Kingfisher Metals Reports 234 meters of 1.0% Copper Equivalent, within 558 meters of 0.64% CuEq at HWY 37 Project,
Kingfisher Metals Reports 234 meters of 1.0% Copper
Equivalent, within 558 meters of 0.64% CuEq at HWY 37 Project,
Golden Triangle, British Columbia
VANCOUVER, BC / ACCESS Newswire / September 10, 2025 / Kingfisher Metals Corp.
(TSXV:KFR)(FSE:970)(OTCQB:KGFMF) ("Kingfisher" or the "Company") is pleased to
announce initial results from the 2025 drilling program at the HWY 37 Project. The 849 km 2
HWY 37 Project is located within the Golden Triangle, British Columbia.
HW-25-004 has returned one of the highest and longest grade copper-gold intercepts ever
completed at the Williams porphyry copper-gold deposit. The drillhole intercepted 557.8
meters 1 of 0.29% copper, 0.30 g/t gold, and 1.6 g/t silver (0.64% CuEq) 2 (Table 1).
Importantly this hole highlights a body of strong bornite mineralization demonstrating the
potential for additional high-grade porphyry copper gold deposits at the HWY 37 Project.
Highlights include:
• HW-25-004 : 557.8 meters at 0.64% CuEq from 328.10 meters
o Including 234.35 meters at 1.00% CuEq from 328.10 meters
Dustin Perry, CEO of Kingfisher, states "In these initial drill results we see clear
confirmation of our exploration concepts - consistent vertical grade and expansion of the
bornite-rich stockwork. The new data de-risks the broader project targets, justifies future
drill meters, and strengthens our conviction that we're advancing a value-creating asset for
shareholders. "
HW-25-004 Summary
HW-25-004 was collared at 169 o degrees and -75 o dip (Figure 1 & 2), upslope and north of
potassic alteration at Williams. After passing through the Williams thrust fault at 327
meters (m), the drill cut into copper-bearing potassic alteration ( Figure 3). Well-developed
potassic alteration with chalcopyrite-bornite-diginite is present from 328 to 805 m
downhole with chalcopyrite-dominant mineralization from 805 to end of hole at 885.9 m.
Bornite occurs at surface at the discovery outcrop 1040 m elevation (m el.) and has been
intersected in historical drilling down to 480 m el. These new results extend bornite
mineralization to 340 m el., or 140 m deeper than previously known (Figure 2). The higher-
grade subinterval of 328.10 to 562.45 m is associated with several syn-mineral porphyry
phases and elevated copper is best developed in high fracture zones, breccia and higher
vein density at the margin to the porphyry contacts. This subinterval is interpreted to be the
hot core of the sulfide system, as bornite > chalcopyrite. Bornite-rich cores to porphyry
systems are commonly associated with associated elevated gold grades. This is the first
intercept of the deeper extents of the bornite > chalcopyrite body and the vertical extent of
this body is unknown.
Table 1: Hole HW-25-004 Assay Results
Hole From (m) To (m) Interval 1
(m)
Cu % Au g/t Ag g/t CuEq 2
%
HW-25-004 328.10 885.90 557.80 0.29 0.30 1.6 0.64
Incl. 328.10 562.45 234.35 0.44 0.49 2.3 1.00
Figure 1: Plan View Historical and 2025 Drillhole Locations
Figure 2. Plan view of Williams deposit area
Figure 3: Hole HW-25-004 Cross Section with 130m window width, Williams Deposit
Table 1. Summary of Diamond Drill Holes
Hole
ID Zone
Easting
(mE)
North
(mN) Azi
( o )
Dip
( o )
Final
Depth
(m)
Status
UTM NAD83 Zone
09
HW-
25-
001
Williams 409395 6344077 119 -80 803 Complete , samples
shipped to assay lab
HW-
25-
002
East
Williams 409769 6343628 292 -85 550 Complete , samples
shipped to assay lab
Hole
ID Zone
Easting
(mE)
North
(mN) Azi
( o )
Dip
( o )
Final
Depth
(m)
Status
UTM NAD83 Zone
09
HW-
25-
003
East
Williams 410086 6343432 286 -68 668 Complete , samples
shipped to assay lab
HW-
25-
004
Williams 409510 6344131 169 -75 886
Reported in this release,
Samples were
prioritized
HW-
25-
005
Upper
Hank 410475 6341586 295 -76 282
Lost hole at 282 m short
of proposed depth - no
plans to send for assay
at this time
HW-
25-
006
Upper
Hank 410475 6341586 295 -77 839
Complete , samples
shipped to assay lab.
Redrill of HW-25-005
HW-
25-
007
Lower
Hank 408790 6342028 110 -65 192
Lost hole at 192 m short
of proposed depth - no
plans to send for assay
at this time
HW-
25-
008
Williams 409415 6343882 027 -73 893 Complete , samples
shipped to assay lab
HW-
25-
009
Williams 409586 6343818 255 -82 761 Complete , samples
shipped to assay lab
HW-
25-
010
Williams 409419 6343879 075 -84 797
Complete , detail
logging and sampling in
progress
Hole
ID Zone
Easting
(mE)
North
(mN) Azi
( o )
Dip
( o )
Final
Depth
(m)
Status
UTM NAD83 Zone
09
HW-
25-
011
Lower
Hank 408790 6342028 111 -65 959
Complete , Redrill of
HW-25-007, detail
logging
and sampling in
progress
Summary of Work Completed to date:
• Drilling was completed on September 7 th , totalling 7,630 m
o HW-25-001, -002, -003, -004, -006, -008, and -009 have been sent to the
Bureau Veritas ("BV") lab for assay (currently logging and sampling HW-25-
010 and 011). Failed holes HW-25-005 and -007 will not be assayed at this
time.
