Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

LG.V ·

Lahontan Drills Thick, Shallow Oxide GOLD at WEST Santa Fe: 55m Grading 1.00 G/T AuEq Including 17m Grading 1.75 G/T AuEq

Drill Results

217 Queen Street West, Suite 401, Toronto, ON M5V 0R2 www.lahontangoldcorp.com

NEWS RELEASE

LAHONTAN DRILLS THICK, SHALLOW OXIDE GOLD AT WEST SANTA FE: 55m

GRADING 1.00 g/t AuEq INCLUDING 17m GRADING 1.75 g/t AuEq

Toronto Ontario, February 5, 2026 – Lahontan Gold Corp. (TSXV:LG, OTCQB:LGCXF, FSE:Y2F)

(the "Company" or "Lahontan") is pleased to announce the first assay results from our 2025 Maiden

drilling program at the Company’s satellite West Santa Fe Project, located only 13 km from Lahontan’s

flagship Santa Fe Mine Project in Nevada’s prolific Walker Lane. The first assay results for the first of six

reverse-circulation rotary (“RC”) drill holes (totaling 593 metres) completed at West Santa Fe are

summarized below. Additional drill results are expected shortly.

• WSF25-06R: 54.9 metres (24.4 – 79.3m) grading 1.00 g/t Au Eq including 16.8 metres (27.4 –

44.2m) grading 1.75 g/t Au Eq: A shallow, thick, intercept of oxide gold mineralization

confirming gold and silver mineralization reported in historic drill holes

- The intercepts reported above, and in the table below, are the down-hole depths.

WSF25-06R was drilled at an inclination of -50 degrees, therefore the intercept

begins at a depth from the surface of only 19 metres.

- West Santa Fe is a silver-rich system as shown below; individual silver intercepts range

up to 176 g/t Ag (1.52m, 28.96 – 30.48m).

Notes: Au Eq equals Au (g/t) + ((Ag g/t/ 60)*0.70). Silver grade for calculating Au Eq is adjusted to consider estimated

metallurgical recovery reported by Kappes Cassiday (1982). True thickness of the intercepts is estimated to be 80-100% of the

drilled interval. Numbers may not total precisely due to rounding.

Kimberly Ann, Lahontan Executive Chair, President, CEO, and Founder commented: “ The first assay

results from our Maiden RC drilling campaign at West Santa Fe are particularly encouraging as the intervals

drilled correspond to gold and silver mineralized zones identified in historic drilling. Our data base contains

information on 171 drill holes totaling over 13,000 metres, validating this data base for use in future Mineral

Resource Estimates is an important step in advancing West Santa Fe. Its proximity to the Santa Fe Mine

makes the project an important part of the Company’s strategy to grow gold and silver mineral resources

that could potentially be exploited utilizing future mineral processing infrastructure at Santa Fe.”

Internal Lahontan grade modeling of the historic drilling suggests that the potential exists for a shallow,

oxidized, disseminated gold and silver deposit at West Santa Fe. Most of the previous exploration drilling

took place between 1980 and 1985, with sporadic additional drilling in the 1990s. Importantly, considerable

amount of metallurgical test work has been completed on the project including cyanide column leach tests

and conventional grinding with CIP precious metal recovery. In a summary report (dated September 20,

1982) reviewing all the available metallurgical test data, Kappes Cassiday and Associates concluded “a

cyanide heap leach process will yield an overall recovery of 70% of contained gold and 50% of contained

silver. The process will include crushing to below one inch and agglomeration.” The 1982 metallurgical

results mentioned above are historical in nature and were compiled from reports in the E & B Exploration

Total

Depth (m)

Azimuth,

InclinationFrom (m)To (m) Interval

(m) Au (g/t)Ag (g/t)Au Eq (g/t)Metallurgical

Domain Target/Notes

WSF25-06R 105.2 155, -50 24.4 79.3 54.9 0.52 40.5 1.00 Oxide

Including: 27.4 44.2 16.8 0.85 76.4 1.75 Oxide

Also including: 64.0 77.7 13.7 0.70 52.2 1.32 Oxide

North Zone, twin historic drilling

217 Queen Street West, Suite 401, Toronto, ON M5V 0R2 www.lahontangoldcorp.com

archives. While these results suggest high recovery rates, a Qualified Person has not verified this data

against modern standards. Therefore, these results should be considered illustrative of the potential of the

property only and not relied upon as a cur rent, verified, or representative estimate of recovery. The

Company anticipates that additional metallurgical test work will be required to verify the historic data.

