Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

KC.V ·

Kutcho Copper Defines High Priority Drill Targets

Exploration Programs

Kutcho Copper Corp. | 717 – 1030 West Georgia Street | Vancouver, British Columbia | Canada | V6E 2Y3

Telephone: (604) 628-5623 | www.kutcho.ca

Kutcho Copper Defines High Priority Drill Targets

Vancouver, B.C., December 5, 2023. Kutcho Copper Corp. (TSXV: KC, OTCQX: KCCFF)

(“Kutcho Copper” or the “Company”) is pleased to announce it has completed target generation

over its entire prospective project package that already hosts three volcanogenic massive sulphide

(“VMS”) copper-zinc deposits – Main, Sumac and Esso. The exploration package encompasses

several high priority targets, as well as a suite of longer lead target areas. The Esso West target is

the highest priority and has geophysical and geologic characteristics very similar to the Esso

deposit, the highest grade of the three known deposits at Kutcho and lies immediately along strike

to the west.

High Priority Targets:

• Esso West: 1,900 m strike by 500 m down dip coincident ZTEM1, VTEM2, magnetic, and

seismic target that lies along strike to the west of the high- grade Esso deposit. Historical,

drilling down dip, and at the eastern margin of the target returned an intercept of 7.2m @

2.0% Cu and 5.2% Zn.

• Mother: 7.5 km long, partially coincident ZTEM and VTEM targe t. A total of four

historical drill holes tested portions of the target and define a prospective geological

environment for a potential VMS deposit, including surface rock chip samples that returned

> 10% Cu, 0.10% Zn, 69 g/t Ag and 2.2 g/t Au over widths of 2.5 to 5cm.

• Far East: 3.5 km long, partially coincident ZTEM, VTEM and magnetic target. A total of

four historical drill holes tested a 400 m strike length of the target and defined a prospective

geological environment for potential VMS deposits, including anomalous copper and zinc

values in syngenetic pyritic mudstones.

Vince Sorace, President & CEO of Kutcho Copper comments: “We are pleased to have completed

this phase of our target generation at Kutcho. The collection of new ZTEM, VTEM, magnetic and

seismic data has given our technical team the tools to unlock the full value of the generations of

exploration data collected on the project. This work defined a land package that encompasses over

60 strike km of fold -repeated favourable stratigraphy that we have distilled down to three

compelling high priority targets and two additional favourable trends. We are looking forward to

drill testing the Esso West and Mother targets, as well as advancing field evaluation of the Cairn,

Far East and Sumac Ridge trends, in 2024.”

1 ZTEM is the Z-Axis Tipper Electromagnetic is a geophysical technique utilizing natural earth currents to image the subsurface

three-dimensional distribution of apparent resistivity to depths exceeding one kilometer.

2 VTEM is the “Versatile Time-Domain Electromagnetic” technique and is useful for detecting and discriminating between

moderate to excellent conductors.

Kutcho Copper Corp.

-2-

Exploration Targets

The targets have been prioritized by their similarity to known mineralization, strength of

geophysical signatures and strength of supporting information (drilling, mapping, soil sampling,

chip sampling, stream sampling, etc.). The highest priority group all lie within the Kutcho upper

formation, where known mineralization occurs , including the Main, Sumac and Esso deposits.

These priority targets include Esso West, Mother, and Far East. The other targets are on interpreted

fold-repetitions of the same productive time horizon with similar volcanic stratigraphy to the south

of the main trend and are less well explored.

Figure 1: Overall Exploration Target Isometric View

Esso West Target

The Esso West target covers an area of 1,900 m strike by 500 m down dip and is defined by a

coincident ZTEM, VTEM, magnetic, and seismic anomaly that lies along strike and to the west of

the high-grade Esso deposit. The target is bracketed by a total of five historic drillholes that consist

of a combination of moderately to strongly sericite – pyrite altered quartz – crystals tuffs that

correlate to the immediate hanging wall rocks to the Main, Sumac, and Esso deposits and sericite

– pyrite altered lapilli tuffs, which are indicative of the foot wall sequence below the three known

deposits. However, none of these holes directly tested the Esso West target. In addition, a fence

of historical drillholes that were testing for the west extension of Esso mineralization struck the

interpreted down dip eastern margin of the target and intersected semi- massive and massive

sulphides in several holes and returned a best intercept of 7.2m @ 2.0% Cu and 5.2% Zn in

E094B3. Esso West would be a key focus of planned drill testing during 2024.

