KORE MINING DRILLS 76.5 METERS OF 1.1 G/T GOLD AT SURFACE IN FIRST HOLE AT FG GOLD PROJECT AND FINDS QUARTZ VEINING BELOW EXISTING RESOURCE Assays pending on 7 additional drill holes, all which intercepted quartz veining, including 8
1
TSXV - KORE OTCQB - KOREF
KORE MINING DRILLS 76.5 METERS OF 1.1 G/T GOLD AT SURFACE IN FIRST HOLE AT FG GOLD
PROJECT AND FINDS QUARTZ VEINING BELOW EXISTING RESOURCE
Assays pending on 7 additional drill holes, all which intercepted quartz veining, including 8
incidents of visible gold in quartz veins
Vancouver, BC May 19 , 2020 - KORE Mining Ltd. (TSXV: KORE | OTCQB: KOREF) (“KORE” or the
“Company”) is pleased to provide an update and early results from the FG Gold Project (“Project” or “FG
Gold”) in the Cariboo Region of British Columbia. Eight large diameter (HQ) core drill holes for a total of
1,577 meters have been completed and the Company intends to continue drilling once spring break-up is
complete in mid-June. Assays from the top of the first hole are included in this news release.
The Company will be conducting an exploration conference call on Wednesday, May 20, 2020 at 1:00 pm
Eastern Time (10:00 am Paci fic Time) to discuss these results and speak towards its other exploration
projects in North America. Details of the call can be found below.
Highlights
• FG-20-368 intercepts 76.5 meters of 1.1 g/t gold starting at 5.5 meters including;
o 12.5 meters of 1.2 g/t gold at 5.5 meters down hole;
o 8.0 meters of 1.6 g/t gold at 27 meters down hole;
o 26.0 meters 2.0 g/t gold at 56 meters down hole (including 1.0 meter of 28.4 g/t); and
o Assays pending from bottom 40 meters which intercepted 3 additional zones of quartz
veining below existing resource
• FG-20-369 intercepted 13 quartz veins between 5.5 and 250 meters down -hole which tested an
additional 100 meters below the previous resource (see cross-section in Figure 3)
The remaining holes FG- 20-370 to FG -20-375 (assays pending) all intercepted zones of quartz veining,
within the existing resource and newly identified quartz veins below the existing resource, which included
eight total incidences of visible gold being identified in core logging. The Company will release assays from
the lower section of FG-20-368 and the remaining holes as they become available.
The full table of results are included below. Detailed core logs and photos are available at:
www.koremining.com/exploration-highlights.
KORE CEO Scott Trebilcock stated, “This is an exciting start to our exploration program at FG Gold.” Mr.
Trebilcock continued, “The objective is to better define structural controls and extend the shallow known
mineralization at depth. We believe with continued drilling, there is potential to increase the grade while
adding to the existing FG Gold resource.”
The 20-kilometer trend is defined by gold in soils and geophysics that traces the mineralized rock group
around the regional syncline. The Project has only been shallowly drilled where the mineralized rock
group comes to surface. Past drilling averages only 93 meters deep into a low to moderately plunging
sedimentary host rock. Mineralization is open at depth and along almost the entire trend. Figure 2 is a
regional cross -section that shows the host rock potential at depth and connection to a potential
porphyritic intrusion.
2
Due to coarse visible gold, metallic screening assays provide a much more representative sample versus
conventional fire assays. Historical drilling and assays had limited and sporadic metallic screen analyses
which may have underestimated historical gold grades.
REMINDER: Exploration Conference Call and Webcast
KORE is hosting an exploration focused webinar for investors on Wednesday, May 20, 2020 at 1:00 pm
Eastern Time (10:00 am Pacific Time). Click here to register for the webcast or following details:
Dial in: 1-877-208-1395 (toll free North America) or +1 778-560-2724 (International)
Webcast: onlinexperiences.com/Launch/QReg/ShowUUID=34EB3778-F3BD-4E81-A4DA-09A7F8B8DBAD
Details of Core Holes FG-20-368/369
Hole FG-20-368 was targeting the structural controls for known mineralization, and looking to extend the
mineralization down the host rock structure. H ole FG-20-368 encountered seven quartz vein intervals
with assays compiled in Table 1 below. Assays are pending from bottom 40 meters of which intercepted
3 additional quartz veins below the existing resource.