Cross section through drill hole WSF25-06R, West Santa Fe project, Nevada. The results from this drill hole compare favorably

with historic drilling, both in the tenor of mineralization and the geometry. The results in part validate the historic drill hole data

and together, demonstrate that gold and silver mineralization is open down-dip to the north-northwest.

Drill hole location map for WSF25-06R, West Santa Fe Project, Nevada. The surface projection of known mineralization based

on historic drilling is shown in red. Proximity to the Santa Fe Mine project is highlighted by the inset map.

WSF25-06R

TD 105.2m

25m wide slice

North-Northwest East-Southeast

54.9m @ 0.52g/t Au, 40.5g/t Ag from 24.4m

Including 16.8m @ 0.85g/t Au, 76.4g/t Ag from 27.4m

Also Including 13.7m @ 0.70g/t Au, 52.2g/t Ag from 64.0m

Strongest Mineralization Associated with

Quartz Veins and Gossan Alteration

Au (ppm)

Northern Zone at West Santa Fe, 2025 Hole Twinning Historic Drilling

Historic Hole: 67.1m @ 0.59g/t Au, 31.8g/t Ag from 27.4m

Including 24.4m @ 0.77g/t Au, 46.8g/t Ag from 27.4m

Also Including 15.24m @ 1.21g/t Au, 49.9 g/t Ag from 60.96m

217 Queen Street West, Suite 401, Toronto, ON M5V 0R2 www.lahontangoldcorp.com

Gold and silver mineralization at West Santa Fe is hosted by fine to medium grained limestone of the

Triassic Pamlico Formation. In drill cuttings and on the surface, mineralized intervals are characterized

by abundant iron oxides, mainly Goethite and Hematite, minor quartz veining, and weak to moderate de-

calcification. Bedding and fault structures are important controls to higher grade gold and silver

mineralization. The overall geologic setting of the system is very similar to the Santa Fe Mine project

gold and silver deposits.

QA/QC Protocols

Lahontan conducts an industry standard QA/QC program for its core and RC drilling programs. The QA/QC

program consisted of the insertion of coarse blanks and Certified Reference Materials (CRM) into the

sample stream at random intervals. The targeted rate of insertion was one QA/QC sample for every 16 to

20 samples. Coarse blanks were inserted at a rate of one coarse blank for every 65 samples or approximately

1.5% of the total samples. CRM’s were inserted at a rate of one CRM for every 20 samples or approximately

5% of the total samples.

The standards utilized include three gold CRM’s and one blank CRM that were purchased from MEG, LLC

of Lamoille, Nevada (formerly Shea Clark Smith Laboratories of Reno, Nevada). Expected gold values are

0.188 g/t, 1.107 g/t, 10.188 g/t, and -0.005 g/t, respectively. CRM’s with similar grades are inserted as the

initial CRM’s run out. The coarse blank material comprised of commercially available landscape gravel

with an expected gold value of -0.005 g/t.

As part of the RC drilling QA/QC process, duplicate samples were collected of every 20th sample interval

at the drill rig to evaluate sampling methodology. Samples were collected from the reject splitter on the

drill rig cyclone splitter. Samples were collected at each 95- to 100-foot (28.96 - 30.48m) mark and labeled

with a “D” suffix on the sample bag. No duplicates were submitted for core.

All drill samples were sent to American Assay Laboratories (AAL) in Sparks, Nevada, USA for analyses.

Delivery to the lab was either by a Lahontan Gold employee or by an AAL driver. Analyses for all RC and

core samples consisted of Au analysis using 30-gram fire assay with ICP finish, along with a 36-element

geochemistry analysis performed on each sample utilizing two acid digestion ICP-AES method. Tellurium

or 50-element analyses were performed on select drill holes utilizing ICP-MS method. Cyanide leach

analyses, using a tumble time of 2 hours and analyzed with ICP-AES method, were performed on select

drill holes for Au and Ag recovery. AAL inserts their own blanks, standards and conducts duplicate analyses

to ensure proper sample preparation and equipment calibration. We have all results reported in grams per

tonne (g/t).

