Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

LGD.TO ·

Liberty Gold Announces Discovery of a Third High Grade Oxide Gold Zone (D-3) at the Black Pine Project, Idaho, USA 1.98 g/t Au Over 33.5 Metres, Including 3.93 g/t Au Over 15.2 Metres, and 1.11 g/t Au Over 30.5 Metres in LBP127

Drill Results

Page 1 of 5

NEWS RELEASE 20-14 June 23, 2020

Liberty Gold Announces Discovery of a Third High Grade Oxide Gold Zone (D-3) at the

Black Pine Project, Idaho, USA

1.98 g/t Au Over 33.5 Metres, Including 3.93 g/t Au Over 15.2 Metres, and 1.11 g/t Au Over

30.5 Metres in LBP127

VANCOUVER, B.C. – Liberty Gold Corp. (LGD-TSX) (“Liberty Gold” or the “Company”) is pleased

to announce the first drill results from the 2020 drill program at its Carlin-style Black Pine property

in southern Idaho, USA.

A third high grade oxide gold discovery (D -3 Zone) has been discovered in close proximity

to the D -1 and D -2 zone discoveries made in 2019. The D-3 zone lies beneath the limit of

shallow historical drilling in a stratigraphic unit that is modeled to underlie at least the

southern two thirds of the Black Pine gold system. This stratigraphic horizon, the lowest in

the 400 metre (“m”)-thick carbonate sequence that hosts gold mineralization at Black Pine,

is the primary host for gold mined in the historic CD pit, but has only been tested by shallow

drill holes in two other locations on the property.

Reverse Circulation (“ RC”) drilling to the west of the now -amalgamated Discovery 1 and 2 zones

(“D-1” and D -2”) encountered a thick zone of high- grade oxide gold in hole LBP127 below and

laterally adjacent to the historic B pit, where outcropping gold mineralization was mined a t a 1.38

grams per tonne gold (“g/t Au”). LBP127 bottomed in grade, with the last five, 5-foot sample intervals

grading greater than 2 g/t Au. LBP129, drilled 215 m to the north, returned 1.60 g/t Au over 29.0 m,

including 2.09 g/t Au over 19.8 m at the same vertical elevation.

In addition, new drilling in the D-1 / D-2 zones:

• Confirms the extension of oxide gold mineralization at shallow depth in the 400 m-long gap

between the southeast end of the D-1 zone and the Tallman Pit.

• Confirms the presence of oxide gold in a sparsely-drilled area at the transition between D-1

and D-2.

• Extends the D-1 zone an additional 40 m further to the west.

A third drill has been mobilized to the Black Pine Project, and the current exploration program

has been increased from 28,000 m to 46,000 m, exclusive of a core drilling program planned

for later in the season. Liberty Gold is well funded to continue to accelerate its exploration efforts.

“The new D-3 discovery will be drill-defined in the same manner as the D -1 and D-2 discoveries in

2019,” comments Cal Everett, President and CEO of Liberty Gold. “The intercept in LBP127 is the

9th best drill hole that Liberty Gold has drilled to date on a top- to-bottom, grade-times-thickness

basis. The combination of several high-grade oxide gold discoveries in close proximity to each other,

and in association with recently released excellent metallurgy elevates the value of the Black Pine

project. Liberty Gold has increased its land holdings in the project area and have protected our

interests on a district scale. Intercepts like we encountered in LBP127 never tend to occur in

Page 2 of 5

isolation and we are looking forward to drill -testing this new stratigraphic horizon in the D -3

discovery. Two drills are currently focused on and will not wander away from D-3, with a third drill

exploring new targets.”

D-3 DRILL HIGHLIGHTS INCLUDE1:

1A number of mineralized intervals were omitted from this table for brevity. Please refer to the full table at the link below for complete results.

