic screen techniques may be

employed where the presence of coarse free gold is suspected. Approximately 1000 grams of coarse reject material are pulverized and screened. Two splits of the fine fraction are assayed, as well as all

material that does not pass through the screen (the coarse fraction). The final gold assay reported is a weighted average of the coarse and fine fractions. QA/QC for all drill samples consists of the insertion

and continual monitoring of numerous standards and blanks into the sample stream, and the collection of duplicate samples at random intervals within each batch. Selected holes are also analyzed for a 51

multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005 Accredited, with the Elko prep lab listed on the scope of accreditation.

Goldstrike is an early-stage exploration project and does not contain any mineral resource estimates as defined by NI 43-101. The potential quantities and grades disclosed herein are conceptual in nature

and there has been insufficient exploration to define a mineral resource for the targets disclosed herein. It is uncertain if further exploration will result in these targets being delineated as a mineral

resource. Further information on Goldstrike is available in the technical report entitled "Technical Report on the Goldstrike Project, Washington County, Utah, U.S.A.", effective April 1, 2016 and dated October

7, 2016, prepared by Michael M. Gustin, C.P.G. and Moira Smith, Ph.D., P.Geo. found at the top of this page or under Liberty Gold's issuer profile in SEDAR ( www.sedar.com).

ABOUT LIBERTY GOLD

Liberty Gold is led by a proven technical and capital markets team that continues to discover and define

high-quality assets. Our flagship property is the Goldstrike Oxide Gold Project in Utah. Liberty also has

a pipeline of projects, including Black Pine in Idaho and Kinsley Mountain in Nevada, providing a solid

platform for future growth. Over the past 5 years, there have been 8 new open-pit, heap leach gold

mines built around the world and the management team and/or directors of Liberty Gold are responsible

for discovering, developing and/or building two of them. Long Canyon in Nevada (Fronteer Gold) and

Karma in Burkina Faso (True Gold) both reached commercial production in 2016.

For more information, visit www.libertygold.ca or contact:

Susie Bell, Manager, Investor Relations

Phone: 604-632-4677 or Toll Free 1-877-632-4677

[email protected]

Page 3 of 3

All statements in this press release, other than statements of historical fact, are "forward-looking information" with respect to Liberty Gold within the meaning

of applicable securities laws, including statements that address potential quantity and/or grade of minerals, potential size and expansion of a mineralized

zone, proposed timing of exploration and development plans. Forward-looking information is often, but not always, identified by the use of words such as

"seek", "anticipate", "plan", "continue", "planned", "expect", "project", "predict", "potential", "targeting", "intends", "believe", "potential", and similar

expressions, or describes a "goal", or variation of such words and phrases or state that certain actions, events or results "may", "should", "could", "would",

"might" or "will" be taken, occur or be achieved. Forward-looking information is not a guarantee of future performance and is based upon a number of

estimates and assumptions of management at the date the statements are made including, among others, assumptions about future prices of gold, and

other metal prices, currency exchange rates and interest rates, favourable operating conditions, political stability, obtaining governmental approvals and

financing on time, obtaining renewals for existing licences and permits and obtaining required licences and permits, labour stability, stability in market

conditions, availability of equipment, accuracy of any mineral resources, the availability of drill rigs, the release of an initial resource report, the completion of

a preliminary economic assessment, successful resolution of disputes and anticipated costs and expenditures. Many assumptions are based on factors and

events that are not within the control of Liberty Gold and there is no assurance they will prove to be correct.

Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future results

expressed or implied by such forward-looking information, including, risks related to the interpretation of results and/or the reliance on technical information

provided by third parties as related to the Company’s mineral property interests; changes in project parameters as plans continue to be refined; current

economic conditions; future prices of commodities; possible variations in grade or recovery rates; the costs and timing of the development of new deposits;

failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform; the timing and success of exploration activities

generally; delays in permitting; possible claims against the Company; labour disputes and other risks of the mining industry; delays in obtaining

governmental approvals, financing or in the completion of exploration as well as those factors discussed in the Annual Information Form of the Company

dated March 28, 2017 in the section entitled "Risk Factors", under Liberty Gold’s SEDAR profile at www.sedar.com.

Although Liberty Gold has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described

in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be

no assurance that such information will prove to be accurate as actual results and future events could differ materially from those anticipated in such

statements. Liberty Gold disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information,

future events or otherwise unless required by law.