Kootenay Silver Intercepts 1,050 gpt Silver over 2.0 Meters within 667 gpt Silver over 7.05 Meters with Final 2021 Drill Holes On Columba High-Grade Silver Project
Kootenay Silver Intercepts 1,050 gpt Silver over 2.0 Meters within 667 gpt Silver over 7.05
Meters with Final 2021 Drill Holes On Columba High-Grade Silver Project
VANCOUVER, BC, Dec. 16, 2021 /CNW/ - Kootenay Silver Inc. (TSXV: KTN) (the "Company" or
"Kootenay") is pleased to announce drill results from the final three holes of the 2021 Phase 3
program on the Columba High-Grade Silver Project (the "Property") in Chihuahua State, Mexico. These
last 3 holes tested the B Vein, located in the southwest portion of the Property. Previous results from
the B Vein were released on January 20, 2021 (Phase 2 Drill program). The Phase 3 program drilled a
total of 5,782 meters.
The B Vein is approximately 400 meters East of the D Vein, another promising high -grade area that
recently produced the best results on the Property to date (News Release November 3, 2021). Initial
testing on the B Vein was performed during 2020 with 3 holes drilled. Previously released highlights
include Hole CDH-20-082 returning 1,186 gpt silver over 4.6 meters within 691 gpt silver over 9
meters and 112 gpt silver over 70.5 meters.
James McDonald Kootenay's President and CEO states, "The B Vein is continuing to yield
impressive grades and widths. These results are amongst the best on the Property and as such we
view the B Vein as having excellent potential for the discovery of large, mineralized zones within the
vein."
Gustavo Gallego, Kootenay's Chief Geologic Engineer commented, "The B vein system is very
promising, like all the targets drilled to date in Columba, drilling has returned excellent values with very
interesting widths. We have tested a little more than 200 meters in length of this system and up to 200
meters in depth with drilling. On the surface we did not find high values of silver, however important
grades begin approximately 100 meters deep, which gives us confidence that almost the entire
epithermal system is preserved from erosion. With the 1:500 scale mapping program we have
managed to extend this area by up to 600 meters on strike with vein widths of up to 1 meter on the
surface. We look forward to the phase 4 program to begin drilling to expand this ent ire zone."
Grades found within these final holes, Holes CDH-21-111 to CDH-21-113, coincide well with the results
reported earlier this year for the B Vein.
Drill Highlights:
CDH-21-111
• 105 gpt silver over 5.29 meters including;
• 190 gpt silver over 2.15 meters.
CDH-21-112
• 219 gpt silver over 29.5 meters including
o 434 gpt silver over 13.05 meters including;
o 1,050 gpt silver over 2 meters within 667 gpt silver over 7.05 meters.
CDH-21-113
• 156 gpt silver over 3.5 meters; and
• 628 gpt silver over 1.1 meters within 393 gpt silver over 2.05 meters.
Click to view CDH-21-111 to CDH-21-113 plan map and cross sections.
Detailed Drill Results – CDH-21-111 to Drill-21-113
Hole ID From
(meters)
To
(meters)
Interval
(meters)
Silver
(gpt) Pb (%) Zn
(%)
Geologic Intersection
CDH-21-
111 155.71 161 5.29 105 0.04 0.06 B vein stockwork &
veinlets
Including 157.85 160 2.15 190 0.07 0.10
Including 157.85 158.5 0.65 387 0.19 0.12 B vein system
CDH-21-
112 98.6 99.9 0.70 125 0.05 0.09 Quartz stockwork
133 133.65 0.65 174 0.07 0.15 B2 quartz barite vein
197.5 227 29.50 219 0.06 0.12 B vein + stockwork
Including 205 218.05 13.05 434 0.14 0.22 B vein system
Including 211 218.05 7.05 667 0.25 0.26
Including 212 214 2.00 1,050 0.43 0.23
Including 214 215 1.00 781 1.0 0.1
CDH-21-
113 149.5 153 3.50 156 0.06 0.15 B vein stockwork
Including 150.7 151.3 0.60 574 0.23 0.34
245.5 300.4 54.90 47 0.01 0.06
Including 254.5 257.5 3.00 114 0.01 0.1 B vein system
Including 293.95 296 2.05 393 0.03 0.28
Including 293.95 295.05 1.10 628 0.05 0.41
All widths shown are drilled widths. True widths are estimated to be between 55% and 70% of drilled widths based on the
interpreted dip and strike of the veins.