For a cross section of drill collars and traces for the current release, please click

here: https://libertygold.ca/images/news/2020/june/BlackPine_NR06232020CS.pdf

For a map of drill collars and traces for the current release, please click

here: https://libertygold.ca/images/news/2020/june/BlackPine_NR06232020Map.pdf

For a complete table of drill results from all Liberty Gold drill holes at Black Pine, please click

here: https://libertygold.ca/images/news/2020/june/BP_Intercepts06232020.pdf

As presently defined, the D -3 zone is defined by three holes. LBP125 and LBP 129 lie along a 450

m-long, northeast-southwest trending section. The intercept in LBP127 is located 215 m south of

LBP129. This area is currently the focus of drilling offsets to the mineralization in LBP127 and

LBP129 to determine the size of the zone, which is open for extension in all directions.

D-3 Key Points

• LBP127 represents a new discovery (D-3) to the west of the D-1 and D-2 zones, two

new discoveries of high-grade mineralization made in 2019 below the limit of historic

drilling.

• Being located in close proximity to D-1 and D-2, the D-3 zone is accretive to the

overall gold endowment in the northern portion of the Black Pine gold system.

• The new discovery is located in a stratigraphic unit that lies below the unit hosting

high-grade gold mineralization in the D-2 zone. This unit is modeled to underlie the

southern two thirds of the gold system and is the primary host for mineralization

mined in the historic CD pit but has only been tested by historic drill holes in a few

locations.

• The existence of high-grade gold mineralization in this new stratigraphic unit brings

the number of stacked, prospective gold host horizons at Black Pine to three.

Hole ID (Az, Dip)

(degrees)

From

(m)

To

(m)

Intercept

(m)

Au

(g/t)

Au Cut-Off

(g/t)

Hole Length

(m) Target Concept Comments

LBP125 (200, -55) 335.3 345.9 10.7 1.07

and 355.1 365.8 10.7 0.48

LBP127 (60, -58) 224.0 257.6 33.5 1.98 0.2

incl 239.3 254.5 15.2 3.93 1

and 263.7 294.1 30.5 1.11 0.2

incl 286.5 294.1 7.6 2.39 1

LBP129 (15, -65) 65.5 80.8 15.2 0.41

and 222.5 228.6 6.1 0.73

and 240.8 269.7 29.0 1.60

incl 243.8 263.7 19.8 2.09 1

0.2 339.9 D-3

294.1 D-3

Hole lost; last five assay intervals

returne > 2 g/t Au: no recovery in some

of the lower interval (assigned 0 grade)

0.2 365.8 D-3 Hole ended in mineralization

Page 3 of 5

• Cyanide-soluble assays for the highlight intervals have a weighted average 94% and

87% (upper and lower highlight intervals in LBP127) and 97% (highlight interval in

LBP129), respectively, attesting to the oxidized nature of gold mineralization.

• In terms of mineral endowment, LBP127 ranks as the 9th best hole Liberty Gold has

drilled to date in terms of top-to-bottom grade-times-thickness, despite bottoming in

over 2 g/t Au, and the best hole historically drilled into this new stratigraphic horizon

across the property.

D-1 Southeast Extension

Three holes in this release targeted, and confirmed, the presence of shallow oxide gold

mineralization in a 400 m -long, untested gap between the south end of the historic B Pit and the

historic Tallman Pit. This extends the 1 kilometre (“km”)-long D-1 zone an additional 0.5 km to

the southeast. Additional drilling is planned for this area to further drill off the gold mineralization.

D-1 SOUTHEAST EXTENSION HIGHLIGHTS INCLUDE1:

1A number of mineralized intervals were omitted from this table for brevity. Please refer to the full table at the link below for complete results.

D-2 to D-1 Transition and D-2 Infill

Four holes were drilled into gaps in the drilling pattern at the southwest end of the D -2 zone and

transitional into the D -1 zone. All holes returned significant intervals of oxide gold, i ncluding

multiple intervals grading greater than 1 g/t Au in LBP111. LBP115 tested the D-1 zone along

the projected trend of D-2, extending mineralization an additional 40 m to the southwest.

