Legacy GOLD Hits 5.3 G/T GOLD over 10FT (3M) Extending Zones 164M WEST; 0.66 G/T GOLD over 40FT (12.2M) Extending Zones 136M North; 6.7 G/T GOLD over 15FT (4.6M) IN Twin Hole at Baner Property, Idaho
1
www.legacygoldmines.com
TSX Venture: LEGY
LEGACY GOLD HITS 5.3 G/T GOLD OVER 10FT (3M) EXTENDING ZONES 164M
WEST; 0.66 G/T GOLD OVER 40FT (12.2M) EXTENDING ZONES 136M NORTH;
6.7 G/T GOLD OVER 15FT (4.6M) IN TWIN HOLE AT BANER PROPERTY, IDAHO
Calgary, Canada February 19, 2026
Legacy Gold Mines Ltd. (TSXV: LEGY) (the “ Company” or “ Legacy Gold”) is pleased to report
assay results from the final four (4) Reverse Circulation (RC) drill holes from its 2025 surface
exploration program on the Baner Gold Mine Property (the “Property”), in Idaho County, Idaho, USA,
which is optioned by the Company . The latest resu lts returned multiple intersections targeting the
northern portion of the previously drilled Main Zone on the Property (see Figures below).
“Of the 16 R/C holes drilled last year, 12 returned notable widths of gold mineralization, and we are still
awaiting the final set of assays,” said Brian Hinchcliffe, Legacy Gold’s CEO. “The Baner property is located
in Idaho’s Orogrande mining district, and Legacy Gold’s 2026 drill campaign will continue to confirm and
expand upon the previous drilling carried out by Champion Electric, from whom we have optioned the
Property.”
“Legacy Gold has achieved all of its original goals for the 2025 drill program,” said Mike Sutton, Legacy
Gold’s Vice President, Exploration. “We’ve intersected very wide zones such as 0.50 g/t Au over 108.2m
(355ft), high-grade zones such as 6.7 g/t Au over 4.6m (15ft) within 1.2 g/t Au over 39.6m (130ft),
expanded the gold system in multiple directions, identified strong evidence supporting the new
interpretation of flatter dips, proved continuity of high-grade mineralization, and even intersected wide
zones perpendicular to the main trend (at Baner Mine proper). The deposit is open in every direction.”
Highlights of Drilling:
• LG25-010 intersected 1.2 g/t Au over 39.6m (130ft) including 6.7 g/t Au over 4.6m (15ft) (with
no sampling before a 1.2 g/t Au over 1.5m (5ft)); plus 0.74 g/t Au over 21.3m (70ft) including 2.4
g/t Au over 7.6m (25ft); plus 0.46 g/t Au over 13.7m (45ft) including 0 g/t Au over 6.1m (20ft) and
including 1.45 g/t Au over 1.5m (5ft); hole LG25-010 zones are open to the east.
• LG25-006 intersected 0.66 g/t Au over 12.2m (40ft) including 1.4 g/t Au over 1.5m (5ft); plus
0.25 g/t Au over 15.2m (50ft) including 0.78 g/t Au over 1.5m (5ft).
• LG25-016 intersected 1.45 g/t Au over 13.7m (45ft), including 3.7 g/t Au over 1.5m (5ft); plus
5.26 g/t Au over 3.0m (10ft); plus 0.44 g/t Au over 13.7m (45ft).
• LG25-014 intersected 0.23 g/t Au over 10.7m (35ft).
• With infill assays, LG25-004 intersected 0.59 g/t Au over 71.6m (235ft) *, including 1.83 g/t Au
over 1.5m (5ft) and 1.22 g/t Au over 1.5m (5ft), plus 0.71 g/t Au over 42.7m (140ft),** including
2.4 g/t Au over 7.6m (25ft)
• With infill assays, LG25-001 intersected 0.56 g/t Au over 39.6m (130ft),** plus 0.31 g/t Au over
41.1m (135ft).**
• With infill assays, LG25-002 intersected 0.50 g/t Au over 108.2m (355ft),** including 1.30 g/t Au
over 9.1m (30ft), and 1.5 g/t Au over 1.5m (5ft) and 1.1 g/t Au over 1.5m (5ft) and 1.3 g/t Au over
1.5m (5ft); plus 0.47 g/t Au over 6.1m (20ft),* and ended in mineralization at a vertical depth of
120m (see Legacy Gold’s press release dated October 16, 2025)
• See Assay Results table below for additional intercepts. See also Figures 1-5.