• 84 person days of mapping
• >750 soil samples
• >650 surface rocks samples
• 30.7 line-km of IP geophysics
• 1,750 line-km (covering ~319 km 2 ) of airborne Mobile Magnetotellurics (MMT)
geophysical survey
• Light Detection and Ranging (LiDAR) survey covering 256 km 2
Quality Assurance / Quality Control (QAQC)
Drilling on site at the HWY 37 Project was supervised by on-site Kingfisher personnel who
implemented a full QAQC program using coarse blanks, pulp blanks, standards, and
duplicates inserted into the sample stream to monitor analytical accuracy and precision.
The samples were sealed on site using tamper proof seals with unique identifiers. The
samples were sent to the BV lab in Vancouver, British Columbia. BV's quality control
system complies with global certifications for Quality ISO/IEC 17025:2017 - General
requirements for the competence of testing and calibration laboratories . Diamond drill
core samples were analyzed using a combination of BV's MA200 process for low level
concentrations (4 acid digestion/ICP-ES/MS) and MA 370 process for higher level
concentrations (4 acid digestion/ICP-ES). Gold assaying was completed using FA430, a 30-
gram fire assay with AAS finish. If applicable, base metal overlimits were finalized with
titration, and gold overlimits completed with a gravimetric finish. Technical aspects of this
news release have been reviewed, verified, and approved by Tyler Caswell, P .Geo., Vice
President Exploration of Kingfisher, who is a qualified person as defined by National
Instrument 43-101 - Standards of Disclosure for Minerals Projects.
About Kingfisher Metals Corp.
Kingfisher Metals Corp. (https://kingfishermetals.com/) is a Canadian based exploration
company focused on copper-gold exploration in the Golden Triangle, British Columbia.
Through outright purchases and option earn in agreements (Orogen Royalties and Golden
Ridge Resources) the Company has quickly consolidated one of the largest land positions
in the region at the contiguous 849 km 2 HWY 37 Project. Kingfisher also owns (100%) two
district-scale orogenic gold projects in British Columbia that total 641 km 2 . The Company
currently has 88,822,226 shares outstanding.
For further information, please contact:
Dustin Perry, P .Geo.
CEO and Director
Phone: +1 778 606 2507
E-Mail: [email protected]
Neither the TSX-V nor its Regulation Services Provider (as that term is defined in the policies
of the TSX-V) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note Regarding Forward-Looking Statements
Mineralization hosted on adjacent and/or nearby properties is not necessarily indicative of
mineralization hosted on the Company's property. This news release contains statements
that constitute "forward-looking statements. " Such forward-looking statements involve
known and unknown risks, uncertainties and other factors that may cause the Company's
actual results, performance or achievements, or developments to differ materially from the
anticipated results, performance or achievements expressed or implied by such forward-
looking statements. Forward-looking statements are statements that are not historical
facts and are generally, but not always, identified by the words "expects, " "plans, "
"anticipates, " "believes, " "intends, " "estimates, " "projects, " "potential" and similar
expressions, or that events or conditions "will, " "would, " "may, " "could" or "should" occur.
Forward-looking statements in this news release include, among others, statements
relating to expectations regarding the projects, and other statements that are not historical
facts. By their nature, forward-looking statements involve known and unknown risks,
uncertainties and other factors which may cause our actual results, performance or
achievements, or other future events, to be materially different from any future results,
performance or achievements expressed or implied by such forward-looking statements.
Such factors and risks include, among others: the Company may require additional
financing from time to time in order to continue its operations which may not be available
when needed or on acceptable terms and conditions acceptable; compliance with
extensive government regulation; domestic and foreign laws and regulations could
adversely affect the Company's business and results of operations; the stock markets have
experienced volatility that often has been unrelated to the performance of companies and
these fluctuations may adversely affect the price of the Company's securities, regardless of
its operating performance.
The forward-looking information contained in this news release represents the
expectations of the Company as of the date of this news release and, accordingly, is
subject to change after such date. Readers should not place undue importance on forward-
looking information and should not rely upon this information as of any other date. The
Company undertakes no obligation to update these forward-looking statements in the
event that management's beliefs, estimates or opinions, or other factors, should change.
1 True widths of the reported mineralized interval have not been determined.
2 Assumptions used in USD for the copper equivalent calculation (CuEq) were metal prices
of $4.00/lb copper, $3,000/oz gold, and $30/oz silver. Recovery is assumed to be 80% for
copper, 80% for gold and 80% for silver. The following equations was used to. calculate the
copper equivalence: CuEq = copper (%) + (gold (g/t) x 1.0938) + (silver (g/t) x 0.0109).
Differences may occur due to rounding.
SOURCE: Kingfisher Metals Corp.