Kobo Resources Intersects 10.0 m at 2.50 g/t Au and 13.0 m at 1.49 g/t Au, Confirming Strong Gold Mineralisation Along the Contact Zone Fault at Kossou
Page 1 of 11
PRESS RELEASE OCTOBER 30, 2025
Kobo Resources Intersects 10.0 m at 2.50 g/t Au and 13.0 m at 1.49 g/t
Au, Confirming Strong Gold Mineralisation Along the Contact Zone
Fault at Kossou
• Strong mineralisation along the Contact Zone Fault (“CZ Fault”) confirmed with multiple
broad gold intercepts, including 10.0 m at 2.50 g/t Au and 11.0 m at 0.51 g/t Au at the Road
Cut Zone
• High-grade near-surface intersections such as 1.0 m at 17.30 g/t Au at the Jagger Zone
underscore the strength of gold-bearing shears and continuity within the Jagger structural
corridor
• Excellent down-dip and along-strike continuity demonstrated across a 300-m section of
the CZ Fault, reinforcing the Company’s structural model and confirming the growth
potential of the Kossou Gold Project
QUEBEC CITY, QC – Kobo Resources Inc. ("Kobo” or the "Company") (TSX.V: KRI) is pleased to report
additional diamond drill results from its ongoing program at the 100% -owned Kossou Gold Project
(“Kossou”) in Côte d’Ivoire, West Africa.
Diamond Drill Results – Highlights:
Road Cut Zone:
• KDD0104
o 7.0 metres (“m”) at 1.20 g/t Au from 72.0 m
o 13.0 m at 1.49 g/t Au from 93.0 m
• KDD0109
o 10.0 m at 2.50 g/t Au from 41.0 m, incl. 6.0 m at 3.77 g/t Au from 45.0 m
o 10.0 m at 1.86 g/t Au from 204.0 m
o 11.0 m at 0.51 g/t Au from 229.0 m
Jagger Zone
• KDD0100
o 1.0 m at 17.30 g/t Au from 38.0 m
o 1.0 m at 3.72 g/t Au from 94.0 m
o 9.0 m at 1.04 g/t Au from 172.0 m
o 11.0 m at 1.26 g/t Au from 188.0 m
Edward Gosselin, CEO and Director of Kobo commented: “The latest results continue to confirm strong,
continuous gold mineralisation along the Contact Zone Fault. These results also further define parallel gold-
bearing shears within both the Road Cut Zone and Jagger Zone structural corridors, reinforcing our
confidence in the scale and continuity of the system.” He continued: “The new drilling has outlined broad
mineralised zones with strong down-dip continuity and encouraging grades near surface and at depth, all
Page 2 of 11
consistent with our geological model for Kossou. Together, these results continue to strengthen our view
that Kossou hosts a robust and growing gold system with significant potential for resource expansion as
drilling progresses.”
Road Cut Zone Highlights
Drilling at the Road Cut Zone targeted a 300-m strike length between sections RCZ400 and RCZ700,
with results confirming mineralisation along and adjacent to the CZ Fault. Boreholes KDD0104 and
KDD0109 on section RCZ600 returned some of the strongest results to date:
• KDD0109 intersected 10.0 m at 2.50 g/t Au from 41.0 m, including 6.0 m at 3.77 g/t Au from
45.0 m, as well as 10.0 m at 1.86 g/t Au from 204.0 m and 11.0 m at 0.51 g/t Au from 229.0 m.
• KDD0104 returned 13.0 m at 1.49 g/t Au from 93 m and 7.0 m at 1.20 g/t Au from 72 m, located
approximately 20 m west of the CZ Fault.
The mineralised intersections in boreholes KDD0104 and KDD0109 along the CZ Fault are comparable
in both grade and thicknesses reported previously in borehole KDD0098. This hole shows a good degree
of consistency and continuity down dip of the prominent shear zone.
The upper mineralised intersection of 10.0 m at 2.50 g/t Au in KDD0109 also confirms an excellent
down-dip continuity of gold mineralisation first identified in hole KDD0014 (9.0 m at 4.27 g/t Au),
establishing a robust, gold-bearing structure up to 175.0 m from the main fault.
Additional intercepts along the CZ Fault include 10.0 m at 0.55 g/t Au and 5.0 m at 1.75 g/t Au in
KDD0102, while KDD0105 returned a 1 m interval at 5.05 g/t Au associated with quartz veining south of
RCZ600. Collectively, the Road Cut Zone results confirm consistent gold mineralisation along a 150-200
m section of the CZ Fault, highlighting its potential as a major first-order control on mineralisation.
Figure 1: Road Cut Zone Drill Hole Location Map and Simplified Geology
Page 3 of 11
Figure 2: Mineralised Intercept in KDD0104 – 13.0 m at 1.49 g/t Au (93.0 m to 106.0 m)
Page 4 of 11
Figure 3: Cross Section RCZ700
Page 5 of 11
Jagger Zone Highlights
Drilling at the Jagger Zone was completed across two 50-m sections (JZ750 and JZ800), designed to test
continuity within the central shear and southern extensions of the zone.
• KDD0100 intersected 1.0 m at 17.30 g/t Au from 38.0 m, 9.0 m at 1.04 g/t Au from 172.0 m, and
11.0 m at 1.26 g/t Au from 188.0 m, demonstrating higher grades and continuity within the core
of the Jagger shear zone compared to earlier holes (e.g., KDD0031 – 4.0 m at 3.26 g/t Au).
• KDD0106 returned 3.3 m at 0.96 g/t Au from 62.7 m near surface, confirming the presence of
mineralised shears along the southern continuation of Structure 6.
Although shallow holes KDD0106 and KDD0108 intersected lower-grade mineralisation, results at depth
confirm that well-defined shears persist below 200 m, warranting follow-up drilling to extend these high-
grade zones down dip.
Figure 4: Jagger Zone Drill Hole Location Map and Simplified Geology
Page 6 of 11
Figure 5: Mineralised Intercept from KDD0100 – 11.0 m at 1.26 g/t Au (188.0 to 199.0 m)
Page 7 of 11
Figure 6: Jagger Zone Cross Section JZ750
Page 8 of 11
Table 1: Summary of Significant Diamond Drill Hole Results