Notes:
* previously released.
** infill sampling has changed previously released intersection.
2
High Grade and Continuity of High Grades
High grades have been intersected in many 2025 holes, including assays of 13.0 g/t Au over 1.5m (5ft)
in hole LG25-003, 11.3 g/t Au over 1.5m (5ft) in hole LG25-010, and 10.0 g/t Au over 1.5m (5ft) in
hole LG25-016.
Hole LG25-016, with a previously reported 6.0 g/t Au over 1.5m (5ft) (within 4.6 g/t Au over 3.0m
(10ft) which is within 1.18 g/t Au over 24.4m (80ft) ), is located 20 m southeast of and below an
intersection of LG25-010’s intersection of 11.3 g/t Au over 1.5m (5ft) within 6.7 g/t Au over 4.6m (15ft)
which is within 1.2 g/t Au over 39.6m (130ft) and 20m southeast of and below an intersection (from
previous operators) of 16.3 g/t Au over 0.3m (1.0ft) within 4.8 g/t Au over 5.9m (19.4ft) from hole
ICG2018-16 (drilled by Idaho Champion, see Technical Report (defined below) for additional
information). The hole LG25-010 and ICG2018-16 high-grade intersections are 3.0m apart and both
are 20m up-dip at the same elevation as the 6.0 g/t Au over 1.5m. The 3 intersections show very good
correlation, and continuity.
Using RC necessitates taking far bigger samples than the previous drilling with core (generally 5ft vs.
1.0ft/1.5ft), so obviously not as many high grades would be forthcoming. The previous core drilling
returned 37 assays greater than 5.0 g/t Au.
Expansion of the Gold System in Multiple Directions
Legacy Gold undertook a 50m line soil survey that dove-tailed with the previous 200m line survey. It
targeted high-grade gold anomalies along structural trends. Hole LG25-006 has intersected 0.66 g/t
Au over 12.2m (40ft) at 136m northwest of the closest drilling. A soil anomaly extends more than
2,000m further northwest along the drilled trend and is co-incident with a similar magnetic anomaly to
the Main Zone plus a strong I.P . conductor. This has big implications for the gold endowment of the
Property if mineralization persists through this area because the 800m of consistently -mineralized
drilled zones could continue for another 2 ,000m in that one direction (and more in several other
directions). See Figure 6.
Holes LG25-016 and LG25-014 intersected 5.26 g/t Au over 3.0m (10ft) and 0.23 g/t Au over 10.7m
(35ft) near surface at 164m up-hill from the closest drilling intercept. Surface gold soils are anomalous
to here and at least another 163m up-dip. Hole LG25-016 also intersected 1.45 g/t Au over 13.7m
(45ft) at 68m up-dip of the closest intersection, an intersection (from previous operators) of 8.7 g/t Au
over 6.3m (20.7ft), including 146.7 g/t Au over 0.3m (1ft) from hole ICG2018-18. These intersections
prove that there is mineralization, in a likely flat-dipping system, running all the way up the hill.
There exists a big soil anomaly in the SW of the Property which looks larger than the Main Zone soil
anomaly; it has never been drilled but considerable placer gold was dredged with a ship from Crooked
Creek abutting its east side.
The gold system is open in all directions.
Wide Zones
Three of the four main drilled areas have intersected very wide lower-grade intersections to the south
such as 0.59 g/t Au over 71.6m (235ft) in hole LG25-004; 0.50 g/t Au over 108.2m (355ft) in hole
LG25-002; and 0.32 g/t Au over 88.4m (290ft) in hole LG25-005 (see the Company’s November 17,
2025 press release plus infill new intersections in this press release). The total width of mineralization
in holes to date include 235ft in hole LG25-001, plus 123m (405ft) in hole LG25-002, plus 75m (245ft)
in hole LG25-003, plus 145m (475ft) in hole LG25-004 and 117m (385ft) in hole LG25-005. Importantly,
the waste to mineralization appears to be far less than 1:1 (e.g. 0.26:1 in hole LG25-005).