Kutcho Copper Corp.

-3-

Figure 2: Esso West Target Plan View

Figure 3: Esso West Target Morphology Isometric View*

*See news release dated February 11, 2021 for details of the Esso mineral resource estimate (“MRE”), including

important required disclosures under National Instrument 43-101, as well assumptions, qualifications and exclusions

used in preparing the MRE, cautionary language in respect of the inferred mineral resources and details of the

Qualified Person responsible for the MRE. Additional information can be found in the Feasibility Study Technical

Report dated effective November 8, 2021, which is intended to be read in its entirety.

Kutcho Copper Corp.

-4-

Mother Target

Mother is a 7.5 km long, partially coincident ZTEM and VTEM target. A total of four historic al

drill holes have tested portions of the target and define a prospective geological environment for a

potential VMS deposit. Two historical holes anchored on the western extents of the target

intersected an interpreted felsic flow dome consisting of a combination of sericite altered quartz,

quartz – feldspar and lapilli felsic tuffs similar to the setting of the Main, Sumac, and Esso deposits.

Silica exhalates with jasperoid development, and bands of magnetite and semi massive – massive

sulphides occur between felsic units. T hese exhalates returned surface rock chip samples that

ranged from 2.3% to greater than 10% Cu, 0.04% - 0.10% Zn, 15 g/t – 69 g/t Ag and 0.3 g/t – 6.2

g/t Au over widths of 2.5 to 5cm. Two drillholes located 2 km and 5 km to the west of these holes

intersected more distal felsic tuffaceous volcanic rocks and mudstones. The 2 km target segment

between the felsic dome and distal basin mudstones is a prime environment for hosting potential

VMS style mineralization. A preliminary ground program is planned for 2024, prior to drill testing

the target.

Figure 4: Mother exploration target

Kutcho Copper Corp.

-5-

Far East Target

Far East is a 3.5 km long partially coincident ZTEM and VTEM and magnetic target. A total of

four historic drill holes have tested 400 m (or ~11%) of the strike length of the target and define a

prospective geological environment for a potential VMS deposit where anomalous copper and zinc

values in syngenetic pyritic mudstones occur between a combination of felsic crystal and lapilli

volcanic tuffs. Discreet segments of the target are defined by VTEM and magnetic anomalies that

are similar to those over the three known deposits. The far eastern end of the anomaly suggests the

possibility of a new fold nose-type target.

Figure 5: Far East exploration target

Secondary Targets

Priority 2 targets present slightly different geologic environments to the known deposits. They are

located in the Kutcho mid and lower formations which are yet to show significant results from

exploration, however the strength of ZTEM/VTEM targets are compelling and additional field

work is required to define drill targets.

These target areas include Sumac Ridge and Cairn. Sumac Ridge lies within felsic volcanic rocks

in the footwall of the known mineralization in an area of tight folding . The area has significant

pyrite in outcrop and only two drillholes , located over 1 ,600 m apart , have tested this multi –

kilometer target.

Kutcho Copper Corp.

-6-

Cairn is a new VTEM target , with supporting ZTEM , generated in 2023. This multi – kilometer

target has only seen cursory mapping and reconnaissance rock sampling to date. A comprehensive

ground exploration program is planned for 2024 to evaluate both the Sumac Ridge and Cairn

targets.

There are several more ZTEM and VTEM targets on the Kutcho Property. As more is learnt

through the planned 2024 program, these other targets will be re -evaluated and prioritized for

further work.

Qualified Persons

The technical or scientific information in this press release has been reviewed and approved by

Andrew Sharp, P.Eng. BC (Lic. No. 47907), FAusIMM, Chief Operating Officer for Kutcho

Copper, who serves as a qualified person under the definition of National Instrument 43-101.

About Kutcho Copper Corp

Kutcho Copper Corp is a Canadian resource development company focused on expanding and

developing the Kutcho high grade copper -zinc project in northern British Columbia. Committed

to social responsibility and the highest environmental standards, the Company recently completed

a feasibility study on the Kutcho project and is positioned to advance permitting with the objective

of getting to a positive construction decision.