Hole FG-20-369 was drilled as a scissor hole from the same pad and also encountered quartz veining and
two incidences of coarse visible gold (see Figure 4). A cross section of the two holes is presented as Figure
3. FG-20-369 intercepted 13 quartz veins between 5.5 and 250 meters down -hole which tested an
additional 100 meters below the previous resource. A total of ten quartz vein intercepts in FG-20-368 and
FG-20-369 (assays pending) were encountered below the depth of historic drilling.
As more assay data comes in KORE will be conducting structural analysis and interpretation.
Table 1: Results from Core Hole FG-20-368
From
(meters)
To
(meters)
Width*
(meters) Gold (g/t)
Intercept 5.5 82.0 76.5 1.1
including 5.5 18.0 12.5 1.2
including 27.0 35.0 8.0 1.6
including 56.0 82.0 26.0 2.0
and including 81.0 82.0 1.0 28.4
and 106.0 110.0 4.0 0.6
Quartz zone widths*:
23.3m starting at 6.0 meters
2.7m starting at 54.8 meters
8.4m starting at 73.2 meters
9.1m starting at 106.0 meters
6.7m starting at 141.0 meters (metallic screen assays pending)
0.3m starting at 161.6 meters (metallic screen assays pending)
4.1m starting at 171.9 meters (metallic screen assays pending)
* True widths are unknown at this time and will be updated when full review and interpretation of
oriented core measurements has been completed
3
Drill Hole Locations
Location, azimuth, dip and lengths for drill holes in this news release are listed in the following table:
HoleID East North Elevation Length Azimuth Dip
FG-20-368 665196 5797758 1525 196 229 -70
FG-20-369 665196 5797758 1525 250 231 -55
FG-20-370 665212 5797734 1525 187 218 -75
FG-20-371 665189 5797779 1525 181 228 -68
FG-20-372 665290 5797637 1526 178 223 -75
FG-20-373 665290 5797637 1526 235 227 -53
FG-20-374 665306 5797611 1526 181 225 -60
FG-20-375 665276 5797653 1526 175 225 -60
Regional Geology
The FG Gold property straddles the boundary between the Omineca and Intermontane tectonics belts of
the Canadian Cordillera. The eastward emplacement of the Intermontane Belt onto the Omineca Belt
along the Eureka Thrust Fault caused widespread regional metamorphism and structural deformation of
both Belts. The regional scale, northwest trending, shallowly plunging, Eureka Syncline is the dominant
resulting structure in the project area. Rocks in the core of the Eureka Syncline are comprised of basalt,
augite porphyry flows, tuffs and volcanic breccias metamorphosed to a low grade ; they are structurally
emplaced onto metavolcanic and sedimentary rocks of the Quesnel Terrane. The Quesnel Terrane is
recognized for its prevalence of copper, gold and molybdenum mines and sh owings such as those at
Highland Valley, Boss Mountain, QR and Mount Polley.
Property Geology
The FG Gold property is centrally located over the Eureka Syncline, strategically encompassing two limbs
and the hinge zone of a gold -bearing meta- sedimentary r ock unit of the Quesnel Terrane. The gold -
bearing rock, a ‘knotted’ phyllite, is the host rock for gold mineralization over the 3 km strike length of the
Resource Area ( see Figure 1). Surface mapping and geophysical inversion of airborne electromagnetic
(EM) data suggests the knotted phyllite has a strike length of over 20 km with potentially thickened regions
occurring in the Eureka Syncline hinge zone (Kusk Zone Target) (see Figure 1).
Gold mineralization occurs in and is associated with development of quartz – Fe carbonate – muscovite –
pyrite vein stockwork. The stockwork is best developed in the knotted phyllite unit. Stockwork zones
locally concentrate in zones greater than 10 meters wide and are dominantly stratabound. Fe-carbonate
alteration and carbonate porphyroblasts development within the knotted phyllite unit is observed to
extend well outside immediate areas of veining.
About the FG Gold Project
The FG Gold project consists of 35 claims, totaling 13,008 ha, in the eastern Cariboo region of central
British Columbia, approximately 100 km east of Williams Lake. The project is at low elevation and
accessible by forestry roads. FG Gold hosts an orogenic gold deposit on the northeast limb of the Eureka
4
syncline. The southwest limb and hinge zone are underexplored. The Project also hosts copper -gold
porphyry mineralization at the Nova Zone , discovered by KORE in 2018. Figure 1 highlights the 20km
trend of host rock expression at surface.