3
New Interpretation Correct - Strong Evidence
The 2025 Baner Drill Program focused on testing for continuity of high-grade and wide low-grade zones
of gold mineralization with a new flatter, east dipping interpretation of zones. This new interpretation is
reflective of all the other deposits in the area, as opposed to the vertical dip assumed by previous
operators, where mineralization is controlled by major structures that acted as conduits for gold-bearing
fluids. This would result in better continuity of mineralization, a far greater potential resource, and the strip
ratio in a production scenario would be greatly decreased. Intersections have been returned at expected
locations in keeping with the interpretation.
Wide Zones Perpendicular to the Main Trend (at Baner Mine proper)
Intersections are along one of the 3 mineralization systems on the Property. A textbook shear system
is interpreted to be present, similar to many deposits worldwide. There are 3 main orientations to zones
- steep north -south along the main structures, flat dipping east -dipping riedel shear -related
mineralization (like the Main Zone), and east -west veins (like the Baner vein system). We’ll find out
which of the orientations holes LG25-001 and LG25-002 are, once follow-up diamond drilling takes
place. The results from holes LG25-001 and LG25-002 (to date, LG25-001: 0.56 g/t Au over 39.6m
(130ft), plus 0.31 g/t Au over 41.1m (135ft); and LG25-002: 0.50 g/t Au over 108.2m (355ft), plus 0.47
g/t Au over 6.1m (20ft) plus several other zones) are likely along the east -west mineralized system
surrounding the Baner Veins where numerous adits and shafts are located along 3,000 ft horizontal
length. Holes LG25-001 and LG25-002 were expected to only return narrow, higher-grade intercepts
similar to what was mined, but very wide intersections were returned.
Infill Assays
The Company approached this 2025 drill program with financial prudency and made the decision to initially
only sample sections where there were quartz veining or low sulphides. Given the results to date, the
Company has opted to sample all sections of all the holes drilled in this 2025 drill campaign and the assay
results will be published upon receipt.
Initial assays from additional samples , not originally visibly, but thought to be as mineralized as the
rest have returned significant grades such as:
• LG25-002: 0.31 g/t Au over 7.6m (25ft) plus 0.27 g/t Au over 6.1m (20ft), requires additional
infill.
• LG25-004: 0.37 g/t Au over 24.4m (80ft) - still open - 0.75 g/t Au over 1.5m (5ft).
• LG25-007: 0.56 g/t Au over 4.6m (15ft).
• LG25-001: 0.21 g/t Au over 7.6m (25ft), requires additional infill for all zones.
Individual g/t Au assays at the start or end of intersections that are open (no assay back yet for next
sample) include (all 1.5m (5ft) samples): 3.7, 1.5, 1.3, 1.2, 0.9, 0.75, 0.66, 0.65, 0.53, 0.5, 0.5, and 15
others greater than 0.2 and less than 0.5.
Discussion of Results
LG25-010 was designed to twin hole ICG2018-16 which had intersections of (in order down-hole):
• 0.46 g/t Au over 12.0m (39.4ft);
• 0.6 g/t Au over 12.5m (41.0ft), including 1.65 g/t Au over 2m (6ft);
• 3.7 g/t Au over 5.3m (17.4ft), including 18.8 g/t Au over 1.0m (0.3ft);
• 1.5 g/t Au over 10.2m (33.5ft), including 9.7 g/t Au over 0.5m (1.6ft), 9.4 g/t Au over 0.6m (2ft),
7.8 g/t Au over 0.5m (1.6ft); and
• 4.8 g/t Au over 5.9m (19.4ft), including 16.3 g/t Au over 0.3m (1.0ft).