Vince Sorace

President & CEO, Kutcho Copper Corp.

For further information regarding Kutcho Copper Corp, please email [email protected] or visit our

website at www.kutcho.ca.

Cautionary Note Regarding Forward-Looking Statements

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the

TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains certain statements that may be deemed “forward-looking statements” with respect to the

Company within the meaning of applicable securities laws. Forward -looking statements are statements that are not

historical facts and are generally, but not always, identified by the words “looking forward”, “planned”, “potential”,

“prospective” “targets” and similar expressions, or that events or conditions “will” or “would” occur. Although

Kutcho Copper believes the expectations expressed in such forward -looking statements are based on reasonable

assumptions, such statements are not guarantees of future performance, are subject to risks and uncertainties, and

actual results or realities may differ materially from those in the forward-looking statements. Such material risks and

uncertainties include, but are not limited to, the results of the geophysical programs and their ability to define targets,

if any, and whether or not such targets represent mineralization of potential economic interest; the Company’s ability

to fund follow -up drill testing of any targets identified and the results of such follow -up work . In respect of the

Company’s feasibility study referenced herein, material risks and uncertainties include the Company’s ability to raise

sufficient capital to fund its obligations under its property agreements going forward, to maintain its mineral tenures

and concessions in good standing, to explore and develop the Kutch o project or its other projects, to repay its debt

and for general working capital purposes; changes in economic conditions or financial markets; the inherent hazards

associates with mineral exploration and mining operations, future prices of copper and ot her metals, changes in

general economic conditions, accuracy of mineral resource and reserve estimates, the potential for new discoveries,

the potential to convert inferred resources to indicated or measured resources, the potential to optimize the mine plan,

Kutcho Copper Corp.

-7-

the ability of the Company to obtain the necessary permits and consents required to explore, drill and develop the

Kutcho project and if obtained, to obtain such permits and consents in a timely fashion relative to the Company’s

plans and business objectives for the projects; the general ability of the Company to monetize its mineral resources;

and changes in environmental and other laws or regulations that could have an impact on the Company’s operations,

compliance with environmental laws and regulations, aboriginal title claims and rights to consultation and

accommodation, dependence on key management personnel and general competition in the mining industry. Forward-

looking statements are based on the reasonable beliefs, estimates and opinions of the Company’s management on the

date the statements are made. Except as required by law, the Company undertakes no obligation to update these

forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should

change.

Kutcho is a mineral exploration focused company and the Company’s Projects are in the mineral exploration stage

only. The degree of risk increases substantially where an issuer’s properties are in the mineral exploration stage as

opposed to the development or ope rational stage. Exploration targets and/or Exploration zones and/or Exploration

areas are speculative and there is no certainty that any future work or evaluation will lead to the definition of a

mineral resource.

Historical Information

This news release includes historical information that has been reviewed by Kutcho’s qualified person. Kutcho’s

review of the historical records and information reasonably substantiate the validity of the information presented in

this news release; however, Kutcho cannot directly verify the accuracy of the historical data, including (but not limited

to) the procedures used for sample collection and analysis. Therefore, any conclusions or interpretations borne from

use of this data should be considered too s peculative to suggest that additional exploration will result in mineral

resource delineation. Kutcho encourages readers to exercise appropriate caution when evaluating these data and/or

results.

Historical drill core was geologically logged with lithologies identified and notable geological features recorded.

Historical drill core was split in half (and in rare cases sawn in half) along sample intervals (lithology and

mineralization dependent) generally less than 3 m. Chemical analysis was performed dominantly for base metals (Pb,

Zn, Cu), and precious metal analysis (Au and Ag), and infrequently for and rarely for major elements and trace

elements. Historically, different commercial laboratories were utilized. These lab facilities may or may not have had

accreditation and in all cases accreditation (if applicable) pre -dated current ISO standards. Over that period, a

variety of digestion and assay methods were used, including atomic absorption, fire assay atomic absorption, aqua

regia atomic absorption and aqua regia ICP with varying detection limits. Reference materials (if any) were inserted

at the analytical level and thus were unblind to the facility processing the samples.