Koryx Copper Intersects 124.44 Metres at 0.36% Cu Eq, Including 26 Meters at 0.45% Cu Eq and 2 Metres at 1.17% Cu Eq Significant copper and molybdenum intersections include:
Koryx Copper Intersects 124.44 Metres at 0.36% Cu Eq, Including 26 Meters at
0.45% Cu Eq and 2 Metres at 1.17% Cu Eq
Significant copper and molybdenum intersections include:
• HM21 : 0.36% CuEq over 124.44 metres including 0.45% CuEq over 26 metres; and 1.17% CuEq over 2 metres;
and 1.04% CuEq over 2 metres; and 0.43% CuEq over 16 metres.
• HM16: 0.32% CuEq over 18 metres from near surface including 6m @ 0.45% CuEq.
VANCOUVER, British Columbia, Feb. 15, 2024 -- Koryx Copper Inc. ("Koryx" or “the Company") (TSX-V: KRY) announces the
second assay results from its current drilling program at its Haib Copper project in southern Namibia. The Company’s latest
two drill holes continue to confirm that the deposit can deliver high grades over substantial widths within the known historical
resource.
Pierre Léveillé, President & CEO of Deep-South stated that: "We are extremely enthusiastic by the results from the drill
program. We continue to demonstrate that the drilling results of the previous companies have seriously
underestimated the average grade of the deposit. Our drilling is a game changer and will strongly add value to the
deposit.”
The 2 holes for which assay results are reported here, cover 472.92 metres with both holes drilled in the Pit 1 target area.
These holes were positioned to close the sample spacing of the previously identified higher grade mineralisation in the Pit 1
area, and to better define and understand the geometry of mineralisation controls here. Assay results of significant
intersections are tabulated below:
Significant Intersections
Hole# Zone From (m) To (m) Width (m)1 CuEq (%)2 Cu (%) Mo (%)
HM16 Main 6.00 24.00 18.00 0.32 0.32 0.003
Including 12.00 18.00 6.00 0.45 0.45 0.002
HM21
Main 90.00 94.00 4.00 0.41 0.40 0.002
Main 140.00 144.00 4.00 0.50 0.40 0.029
Main 196.00 320.44 124.44 0.36 0.34 0.005
Including 230.00 256.00 26.00 0.45 0.44 0.004
Including 242.00 244.00 2.00 1.17 1.17 0.001
Including 254.00 256.00 2.00 1.04 1.00 0.013
Including 280.00 284.00 4.00 0.60 0.58 0.007
Including 294.00 310.00 16.00 0.43 0.41 0.007
1. Width refers to intersection width; true widths have not been determined.
2. CuEq (copper equivalent) has been used to express the combined value of copper and molybdenum and is provided for
illustrative purposes only. No allowances have been made of recovery losses that may occur should mining eventually
result. Calculations use metal prices of US$3.00/lb copper, US$10/lb molybdenum using the formula: CuEq% = Cu% +
(Mo% [$10/$3])
Figure 1 : Planview showing the positions of the boreholes being reported here.
Borehole Locations (Figure 1)
HM16 was positioned in the dry riverbed and drilled southwards along the eastern edge of the Pit1 target area to delineate the
eastward extension of the near-surface shallow dipping mineralization intersected in the hill to the south.
HM21 was positioned as part of a fan with HM22 and HM23 due to limited access resulting from the extreme topography in
this area. It was planned to test the southward extension of the shallow mineralization identified to the immediate north and to
test for and close the sample spacing of the deeper mineralization seen in HM22, HM23 and some historical boreholes.
Discussion of Pertinent Results
HM16
Assay results show that the near surface shallow dipping mineralization here continues eastwards for at least 90m. Although
slightly lower grade, the mineralization thickness is maintained.
HM21
Results confirm that shallow mineralization does occur below the so-called “Directors Perch” in line with results for HM22 and
HM23. Whether this is a southward extension of the wide shallow dipping mineralization in the centre of Pit 1 is uncertain at
the moment. As more close spaced drilling is completed and mineralization controls are better resolved, this will become more
evident. Significantly the very wide (>100m), deeper mineralization intersected in HM22 and HM23 is shown to continue more
than 200m eastwards to historical boreholes which also show mineralized intersections >100m. The preservation of these
thicknesses over significant lateral distances (>450m) are very encouraging.