Hole LG25-010 intersected 1.2 g/t Au over 39.6m (130ft) including 6.7 g/t Au over 4.6m (15ft) plus 0.74
g/t Au over 18.3m (60ft) plus 0.46 g/t Au over 13.7m (45ft). The 6.7 g/t Au over 4.6m (15ft) corresponds
4
to the 4.8 g/t over 5.9m and is ~3m NE of it at the same elevation. Both correlate with previously -
released 4.6 g/t Au over 3.0m at 20m down-dip and SE in hole LG25-012 (1.18 g/t Au over 24.4m
(80ft), including 4.64 g/t Au over 3.0m (10ft) which includes 6.0 g/t Au over 1.5m (5ft ), and including
4.9 g/t Au over 1.5m (5ft)). Continuity of high-grade mineralization is very good. The 0.74 g/t Au over
21.3m (70ft) correlates with the 0.6 g/t Au over 12.5m (41ft). The other 2 zones are awaiting assays.
LG25-016 was designed to see if mineralization is present up-hill and with a shallow east dip from an
intersection of 8.7 g/t Au over 6.3m (20.7ft), including 146.7 g/t Au over 0.3m (1ft) from hole ICG2018-
181. It successfully proves both with three separate zones intersected of 1.45 g/t Au over 13.7m (45ft),
plus 5.26 g/t Au over 3.0m (10ft) plus 0.44 g/t Au over 13.7m (45ft) . Hole LG25-016 also was
designed to intersect a wide highly oxidized zone visible at the end of hole 14 but was stopped short
of that target.
LG25-015 was designed to intersect a vertical structure trenched on surface at the collar of hole 7. The
hole could not be completed to that depth with the RC rig. It is thought the hole drilled parallel to
mineralization on either side but in a waste gap.
LG25-014 was a steep sub-vertical hole designed to intersect any flat-dipping zones as far west as
possible. It intersected 0.23 g/t Au over 10.7m (35ft), and this represents the furthest west
mineralization has been encountered by drilling. Assays are awaited for a very oxidized wide zone at
the end of the hole. The 0.23 g/t Au over 10.7m (35ft) and the 5.22 g/t Au over 3.0m (10ft) in hole
LG25-016 suggest a west or southwest dip to that zone which is opposite to the rest of the intersections
that suggest an east dip- this could mean folding is present.
Note 1: These intercepts were drilled by Idaho Champion Gold, see Technical Report (defined below) for additional
information.
Table 1: 2025 Baner Drill Program - Assay Results
Hole ID From To Intercept From To Intercept Au
(m) (m) (m) (ft) (ft) (ft) (g/t)
LG25-006 0.0 15.2 15.2 0 50 50 0.25
including 0.0 1.5 1.5 0 5 5 0.78
15.2 51.8 36.6 50 170 120 NS
51.8 64.0 12.2 170 210 40 0.66
including 53.3 54.9 1.5 175 180 5 1.4
68.6 70.1 1.5 225 230 5 0.27
70.1 79.2 9.1 230 260 30 NS
93.0 129.5 36.6 305 425 120 NS
134.1 155.4 21.3 440 510 70 NS
160.0 185.9 25.9 525 610 85 NS
193.5 214.9 21.3 635 705 70 NS
LG25-010 0.0 9.1 9.1 0 30 30 NS
19.8 35.1 15.2 65 115 50 NS
36.6 50.3 13.7 120 165 45 0.46
including 38.1 39.6 1.5 125 130 5 1.45
including 41.1 47.2 6.1 135 155 20 NS
48.8 50.3 1.5 160 165 5 1.05
57.9 73.2 15.2 190 240 50 NS
76.2 94.5 18.3 250 310 60 0.74
including 77.7 79.2 1.5 255 260 5 1.8
including 86.9 88.4 1.5 285 290 5 1.7
96.0 108.2 12.2 315 355 40 NS
112.8 118.9 6.1 370 390 20 NS
118.9 158.5 39.6 390 520 130 1.18
including 128.0 132.6 4.6 420 435 15 6.7