Hole ID (Az, Dip)

(degrees)

From

(m)

To

(m)

Intercept

(m)

Au

(g/t)

Au Cut-Off

(g/t)

Hole Length

(m) Target Concept Comments

LBP124 (250, -65) 85.3 123.4 38.1 0.39 0.2 208.8 B Pit to Tallman Pit (D-1 SE extension)

LBP126 (150, -65) 70.1 83.8 13.7 0.44 0.2

and 131.1 160.0 29.0 0.54 0.2

incl. 150.9 153.9 3.0 1.54 1

LBP128 (90, -65) 64.0 85.3 21.3 0.31

and 155.4 173.7 18.3 0.59

incl 164.6 169.2 4.6 1.42 1

0.2 213.4 B Pit to Tallman Pit (D-1 SE extension)

208.8 B Pit to Tallman Pit (D-1 SE extension)

Page 4 of 5

D-2 to D-1 TRANSITION HIGHLIGHTS1:

1A number of mineralized intervals were omitted from this table for brevity. Please refer to the full table at the link below for complete results.

RC drilling is ongoing at Black Pine, with three drill rigs currently operating, testing new targets and

expanding on the focused drilling carried out in 2019 over much of the 7.3 km 2 permit area. In

addition to drilling, Liberty Gold is expanding the permit area to include an additional 4. 6 km2.

Metallurgical column testing is ongoing, with a second metallurgical release from core sampling

expected in Q3.

ABOUT BLACK PINE

Black Pine is located in the northern Great Basin, immediately adjacent to the Utah/Idaho border. It

is a Carlin-style gold system, similar in many ways to the prolific deposits located along Nevada’s

Carlin trend. Like Newmont’s Long Canyon deposit, Black Pine represents a growing number of

Carlin-style gold systems located off the main Carlin and Cortez trends in underexplored parts of the

Great Basin. The historic Black Pine Mine operated from 1992 to 1997, during a period of historically

low gold prices, with 435,000 ounces of gold produced from five composite, shallow pits.

A virtual site tour and 3D model of Black Pine property, including details about the geology and

mineralization, is available on the homepage of the Company’s website, www.libertygold.ca.

A Technical Report is also available on the Company

website: https://libertygold.ca/images/pdf/BlackPine_NI43-101_2018.pdf

Moira Smith, Ph.D., P.Geo., Vice-President Exploration and Geoscience, Liberty Gold, is the Company's designated Qualified Person for this news release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101")

and has reviewed and validated that the information contained in the release is accurate. Drill composites were calculated using a cut-off of 0.20 g/t. Drill intersections are reported as drilled thicknesses. True widths of the mineralized intervals vary between 30 and

Hole ID (Az, Dip)

(degrees)

From

(m)

To

(m)

Intercept

(m)

Au

(g/t)

Au Cut-Off

(g/t)

Hole Length

(m) Target Concept Comments

LBP107 (90, -83) 196.6 207.3 10.7 0. 53

and 239.3 253.0 13.7 0.96

and 262.1 283.5 21.3 0.92

incl 268.2 274.3 6.1 2.17 1

LBP109 (235, -71) 169.2 175.3 6.1 0.65

and 196.6 221.0 24.4 0.58

incl 214.9 219.5 4.6 1.24

and 249.9 265.2 15.2 0.66

and 297.2 301.8 4.6 1.41

and 307.8 312.4 4.6 1.32

LBP111 (93, -65) 68.6 97.5 29.0 0.45

and 179.8 201.2 21.3 1.27

and 237.7 245.4 7.6 0.94

and 265.2 285.0 19.8 0.74

incl 271.3 275.8 4.6 1.52 1

and 318.5 324.6 6.1 2.17

and 330.7 333.8 3.0 3.05

LBP113 (120, -75) 10.7 19.8 9.1 0.43

and 94.5 109.7 15.2 0.58

and 202.7 207.3 4.6 0.76

and 243.8 253.0 9.1 1.12

LBP115 (300, -80) 27.4 82.3 54.9 0.32

and 204.2 263.7 59.4 0.65

incl 259.1 262.1 3.0 2.21 1

and 271.3 285.0 13.7 0.62 0.2

0.2

361.2

0.2 312.4 D-2 Infill

0.2 330.7 D-1 to D-2 Transition

0.2 324.6 D-2 Infill

D-1 Step Out

0.2

342.9 D-1 to D-2 Transition

0.2

Page 5 of 5

100% of the reported lengths due to varying drill hole orientations but are typically in the range of 60 to 80% of true width. Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire Assay of a 30 gram (1 assay ton) charge with an AA finish, or if