The Kootenay geological team is now focused on developing a drill program for the coming year to test
the promising high-grade zones, including the B Vein, more extensively.
Sampling and QA/QC at Columba
All technical information for the Columba exploration program is obtained and reported under a formal
quality assurance and quality control ("QA/QC") program. Samples are taken from core cut in half with
a diamond saw under the direction of qualified geologists and engineers. Samples are then labeled,
placed in plastic bags, sealed and with interval and sample numbers recorded. Samples are delivered
by the Company to ALS Minerals ("ALS") in Chihuahua. The Company inserts blanks, standards and
duplicates at regular intervals as follows. On average a blank is inserted every 100 samples beginning
at the start of sampling and again when leaving the mineral zone. Standards are inserted when
entering the potential mineralized zone and in the middle of them, on average one in every 25 samples
is a standard. Duplicates are taken in the mineralized zone, on average 1 to 2 duplicates for each hole.
The samples are dried, crushed and pulverized with the pulps being sent airfreight for analysis by ALS
in Vancouver, B.C. Systematic assaying of standards, blanks and duplicates is performed for precision
and accuracy. Analysis for silver, zinc, lead and copper and related trace elements was done by ICP
four acid digestion, with gold analysis by 30-gram fire assay with an AA finish. All drilling reported is HQ
core and has been contracted to Globexplore Drilling from Hermosillo, Sonora, Mexico.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
Qualified Persons
The Kootenay technical information in this news release has been prepared in accordance with the
Canadian regulatory requirements set out in National Instrument 43-101 (Standards of Disclosure for
Mineral Projects) and reviewed and approved on behalf of Kootenay by James McDonald, P.Geo,
President, CEO & Director for Kootenay, a Qualified Person.
About Kootenay Silver Inc.
Kootenay Silver Inc. is an exploration company actively engaged in the discovery and development of
mineral projects in the Sierra Madre Region of Mexico and in British Columbia, Canada. Supported by
one of the largest junior portfolios of silver assets in Mexico, Kootenay continues to provide its
shareholders with significant leverage to silver prices. The Company remains focused on the expansion
of its current silver resources, new discoveries and the near-term economic development of its priority
silver projects located in prolific mining districts in Sonora, State and Chihuahua, State, Mexico,
respectively.
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS:
The information in this news release has been prepared as at December 15, 2021. Certain statements
in this news release, referred to herein as "forward-looking statements", constitute "forward-looking
statements" under the provisions of Canadian provincial securities laws. These statements can be
identified by the use of words such as "expected", "may", "will" or similar terms.
Forward-looking statements are necessarily based upon a number of factors and assumptions that,
while considered reasonable by Kootenay as of the date of such statements, are inherently subject to
significant business, economic and competitive uncertainties and contingencies. Many factors, known
and unknown, could cause actual results to be materially different from those expressed or implied by
such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-
looking statements, which speak only as of the date made. Except as otherwise required by law,
Kootenay expressly disclaims any obligation or undertaking to release publicly any updates or revisions
to any such statements to reflect any change in Kootenay's expectations or any change in events,
conditions or circumstances on which any such statement is based.
Cautionary Note to US Investors: This news release includes Mineral Reserves and Mineral
Resources classification terms that comply with reporting standards in Canada and the Mineral
Reserves and the Mineral Resources estimates are made in accordance with National Instrument 43 -
101 – Standards of Disclosure for Mineral Projects ("NI 43-101"). NI 43-101 is a rule developed by the
Canadian Securities Administrators that establishes standards for all public disclosure an issuer makes
of scientific and technical information concerning mineral projects. These standards differ significantly
from the requirements adopted by the U.S. Securities and Exchange Commission (the " SEC"). The
SEC sets rules that are applicable to domestic United States reporting companies. Consequently,
Mineral Reserves and Mineral Resources information included in this news release is not comparable
to similar information that would generally be disclosed by domestic U.S. reporting companies subject
to the reporting and disclosure requirements of the SEC. Accordingly, information concerning mineral
deposits set forth herein may not be comparable with information made public by companies that report
in accordance with U.S. standards .
James McDonald, CEO and President at 403-880-6016; Ken Berry, Chairman at 604-601-5652; 1-888-
601-5650 or visit: www.kootenaysilver.com