Kahuna Kimberlite Sample Yields 2.32 Carats PER Tonne
DUNNEDIN VENTURES INC.
Suite 1110, 1111 West Georgia Street
Vancouver, BC V6E 4M3
Tel: 778.327.5799 / Fax: 778.327.6675
For Immediate Release TSX-V: DVI
KAHUNA KIMBERLITE SAMPLE YIELDS 2.32 CARATS PER TONNE
February 8, 2017 – Vancouver, BC, Canada. – Dunnedin Ventures Inc. (the "Company" or "Dunnedin")
(TSX-V: DVI) today reported the Company’s first diamond recovery results from the Kahuna kimberlite.
The 144.44 kg sample of Kahuna returned 13 commercial-sized stones (+0.85 mm) totalling 0.334 carats,
for a sample grade of 2.32 carats per tonne. The largest recovered diamond was a 0.12 carat clear and
colourless twinned octahedral stone. Results are provided in the table below.
Table 1: Diamonds recovered from the Kahuna kimberlite by Dunnedin
Figure 1: Commercial-sized diamonds (+0.85 mm) recovered from the Kahuna kimberlite
Sample
Weight
in Dry
Tonnes
Total
Number of
Diamonds
Recovered
(+0.425
mm)
Total
Carat
Weight
(+0.85
mm)
Endecott Sieve Size (mm)
0.425 0.60 0.85 1.18 1.70
Sample
Grade
(cpt)
Largest
Diamonds
(carats)
Kahuna 0.144 87 0.33 57 17 10 1 2 2.32 0.12, 0.09,
0.03
Chris Taylor, Dunnedin’s CEO said, “The Kahuna kimberlite is a large target with a maiden Inferred
Resource of over 3 million tonnes, and potential for an additional 3.7 to 10.7 million tonnes at a range of
depths. Historical bulk sampling yielded 1.04 carats (+0.85 mm) per tonne, but audits to determine a final
sample grade do not appear to have been completed by the past operator. With this latest sample
returning 2.35 carats per tonne, the Company is strongly encouraged by the size and grade potential of
this kimberlite, and we view bulk sampling to determine diamond value as a priority.”
Details of an Inferred Resource and Target for Further Exploration have been published for the Kahuna
kimberlite, both of which were completed by APEX Geoscience Ltd. and are available as a National
Instrument NI 43-101 technical report filed on the SEDAR website (www.sedar.com) on March 12, 2015.
Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability. The
potential quantity and gr ade of any Target for Further Exploration is conceptual in nature, there is
insufficient exploration to define a Mineral Resource and it is uncertain if further exploration will result in
the target being delineated as a mineral resource.
Most of the Kahuna diamonds recovered by Dunnedin are clear and colourless variants of octahedra.
The Kahuna sample was treated through an autogenous mill-fusion circuit located at CF Mineral Research
Ltd. of Kelowna, British Columbia, using a lower size cut-off of 0.425 mm. Unlike standard DMS recovery
methods, the circuit can recover nearly all diamonds present in a kimberlite sample to the predetermined
cut-off size, along with associated indicator minerals.
About the Kahuna Kimberlite
Near vertical high grade ki mberlite dike that extends to surface with over 4.5 kilometres of drill -
defined strike length and remains open to extension along strike and at depth
Defines the northernmost drilled portion of a 20+ kilometre strike length kimberlite -intruded
structure that also contains the Notch kimberlite dike ; over 2,500 m of historical drilling and 360
tonnes of historical bulk sampling have been completed at Kahuna
Historical and current samples were taken at the same locations or within metres of each other
Most historical drilling is within 80 to 120 metres of surface, however some deeper drill holes were
completed and also intersected the kimberlite more than 200 m vertically from surface, indicating
continuity to depth where tested
Width reported as generally between 2 and 4 m, with an average of 3.2 m, and an average density
of 1.99 t/m3
Dunnedin also recently announced that the Kahuna, Notch, PST and other kimberlites are emplaced within
gold-mineralized metasediment belts that have historically re ported gold in drill core, as well as pristine,
locally-sourced gold grains in tills across a broad area contiguous with Agnico Eagle Mines Ltd.’s (TSE:
AEM) development-stage Meliadine gold project (see news release, January 31, 2017) .
Mr. R. Bob Singh, P.Geo, Exploration Manager, is the qualified person responsible for the technical content
of this news release.
For further information please contact Mr. Knox Henderson, Investor Relations, at 604-551-2360.
On behalf of the Board of Directors
Dunnedin Ventures Inc.
Chris Taylor
Chief Executive Officer
About the Kahuna Project
Kahuna is an advanced stage high grade diamond project located near Rankin Inlet, Nunavut. Dunnedin is
now recovering diamonds and indicator minerals from a series of kimberlite and till samples collected
during two seasons of field work. An Inferred Resource released by Dunnedin showed over 4 million carats
of macrodiamonds (+0.85 mm) at a grade of 1.01 carats per tonne had been defined along the partial strike
length of the Kahuna and Notch kimberlite dikes through shallow drilling. The largest diamond recovered
was a 5.43 carat stone from the Kahuna dike which was a piece of a larger diamond that had been broken
during the sample preparation process and was reconst ructed as having an original size of 13.42 carats.
Recent results include a 0.82 tonne sample of the PST kimberlite dike which returned 96 macrodiamonds
totalling 5.34 carats (+0.85 mm), a 2.36 tonne sample of the Notch kimberlite which returned 89
macrodiamonds totalling 2.38 carats (+0.85 mm), and a 144 kilogram sample of the Kahuna kimberlite that
returned 13 macrodiamonds totalling 0.33 carats (+0.85 mm) . The Kahuna project is located adjacent to
the development -stage Meliadine gold project of Agnico Eagle Mines Ltd and also hosts gold
mineralization in metasediment ary units including a recently defined greenstone belt with over 40
kilometres of strike length that is associated with elevated gold-in-till results.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies
of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Statements included in this announcement, including statements concerning our plans, int entions and
expectations, which are not historical in nature are intended to be, and are hereby identified as, "forward-
looking statements". Forward -looking statements may be identified by words including "anticipates",
"believes", "intends", "estimates", "expects" and similar expressions. The Company cautions readers that
forward-looking statements, including without limitation those relating to the Company's future operations
and business prospects, are subject to certain risks and uncertainties that cou ld cause actual results to
differ materially from those indicated in the forward-looking statements.