including 131.1 132.6 1.5 430 435 5 11.3
LG25-016 0.0 7.6 7.6 0 25 25 NS
7.6 10.7 3.0 25 35 10 5.22
including 9.1 10.7 1.5 30 35 5 9.93
5
Hole ID From To Intercept From To Intercept Au
(m) (m) (m) (ft) (ft) (ft) (g/t)
13.7 15.2 1.5 45 50 5 0.23
15.2 42.7 27.4 50 140 90 NS
53.3 109.7 56.4 175 360 185 NS
115.8 129.5 13.7 380 425 45 1.45
including 126.5 128.0 1.5 415 420 5 3.71
134.1 157.0 22.9 440 515 75 NS
157.0 170.7 13.7 515 560 45 0.44
170.7 192.0 21.3 560 630 70 NS
198.1 201.2 3.0 650 660 10 0.24
LG25-015 0.0 6.1 6.1 0 20 20 NS
10.7 16.8 6.1 35 55 20 NS
21.3 47.2 25.9 70 155 85 NS
51.8 56.4 4.6 170 185 15 NS
64.0 70.1 6.1 210 230 20 NS
106.7 108.2 1.5 350 355 5 0.3
108.2 141.7 33.5 355 465 110 NS
150.9 166.1 15.2 495 545 50 NS
192.0 195.1 3.0 630 640 10 0.7
201.2 202.7 1.5 660 665 5 0.21
LG25-014 0.0 7.6 7.6 0 25 25 NS
10.7 21.3 10.7 35 70 35 0.225
including 13.7 15.2 1.5 45 50 5 0.48
29.0 30.5 1.5 95 100 5 0.2
56.4 71.6 15.2 185 235 50 NS
including 123.4 128.0 4.6 405 420 15 NS
134.1 143.3 9.1 440 470 30 NS
157.0 158.5 1.5 515 520 5 0.3
163.1 164.6 1.5 535 540 5 0.91
169.2 178.3 9.1 555 585 30 NS
221.0 233.2 12.2 725 765 40 NS
Notes: NS= not sampled; Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10m internal dilution.
True widths are unknown until zone dips are proven. Only visually altered samples were sent for assay; assaying was
only for gold.
Table 2: 2025 Baner Drill Program – Infill Assay Results
Hole ID From To Intercept From To Intercept Au
(m) (m) (m) (ft) (ft) (ft) (g/t)
LG25-004 3 4.6 1.6 10 15 5 0.26
6.1 9.1 3 20 30 10 NS
15.2 57.9 42.7 50 190 140 *0.71
incl. 25.9 33.5 7.6 85 110 25 *2.4
incl. 27.4 29 1.6 90 95 5 4.39
57.9 129.5 71.6 190 425 235 *NS
131.1 202.7 71.6 430 665 235 0.59
incl. 172.2 173.7 1.5 565 570 5 1.83
incl. 178.3 179.8 1.5 585 590 5 1.22
LG25-007 0 3.1 3.1 0 10 10 NS
4.6 6.1 1.5 15 20 5 0.29
9.1 10.7 1.6 30 35 5 0.2
15.2 16.8 1.6 50 55 5 0.27
22.9 24.4 1.5 75 80 5 1.25
35.1 36.6 1.5 115 120 5 0.23
41.1 44.2 3.1 135 145 10 0.29
50.3 56.4 6.1 165 185 20 *1.1
incl. 50.3 51.8 1.5 165 170 5 2.7
67.1 68.6 1.5 220 225 5 0.49
76.2 99.1 22.9 250 325 75 NS
99.1 100.6 1.5 325 330 5 0.4
103.6 109.7 6.1 340 360 20 NS
6
Hole ID From To Intercept From To Intercept Au
(m) (m) (m) (ft) (ft) (ft) (g/t)
109.7 112.8 3.1 360 370 10 1.16
114.3 129.5 15.2 375 425 50 NS
131.1 132.6 1.5 430 435 5 0.59
135.6 137.2 1.6 445 450 5 0.2
138.7 143.3 4.6 455 470 15 NS
147.8 153.9 6.1 485 505 20 0.23
157 158.5 1.5 515 520 5 0.22
160 163.1 3.1 525 535 10 0.37
175.3 181.4 6.1 575 595 20 NS
LG25-001 0 12.2 12.2 0 40 40 NS
13.7 16.8 3 45 55 10 0.18
18.3 96.0 77.7 60 315 255 NS
96.0 135.6 39.6 315 445 130 *0.56
incl. 102.1 108.2 6.1 335 355 20 *NS
incl. 109.7 115.8 6.1 360 380 20 *2.1
137.2 143.3 6.1 450 470 20 NS
153.9 155.4 1.5 505 510 5 0.2
155.4 163.1 7.6 510 535 25 NS
166.1 167.6 1.5 545 550 5 0.35
172.2 213.4 41.1 565 700 135 *0.31
incl. 182.9 187.5 4.6 600 615 15 NS
LG25-002 0 80.8 80.8 0 265 265 NS
91.4 97.5 6.1 300 320 20 0.47
106.7 120.4 13.7 350 395 45 NS
129.5 132.6 3 425 435 10 0.37
149.4 257.6 108.2 490 845 355 *0.50
incl. 152.4 158.5 6.1 500 520 20 NS
incl. 158.5 160.0 1.5 520 525 5 *1.5