The 20-kilometer trend is defined by gold in soils and geophysics that traces the mineralized rock group
around the regional syncline. The Project has only been shallowly drilled where the mineralized rock
group comes to surface. Past drilling averages only 93 meters deep into a steeply plunging sedimentary
host rock. Mineralization is open at depth and along almost the entire trend. Figure 2 is a regional cross-
section that shows the host rock potential at depth and potential connection to the Project’s porphyritic
intrusion.
The previous drilling targeted stratigraphic controls on mineralization and did not penetrate into the bulk
of the host-rock structure. Drilling was largely done with RC and narrow core to gen erate shallow bulk-
disseminated gold intercept models. Within the current resource there appear to be mineralized corridors
or chutes that are open at depth in the host rock.
The current resource at the FG Gold project is as follows:
Classification Size (tonnes) Grade (g/t) Au (oz) Au Cutoff (g/t)
Measured 5,600,000 0.812 145,000 0.50
Indicated 9,570,000 0.755 231,000 0.50
Inferred 27,493,000 0.718 634,900 0.50
More information on the FG Gold Project and resource is available in the “ NI 43-101 Technical Report,
Frasergold Exploration Project, Cariboo Mining Division, BC” dated July 20, 2015 by K.V. Campbell of ERSi
Earth Resource Surveys Inc. and G.H. Giroux of Giroux Consultants Ltd. technical report (“2015 Technical
Report”) filed on www.sedar.com and on KORE’s website at www.koremining.com.
About KORE
KORE is 100% owner of a portfolio of advanced gold exploration and development assets in California and
British Columbia. KORE is supported by strategic investors Eric Sprott and Macquarie Bank who, together
with the management and Board own approximately 65% of the basic shares outstanding.
Further information on KORE and its assets can be found on the Company’s updated website at
www.koremining.com and at www.sedar.com, or by contacting us as [email protected] or by
telephone at (888) 407-5450.
On behalf of KORE Mining Ltd
”Scott Trebilcock”
Chief Executive Officer
(888) 407-5450
QA/QC and Qualified Person
Once the drill core was received from the drill site, individual samples were determined, logged for geological attributes, sawn
in half, labelled, and bagged for assay submittal. The remaining drill core was then stored at a secure site in Horsefly, BC. The
Company inserted quality control samples at regular intervals within the sample stream which included blanks, preparation
duplicates, and standard reference materials with all sample shipments intended to monitor laboratory performance. Sample
shipment was conducted under a chain of custody procedure.
5
Drill core samples were submitted to Bureau Veritas’ analytical facility in Vancouver, British Columbia for preparation and
analysis. Sample preparation included drying and weighing the samples, crushing the entire sample, and pulverizing 250 grams.
Analysis for gold was by method FA450: 50g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.005
ppm and upper limit of 10 ppm. Gold assays greater than 10ppm are automatically analysed by method FA550: 50g fire assay
fusion with a gravimetric fusion. Metallic screen techniques were employed to assay gold mineralized zones thought to contain
coarse gold. Approximately 1000 grams of coarse reject material are pulverized and screened. Two splits of the fine fraction are
assayed, as well as all material that does not pass through the screen (the coarse fraction). The final gold assay reported is a
weighted average of the coarse and fine fractions.
Bureau Veritas is accredited to the ISO/IEC 17025 standard for gold assays, and all analytical methods include quality control
materials at set frequencies with established data acceptance criteria. Parameters for Bureau Veritas' internal and Kore's
external blind quality control samples were acceptable for the analyses returned.
Technical information with respect to the Project contained in this news release has been reviewed and approved by Marc Leduc,
P.Eng, who is KORE's COO and is the qualified person under National Instrument 43-101 responsible for the technical matters of
this news release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Statement Regarding Forward-Looking Information
This news release contains forward- looking statements relating to the future operations of the Company and other statements
that are not historical facts. Forward-looking statements are often identified by terms such as "will", "may", "should", "anticipate",
"expects" and similar expressions. All statements other than statements of historical fact, included in this release, including,
without limitation, statements regarding the future plans and objectives of the Company are forward- looking statements. Such
forward-looking statements, and any assumptions upon which they are based, are made in good faith and reflect our current
judgment regarding the direction of our business. Management believes that these assumptions are reasonable. Forward looking
information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance
or achievements of the Company to be materially different from any future results, performance or achievements expressed or
implied by the forward-looking information.
