Kingfisher Reports Shallow Drilling Intersects 73.40 g/t Gold over 1 m at Cloud Drifter Discovery
Kingfisher Reports Shallow Drilling Intersects 73.40 g/t Gold over 1 m at
Cloud Drifter Discovery
VANCOUVER, British Columbia, February 1, 2021 – Kingfisher Metals Corp. (TSX-V: KFR) (FSE: 970)
(OTCQB: KGFMF) (“Kingfisher” or the “Company”) announces assay results from three additional holes
from its initial 14-hole (4925.3 m) drill program on the Goldrange Project. Assay results for seven remaining
drill holes are pending. Goldrange is located approximately 25 km south of the town of Tatla Lake in the
Chilcotin region of Southwest British Columbia.
Highlights
• Discovery of a high-grade vein and breccia intercept with 2 m of 37.82 g/t Au, 20.0 g/t Ag, and 0.16%
Cu including 1 m of 73.40 g/t Au, 39.50 g/t Ag, and 0.29% in hole GR21-014 located 68 m below surface
(Table 1).
• Shallow drilling has revealed broad zones of near-surface mineralization over significant widths, such
as 0.76 g/t Au over 8 m in hole GR21-012 and 0.36 g/t Au over 17 m in hole GR21-013.
• Initial drilling at the Cloud Drifter Trend has now confirmed multiple intercepts of open -ended gold
mineralization throughout the 550 m of vertical extent that was partially tested in 2021. Approximately
90% of the ~3 km Cloud Drifter Trend remains untested by drilling.
• Drill core from the previously released intercept of 6.88 g/t Au over 9 m (GR21-007) as well as two other
visually significant intercepts from GR21-009 and GR21-010 (pending assays) will be on display at the
AMEBC Roundup conference in Vancouver, BC on Feb 2-3. Drill core photos of these intercepts are
included within this release.
Dustin Perry, CEO of Kingfisher states “The headline intercept in GR21-014 demonstrates the potential for
very high-grade gold mineralization within the Cloud Drifter Trend. The high-grade gold intercepts in GR21-
014 and GR21-007 (see November 16, 2021 press release) are located at low relative elevations and are
close to surface, 68 m and 140 m respectively. These shallow targets are part of an emerging trend of high-
grade gold mineralization hosted in lower quartz diorite intrusions. Prospecting in 2020 identified several
areas of disseminated and stockwork minerali zed quartz diorite that grade up to 9 g/t Au. Seeing these
styles of mineralization on trend and up to 500 m away f rom these high -grade drill intercepts has our
exploration team excited as we move towards the 2022 drill program.
The 2021 drill program targeted a small part (350 m) of the western end of the gold -in-soil geochemical
anomaly that defines the ~3 by 2 km C loud Drifter Trend (Figure 1) . It lies in an area of extensive forest
cover and limited outcrop. Significant intercepts from the three drill holes included in this release are
highlighted in Table 1 and Figures 2-4, with more detailed drill hole summaries presented below.
*True widths are not known at this time. All widths reported are drilled widths. Values less than 10 g/t Ag and < 0.1% Cu not reported within the highlight table.
Table 1: Highlight drill intercepts from diamond drilling at the Goldrange project
Figure 1: Cloud Drifter Trend
Hole From (m) To (m) Interval (m) Au g/t Ag g/t Cu %
GR21-012 15 16 1 1.76 - -
and 74 80 6 0.31 - -
and 84 87 3 1.09 - -
incl. 86 87 1 3.11 - -
and 93 101 8 0.76 - -
incl. 95 96 1 2.41 - -
GR21-013 71 73 2 1.23 - -
and 77 81 4 0.46 - -
incl. 77 78 1 1.35 - -
and 102 103 1 4.52 - -
and 120 121 1 2.32 - -
and 213 230 17 0.36 - -
incl. 214 215 1 2.86 - -
and 235 241 6 0.42 - -
GR21-014 73 74 1 1.17 - -
and 95 99 4 0.34 - -
and 109 111 2 37.82 20.0 0.16
incl. 110 111 1 73.40 39.5 0.29
and 120 124 4 0.52 - -
Geology and Mineralization of the Cloud Drifter Trend
The Cloud Drifter Trend (Figure 1) is a ~3 by 2 km zone of highly anomalous Au -Ag-Sb-Cu-As-Bi-Te
geochemistry that is coincident with quartz -sulfide and sulfosalt vein s, sulfide -cemented breccias, and
quartz-sulfide replacement zones. In 2020, Kingfishers’ work along the Trend included prospecting that
yielded 312 rock geochemical samples yielding an average grade of 6.26 g/t Au and soil sampling which
produced an extensive soil geochemical anomaly with 50 samples returning over 1 g/t Au.
Mineralization within the Trend and throughout the 487 km2 Goldrange Project is closely associated with
and largely hosted by a complex of Late Cretaceous quartz -diorite and diorite intrusions emplaced into
Triassic to Cretaceous sedimentary and volcanic rocks.
Figure 2: Cloud Drifter Zone – 2021 Drilling
Drill Hole Descriptions
Drill holes GR21-012, -013 and -014 (Figures 3 and 4) were drilled from the same drill pad and targeted a
gold in soil geochemical anomaly in an area with limited surface exposure. All three holes collared uphill of
the upper contact of the quartz diorite intrusion from which limited surface grab samples grade up to 128.9
g/t Au. A 120-150 m thick sill of quartz diorite, dipping gently to the south, was intersected in all holes with
sedimentary rocks in the footwall and hanging wall. Vein s and breccias of quartz-carbonate-arsenopyrite-
pyrite ± chalcopyrite ± sphalerite are developed in both sedimentary and intrusive rocks and are flanked by
pervasive quartz-carbonate-sericite alteration.