Drilling Program Update
Since the resumption of drilling in October 2023, 14 holes have been completed totaling 2,511 metres. Twelve holes (2,322m)
have been sampled and submitted to ALS for assaying with the results of 5 holes (502 samples) received to date from ALS. A
further 9 boreholes (1,600m) remain to be drilled from the current program, all of which are in the Pit 1 target area.
At 1.8 billion years (Archean), the Haib Copper Deposit is one of the oldest deposits in the world. Over time, it has seen
several transformations including shearing and faulting events that appear to have further concentrated Cu and Mo. A number
of these mineralized structures have been identified in the Pit1. The revised drilling program looks to close the sample spacing
in the Pit1 area and better delineate the extent and grades of these.
Quality Control
All drill cores were logged, photographed, and cut in half with a diamond saw. Half of the cores were bagged and sent to ALS
Laboratories Ltd. in Johannesburg, South Africa for analysis (SANAS Accredited Testing Laboratory, No. T0387), while the
other half was quartered with one quarter archived and stored on site for verification and reference purposes while the other
quarter will be used for metallurgical test work. 33 elements are analyzed by Induced Coupled Plasma (ICP) utilizing a 4-acid
digestion and gold is assayed using a 30g fire assay method. Duplicate samples, blanks, and certified standards are included
with every batch and are actively used to ensure proper quality assurance and quality control.
Please note that: Mineral Resources that are not mineral reserves do not have demonstrated economic viability. Mineral
resource estimates do not account for mineability, selectivity, mining loss and dilution. These mineral resource estimates are
based on Indicated Mineral Resources that are considered too speculative geologically to have the economic considerations
applied to them that would enable them to be categorized as mineral reserves. However, there is no certainty that these
indicated mineral resources will be converted to measured categories through further drilling, or into mineral reserves, once
economic considerations are applied. There is no certainty that the preliminary economic assessment will be realized.
Qualified Person
Mr. Dean Richards Pr.Sci.Nat. , MGSSA – BSc. (Hons.) Geology, is the Qualified Person for the Haib Project as defined by
National Instrument 43-101 and has approved the technical disclosure contained in this news release.
About the Haib Copper Project
The Haib Copper Deposit is a large copper/molybdenum deposit situated 40 kilometers from the southern boundary of
Namibia. The license covers 370 square kilometers (37,000 hectares). Over the years the project has seen 70,000 meters of
drilling, several metallurgical test work programmes, geophysical surveys, geological mapping, mine modeling and even a
feasibility study in 1996. Koryx Copper holds all the historical data.
About Koryx Copper Inc.
Koryx Copper is a mineral exploration and development company. Koryx growth strategy is to focus on the exploration and
development of quality assets in significant mineralized trends and in proximity to infrastructure in stable countries. The
Company holds the Haib Copper Project in Namibia and holds an interest in three exploration licenses in the Copperbelt in
Zambia. In using and assessing environmentally friendly technologies in the development of its copper projects, Koryx Copper
embraces the green revolution.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This press release contains certain "forward-looking statements," as identified in Koryx’s periodic filings with Canadian
Securities Regulators that involve a number of risks and uncertainties.
There can be no assurance that such statements prove to be accurate and actual results and future events could differ
materially from those anticipated in such statements.
This News Release contains forward-looking statements, which relate to future events. In some cases, you can identify
forward-looking statements by terminology such as "will", "may", "should", "expects", "plans", or "anticipates" or the negative
of these terms or other comparable terminology. All statements included herein, other than statements of historical fact, are
forward looking statements, including but not limited to the Company’s plans regarding the Haib Copper project. These
statements are only predictions and involve known and unknown risks, uncertainties and other factors that may cause the
Company’s actual results, level of activity, performance or achievements to be materially different from any future results,
levels of activity, performance, or achievements expressed or implied by these forward-looking-statements. Such uncertainties
and risks may include, among others, actual results of the Company's exploration activities being different than those
expected by management, delays in obtaining or failure to obtain required government or other regulatory approvals or
financing, inability to procure equipment and supplies in sufficient quantities and on a timely basis, equipment breakdown and
bad weather. While these forward-looking statements, and any assumptions upon which they are based, are made in good
faith and reflect the Company's current judgment regarding the direction of its business, actual results will almost always vary,
sometimes materially, from any estimates, predictions, projections, assumptions or other future performance suggestions
herein. Except as required by applicable law, the Company does not intend to update any forward-looking statements to
conform these statements to actual results.
More information is available by contacting Pierre Léveillé, President & CEO at
+1-819-340-0140 or at: [email protected]
A photo accompanying this announcement is available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/dc6353f2-fe65-4237-99d2-471d51eae55d