Such factors include, among others: risks related to exploration and development activities at the Company’s projects, and factors
relating to whether or not mineralization extraction will be commercially viable; risks related to mining operations and the hazards
and risks normally encountered in the exploration, development and production of minerals, such as unusual and unexpected
geological formations, rock falls, seismic activity, flooding and other conditions involved in the extraction and removal of
materials; uncertainties regarding regulatory matters, including obtaining permits and complying with laws and regulations
governing exploration, development, production, taxes, labour standards, occupational health, waste disposal, toxic substances,
land use, environmental protection, site safety and other matters, and the potential for existing laws and regulations to be
amended or more stringently implemented by the relevant authorities; uncertainties regarding estimating mineral resources,
which estimates may require revision (either up or down) based on actual production experience; risks relating to fluctuating
metals prices and the ability to operate the Company’s projects at a profit in the event of declining metals prices and the need to
reassess feasibility of a particular project that estimated resources will be recovered or that they will be recovered at the rates
estimated; risks related to title to the Company’s properties, including the risk that the Company’s title may be challenged or
impugned by third parties; the ability of the Company to access necessary resources, including mining equipment and crews, on a
timely basis and at reasonable cost; competition within the mining industry for the discovery and acquisition of properties from
other mining companies, many of which have greater financial, technical and other resources than the Company, for, among other
things, the acquisition of mineral claims, leases and other mineral interests as well as for the recruitment and retention of qualified
employees and other personnel; access to suitable infrastructure, such as roads, energy and water supplies in the vicinity of the
Company’s properties; and risks related to the stage of the Company’s development, including risks relating to limited financial
resources, limited availability of additional financing and potential dilution to existing shareholders; reliance on its mana gement
and key personnel; inability to obtain adequate or any insurance; exposure to litigati on or similar claims; currently unprofitable
operations; risks regarding the ability of the Company and its management to manage growth; and potential conflicts of interest.
In addition to the above summary, additional risks and uncertainties are describ ed in the “Risks” section of the Company’s
management discussion and analysis for the year ended December 31, 2019 prepared as of April 27, 2020 available under the
Company’s issuer profile on www.sedar.com.
Forward-looking statements contained herein are made as of the date of this news release and the Company disclaims any
obligation to update any forward-looking statements, whether as a result of new information, future events or results, except as
may be required by applicable securities laws. There can be no assurance that forward- looking information will prove to be
6
accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly,
readers should not place undue reliance on forward-looking information.
There is no certainty that all or any part of the mineral resource will be converted into mineral reserve. It is uncertain if further
exploration will allow improving the classification of the Indicated or Inferred mineral resource. Mineral resources are not mineral
reserves and do not have demonstrated economic viability.
Cautionary Note Regarding Mineral Resource Estimates: Information regarding mineral resource estimates has been
prepared in accordance with the requirements of Canadian se curities laws, which differ from the requirements of United States
Securities and Exchange Commission ( “SEC”) Industry Guide 7. In October 2018, the SEC approved final rules requiring
comprehensive and detailed disclosure requirements for issuers with mate rial mining operations. The provisions in Industry
Guide 7 and Item 102 of Regulation S -K, have been replaced with a new subpart 1300 of Regulation S -K under the United States
Securities Act and will become mandatory for SEC registrants after January 1, 20 21. The changes adopted are intended to align
the SEC ’s disclosure requirements more closely with global standards as embodied by the Committee for Mineral Reserves
International Reporting Standards (CRIRSCO), including Canada ’s NI 43-101 and CIM Definitio n Standards. Under the new SEC
rules, SEC registrants will be permitted to disclose “mineral resources ” even though they reflect a lower level of certainty than
mineral reserves. Additionally, under the New Rules, mineral resources must be classified as “measured”, “indicated”, or “
inferred ”, terms which are defined in and required to be disclosed by NI 43 -101 for Canadian issuers and are not recognized
under SEC Industry Guide 7. An “Inferred Mineral Resource ” has a lower level of confidence than that ap plying to an “Indicated
Mineral Resource ” and must not be converted to a Mineral Reserve. It is reasonably expected that the majority of “Inferred
Mineral Resources ” could be upgraded to “Indicated Mineral Resources ” with continued exploration. Accordingly , the mineral
resource estimates and related information may not be comparable to similar information made public by United States
companies subject to the reporting and disclosure requirements under the United States federal laws and the rules and
regulations thereunder, including SEC Industry Guide 7 .
7
Figure 1 – Property Map with Exploration Zones and Projected Trend
8
TSXV - KORE OTCQB - KOREF
Figure 2 – Conceptual Regional Cross Section R - R’