Further geological descriptions of drill core and drill collar locations can be found in press releases dated
September 2, 2021 and October 6, 2021.
Figure 3: Cross-section of GR21-012 and GR21-014, view north-northeast
Figure 4: Cross-section of GR21-013, view east
Outstanding Assays and Future Plans
The Company awaits the remainder of a nalytical results from the 2021 drill program. The remainder of
assays will be released once they are received and QAQC protocols have been completed.
Kingfisher is currently in the planning stages for the 2022 drill program that is anticipated to begin in early
to mid May.
AMEBC Roundup Coreshack
Select polished drill core and rock samples from the Goldrange Project will be on display at the AMEBC
Roundup Coreshack on February 2 and 3, 2022. Drill core from visually significant intercepts in GR21-007,
-009, and -010 will be presented.
Representative photographs of the drill core that will be on display are included below:
GR21-007
GR21-009
GR21-010
QAQC and Core Sampling Protocols
All drillholes at the Goldrange property were NQ sized (47.6 mm diameter). A continuous series of one -
metre-long half-split core samples was taken down the entire length of each drill hole. Sample lengths were
reduced to a minimum of half a meter to avoid crossing lithologic contacts or other features deemed
important by Kingfisher geologists.
Unlabelled certified reference materials (CRM) were inserted systematically throughout the sample
sequence along with blanks and duplicate samples. The total number of blanks, duplicates and CRM
samples equals approximately 5% of the total samples taken.
Core samples were shipped to Acme Labs, a division of Bureau Veritas, located in Vancouver, British
Columbia, for preparation and analysis. Bureau Veritas is an ISO 9000 accredited analytical laboratory and
is independent of Kingfisher Metals an its Qualified Person. Samples were prepped using the PRP7 -250,
PUL85 and SPTPL packages and analysed for 45 major and trace elements using ICP -ES/MS (method
code MA200). A 30 g split from each sample was analyzed for Au using a lead collection fire assay fusion
that was digested and analyzed using AAS (method code FA430). A 30g split from samples that assayed
>10 ppm Au and/or >200 ppm Ag was analyzed using a lead collection fire assay fusion with a gravimetric
finish (method code FA530).
Qualified Person
Dustin Perry, P.Geo., Kingfisher’s CEO, is the Company’s Qualified Person as defined by National
Instrument 43-101, Standards of Disclosure for Mineral Projects, and has prepared the technical information
presented in this release.
About Kingfisher Metals Corp.
Kingfisher Metals Corp. (https://kingfishermetals.com/) is a Canadian based exploration company focused
on underexplored district-scale projects in British Columbia. Kingfisher has three 100% owned district-scale
projects that offer potential exposure to high -grade gold, copper, silver, and zinc. The Company currently
has 84,673,300 shares outstanding.
For further information, please contact:
Dustin Perry, P.Geo.
CEO and Director
Phone: +1 778 606 2507
E-Mail: [email protected]
Neither the TSX-V nor its Regulation Services Provider (as that term is defined in the policies of the TSX -
V) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note Regarding Forward-Looking Statements
Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of mineralization
hosted on the Company’s property. This news release contains forward-looking statements, which relate to
future events or future performance and reflect management’s current expectations and assumptions. Such
forward-looking statements reflect management’s current beliefs and are based on assumptions made by
and information currently available to the Company. All statements, other than statements of historical fact,
are forward -looking statements or information. Forward -looking statements or information in this news
release relate to, among other things: formulation of plans for drill testing; and the success related to any
future exploration or development programs.
These forward -looking statements and information reflect the Company’s current views with respect to
future events and are necessarily based upon a number of assumptions that, while considered reasonable
by the Company, are inherently subjec t to significant operational, business, economic and regulatory
uncertainties and contingencies. These assumptions include; success of the Company's projects; prices
for gold remaining as estimated; currency exchange rates remaining as estimated; availabil ity of funds for
the Company's projects; capital, decommissioning and reclamation estimates; prices for energy inputs,
labour, materials, supplies and services (including transportation); no labour - related disruptions; no
unplanned delays or interruptions in scheduled construction and production; all necessary permits, licenses
and regulatory approvals are received in a timely manner; and the ability to comply with environmental,
health and safety laws. The foregoing list of assumptions is not exhaustive.
The Company cautions the reader that forward -looking statements and information involve known and
unknown risks, uncertainties and other factors that may cause actual results and developments to differ
materially from those expressed or implied by such forward-looking statements or information contained in
this news release and the Company has made assumptions and estimates based on or related to many of
these factors. Such factors include, without limitation: risks related to the COVID-19 pandemic; fluctuations
in gold prices; fluctuations in prices for energy inputs, labour, materials, supplies and services (including
transportation); fluctuations in currency markets (such as the Canadian dollar versus the U.S. dollar);
operational risks and hazards inhere nt with the business of mineral exploration; inadequate insurance, or
inability to obtain insurance, to cover these risks and hazards; our ability to obtain all necessary permits,
licenses and regulatory approvals in a timely manner; changes in laws, regul ations and government
practices, including environmental, export and import laws and regulations; legal restrictions relating to
mineral exploration; increased competition in the mining industry for equipment and qualified personnel;
the availability of additional capital; title matters and the additional risks identified in our filings with Canadian
securities regulators on SEDAR in Canada (available at www.sedar.com). Although the Company has
attempted to identify important factors that could cause actual results to differ materially, there may be other
factors that cause results not to be as anticipated, estimated, described, or intended. Investors are
cautioned against undue reliance on forward -looking statements or i nformation. These forward -looking
statements are made as of the date hereof and, except as required under applicable securities legislation,
the Company does not assume any obligation to update or revise them to reflect new events or
circumstances.