About Lahontan Gold Corp.

Lahontan Gold Corp. is a Canadian mine development and mineral exploration company that holds,

through its US subsidiaries, four gold and silver exploration properties in the Walker Lane of mining

friendly Nevada. Lahontan’s flagship property, the 28.3 km2 Santa Fe Mine project, had past production

of 359,202 ounces of gold and 702,067 ounces of silver between 1988 and 1995 from open pit mines

utilizing heap-leach processing. The Santa Fe Mine has a Canadian National Instrument 43-101 compliant

Indicated Mineral Resource of 1,539,000 oz Au Eq (48,393,000 tonnes grading 0.92 g/t Au and 7.18 g/t

Ag, together grading 0.99 g/t Au Eq) and an Inferred Mineral Resource of 411,000 oz Au Eq (16,760,000

grading 0.74 g/t Au and 3.25 g/t Ag, together grading 0.76 g/t Au Eq), all pit constrained (Au Eq is

inclusive of recovery, please see Santa Fe Project Technical Report and note below*). The Company plans

to continue advancing the Santa Fe Mine project towards production, update the Santa Fe Preliminary

Economic Assessment, and drill test its satellite West Santa Fe project during 2025. For more information,

please visit our website: www.lahontangoldcorp.com

* Please see the “Preliminary Economic Assessment, NI 43-101 Technical Report, Santa Fe Project”, Authors: Kenji Umeno, P.

Eng., Thomas Dyer, PE, Kyle Murphy, PE, Trevor Rabb, P. Geo, Darcy Baker, PhD, P. Geo., and John M. Young, SME-RM;

217 Queen Street West, Suite 401, Toronto, ON M5V 0R2 www.lahontangoldcorp.com

Effective Date: December 10, 2024, Report Date: January 24, 2025. The Technical Report is available on the Company’s website

and SEDAR+. Mineral resources are reported using a cut-off grade of 0.15 g/t AuEq for oxide resources and 0.60 g/t AuEq for

non-oxide resources. AuEq for the purpose of cut-off grade and reporting the Mineral Resources is based on the following

assumptions gold price of US$1,950/oz gold, silver price of US$23.50/oz silver, and oxide gold recoveries ranging from 28% to

79%, oxide silver recoveries ranging from 8% to 30%, and non-oxide gold and silver recoveries of 71%.

Qualified Person

Brian J. Maher, M.Sc., CPG-12342, is a “Qualified Person” as defined under Canadian National Instrument

43-101, Standards of Disclosure for Mineral Projects, and has reviewed and approved the content of this

news release in respect of all technical disclosure other than the Mineral Resource Estimate as noted above.

Mr. Maher is Vice President-Exploration for Lahontan Gold and has verified the data disclosed in this news

release, including the sampling, analytical and test data underlying the disclosure.

On behalf of the Board of Directors

Kimberly Ann

Founder, CEO, President, and Director

FOR FURTHER INFORMATION, PLEASE CONTACT:

Lahontan Gold Corp.

Kimberly Ann

Founder, Chief Executive Officer, President, Director

Phone: 1-530-414-4400

Email:

[email protected]

Website: www.lahontangoldcorp.com

Cautionary Note Regarding Forward-Looking Statements:

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture

Exchange) accepts responsibility for the adequacy or accuracy of this release. Except for statements of historical fact, this news

release contains certain "forward-looking information" within the meaning of applicable securities law. Forward-looking

information is frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate",

"estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur. Forward-looking

statements are based on the opinions and estimates at the date the statements are made and are subject to a variety of risks and

uncertainties and other factors that could cause actual events or results to differ materially from those anticipated in the forward-

looking statements including, but not limited to delays or uncertainties with regulatory approvals, including that of the TSXV.

There are uncertainties inherent in forward-looking information, including factors beyond the Company’s control. The

Company undertakes no obligation to update forward-looking information if circumstances or management's estimates or

opinions should change except as required by law. The reader is cautioned not to place undue reliance on forward-looking

statements. Additional information identifying risks and uncertainties that could affect financial results is contained in th e

Company’s filings with Canadian securities regulators, which filings are available at www.sedar.com