incl. 164.6 166.1 1.5 540 545 5 *1.1
incl. 190.5 207.3 16.8 625 680 55 1
incl. 193.5 202.7 9.1 635 665 30 *1.3
incl. 236.2 237.7 1.5 775 780 5 1.33
Notes: NS= not sampled; Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10m internal dilution.
True widths are unknown until zone dips are proven. Only visually altered samples were sent for assay; assaying was
only for gold. *New (the rest previously released)
Table 3: Drill Hole Coordinates
Hole ID Azimuth Dip Northing Easting Total Depth
(m)
Total Depth
(ft)
LG25-006 299 -45 5069887 615257 214.9 705
LG25-010 234 -85 5069806 615344 160.0 525
LG25-014 162 -77 5069816 615182 236.2 775
LG25-015 92 -45 5069816 615182 202.7 665
LG25-016 107 -70 5069816 615182 202.7 665
LG25-001 221 -45 5069285 615400 221.0 725
LG25-002 185 -45 5069278 615404 257.0 845
LG25-004 252 -60 5069487 615384 202.7 665
LG25-007 234 -85 5069820 615378 181.35 595
Geology and Mineralization
The belt of mineralization that traces through the Elk City and Orogrande mining districts is known as
the Orogrande Shear Zone, and is estimated to be between 100-200m wide, with a general NNE trend.
Gold mineralization occurs along this zone in numerous prospects and small historic mines. Most of
the mineralization appears to be along Riedel shear structures that cross over between two bounding
major north-south structures along the Orogrande Shear Zone . In general, higher grade historical
mining was undertaken on narrow zones of strong sericite-silica-carbonate alteration and quartz veins.
Intrusion-related structurally controlled mineralization has been suggested previously. At the Property,
the predominant host rock is quartzite, with some biotite gneiss also present.
7
Review by Qualified Person
Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as
defined under National Instrument 43 -101 - Standards of Disclosure for Mineral Projects , who
reviewed and approved scientific and technical disclosure in this press release. The Qualified Person
has not reviewed the mineral tenure, nor independently verified the legal status and ownership of the
Property or any underlying property agreements.
Drilling and Sampling: Drilling was carried out using a Foremost -built tracked MPD1500 RC drilling
unit, the rig has jacks and a blade and is capable of working on small pads on steep ground to minimize
ground prep. Drilling to final hole depth was completed using 4 -inch pipe and a 5 1/4 inch bit. Holes
were cased down to approximately 7.6m (25ft) with 8-inch steel casing drifted-in using a tricone bit.
RC drilling uses a hammer and at depth below groundwater level a tricone bit was sometimes used.
RC drilling was done wet, with water actively pumped down the hole, mixing with pulverised sample,
and coming through the cyclone to an 8 -compartment rotary fan wet splitter. Each compartment can
be shut off giving control of the amount of split material. Rotary splitter was set up with 1:2 split, with
the half split going into a calico bag housed in a bucket for an assay sample. The remainder of the
sample falls to the ground and runs into the sump. Each assay sample is for a 1.52m (5ft) interval.