over 5.0 g/t were re-assayed and completed with a gravimetric finish. For these samples, the gravimetric data were utilized in calculating gold intersections. For any samples assaying over 0.200 ppm an additional cyanide leach analysis is done where the sample

is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final leach solution is then centrifuged and analyzed by Atomic Absorption Spectroscopy. QA/QC for all drill samples consists of the insertion and continual monitoring of numerous

standards and blanks into the sample stream, and the collection of duplicate samples at random intervals within each batch. Selected holes are also analyzed for a 51 multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005

Accredited, with the Elko prep lab listed on the scope of accreditation.

ABOUT LIBERTY GOLD

Liberty Gold is focused on exploring the Great Basin of the United States, home to large-scale gold

projects that are ideal for open-pit mining. This region is one of the most prolific gold-producing

regions in the world and stretches across Nevada and into Idaho and Utah. We know the Great

Basin and are driven to discover and advance big gold deposits that can be mined profitably in

open-pit scenarios. Our flagship projects are Black Pine in Idaho and Goldstrike in Utah, both

past- producing open-pit mines, where previous operators only scratched the surface.

For more information, visit www.libertygold.ca or contact:

Susie Bell, Manager, Investor Relations

Phone: 604-632-4677 or Toll Free 1-877-632-4677

[email protected]

All statements in this press release, other than statements of historical fact, are "forward-looking information" with respect to Liberty Gold within the

meaning of applicable securities laws, including statements regarding the receipt of proceeds from the Transaction and that address potential

quantity and/or grade of minerals. Forward-looking information is often, but not always, identified by the use of words such as "seek", "anticipate",

"plan", "continue", "planned", "expect", "project", "predict", "potential", "targeting", "intends", "believe", "potential", and similar expressions, or

describes a "goal", or variation of such words and phrases or state that certain actions, events or results "may", "should", "could", "would", "might" or

"will" be taken, occur or be achieved. Forward-looking information is not a guarantee of future performance and is based upon a number of

estimates and assumptions of management at the date the statements are made including, among others, assumptions about future prices of gold,

and other metal prices, currency exchange rates and interest rates, favourable operating conditions, political stability, obtaining governmental

approvals and financing on time, obtaining renewals for existing licenses and permits and obtaining required licenses and permits, labour stability,

stability in market conditions, the impact from the pandemic of the novel coronavirus (COVID-19), availability of equipment, accuracy of any mineral

resources, the availability of drill rigs, successful resolution of disputes and anticipated costs and expenditures. Many assumptions are based on

factors and events that are not within the control of Liberty Gold and there is no assurance they will prove to be correct.

Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future

results expressed or implied by such forward-looking information, including, risks related to the interpretation of results and/or the reliance on

technical information provided by third parties as related to the Company’s mineral property interests; changes in project parameters as plans

continue to be refined; current economic conditions; future prices of commodities; possible variations in grade or recovery rates; the costs and

timing of the development of new deposits; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform;

the timing and success of exploration activities generally; delays in permitting; possible claims against the Company; labour disputes and other risks

of the mining industry, including impacts from the pandemic of the novel coronavirus (COVID-19); delays in obtaining governmental approvals,

financing or in the completion of exploration as well as those factors discussed in the Annual Information Form of the Company dated March 26,

2020 in the section entitled "Risk Factors", under Liberty Gold’s SEDAR profile at www.sedar.com. Although Liberty Gold has attempted to identify

important factors that could cause actual actions, events or results to differ materially from those described in forward-looking information, there may

be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that such

information will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Liberty

Gold disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events

or otherwise unless required by law.