The splitter and cyclone are flushed every 4 samples or upon noticing a change in color. Chips were
collected from the splitter reject and put into chip trays for reference.
Bar-coded Calico bags are pre-labelled, and a corresponding sequential from-to depth is pre-recorded
in a spreadsheet. Quality control samples are included in the numerical sequence with B, S, or D
designations for blanks, standards, and duplicates. The d rilling team is responsible for changing the
bags and regular company supervision and cross -checks on sample numbers and intervals avoids
sample mix-ups. Filled sample bags are laid on the ground in order so a visual check can be easily
performed when collecting samples.
Samples are dispatched to the ALS Global prep-lab in Twin Falls, Idaho, USA with final gold assays
completed in Reno, Nevada. The lab has ISO/IEC 17025 accreditation. All samples are assayed for
gold by Fire Assay, with gravimetric finish. The Company's Q A/QC program includes the regular
insertion of blanks and standards into the sample shipments. Duplicates were prepared on -site with
a riffle splitter. Standards, blanks and duplicates are inserted at approximately one per 15 samples.
About Legacy Gold Mines Ltd.
The Company is a Canadian-based gold exploration and development company that is listed on the
TSX Venture Exchange under the symbol “LEGY”. The Company holds an option to acquire a 100%
undivided interest in and to the mineral claims comprising the Property located in Idaho County, Idaho,
USA.
Additional information about the Company and the Property is available on SEDAR+ at
www.sedarplus.ca under the Company’s profile, including a technical report titled “NI 43-101 Technical
Report on the Baner Project, Idaho County, Idaho, USA”, dated effective August 1, 2024, prepared by
Steven A. Osterberg, Ph.D., P.G. (the “Technical Report”).
For further information, please contact:
Legacy Gold Mines Ltd.
Brian Hinchcliffe, Executive Chairman and Chief Executive Officer
Telephone: +1 (587) 327-9815
Email: [email protected]
CAUTIONARY STATEMENT REGARDING FORWARD -LOOKING INFORMATION: This press
release includes certain "forward-looking statements" under applicable Canadian securities legislation.
Forward-looking statements include, but are not limited to, timing and completion of any exploration,
8
drilling and work programs on the Property, estimates of mineralization from drilling, sampling and
geophysical surveys, geological information projected from drilling and sampling results and the
potential quantities and grades of the target zones, the potential for minerals and/or mineral resources
and reserves, and statements regarding the plans, intentions, beliefs, and current expectations of the
Property and the Company that may be described herein. Forward -looking statements consist of
statements th at are not purely historical, including any statements regarding beliefs, plans,
expectations or intentions regarding the future. Such information can generally be identified by the use
of forward-looking wording such as “may”, “expect”, “estimate”, “antic ipate”, “intend”, “believe” and
“continue” or the negative thereof or similar variations. Readers are cautioned not to place undue
reliance on forward -looking statements, as there can be no assurance that the plans, intentions or
expectations upon which they are based will occur.
By their nature, forward-looking statements involve numerous assumptions, known and unknown risks
and uncertainties, both general and specific, that contribute to the possibility that the predictions,
estimates, forecasts, projections and other forward -looking statements will not occur. These
assumptions, risks and uncertainties include, among other things, the state of the economy in general
and capital markets in particular, as well as those risk factors discussed in the Filing Statement of the
Company dated effective September 19, 2024 or referred to in the Company's annual Management's
Discussion and Analysis for the year ended December 31, 2024 and the period ended September 30,
2025 available at www.sedarplus.ca, many of which are beyond the control of the Company. Forward-
looking statements contained in this press release are expressly qualified by this cautionary statement.
The forward-looking statements contained in this press release are made as of the date of this press
release. Except as required by law, the Company disclaims any intention and assumes no obligation
to update or revise any forward -looking statements, wheth er as a result of new information, future
events or otherwise. Additionally, the Company undertakes no obligation to comment on the
expectations of, or statements made by, third parties in respect of the matters discussed above.
Neither the TSX Venture Exchange nor its Regulation Service Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this release.