Kamoa-Kakula Copper Project secures US$420 million in project- level credit facilities, including a EUR 176 million (US$211 million) covered equipment financing facility with a US$9 million down- payment facility, and a US$200 million line of credit from Zijin
December 1, 2020
Kamoa-Kakula Copper Project secures US$420 million in project-
level credit facilities, including a EUR 176 million (US$211 million)
covered equipment financing facility with a US$9 million down-
payment facility, and a US$200 million line of credit from Zijin
Mining
The credit facilities will be used to accelerate Kamoa-Kakula’s
Phase 2 expansion to 7.6 million tonnes per annum to Q3 2022,
significantly ahead of schedule
Kamoa-Kakula’s outstanding economics are combined with first-
class sustainability and social initiatives in keeping with the
project’s goal of producing the world’s “greenest copper”
KOLWEZI, DEMOCRATIC REPUBLIC OF CONGO – Ivanhoe Mines (TSX: IVN; OTCQX:
IVPAF) Co-Chairs Robert Friedland and Yufeng “Miles” Sun announced today that
Kamoa Holding Limited, the joint-venture holding company of the Kamoa-Kakula
Copper Project in the Democratic Republic of Congo (DRC), has secured an equipment
financing facility of up to EUR 176 million (approximately US$211 million), together with
a US$9 million down-payment facility. The two facilities will be used by the project to
purchase underground mobile mining equipment and services from leading Swedish
manufacturers Sandvik AB and Epiroc AB, and Finnish manufacturer Normet Oy.
In addition, Gold Mountains (H.K.) International Mining Company, a subsidiary of Zijin
Mining Group, has provided Kamoa Holding Limited with a limited recourse line of
credit of US$200 million secured by the project’s pre-production ore stockpiles to fund
the Phase 2 concentrator expansion. US$200 million is sufficient to cover the cost of the
second, 3.8 million-tonne-per-annum (Mtpa) concentrator module at the Kakula Mine –
doubling the mine’s processing capacity from 3.8 Mtpa to 7.6 Mtpa.
At the end of October 2020, the project’s pre-production surface stockpiles contained
approximately one million tonnes of high-grade and medium-grade ore at an estimated
grade of 3.47% copper. An additional 622,000 tonnes of low-grade development ore also
has been stockpiled on surface. The project is positioned for a significant acceleration
in the tonnage, as well as a marked increase in the grade, of ore added to the surface
stockpiles as more mining crews soon will begin working in the higher-grade areas of
2
the Kakula and Kansoko mines. The pre-production surface stockpile figures will be
updated imminently to reflect November’s production.
The combined funds from the credit facilities will be used to fast track the overall
development of Kakula’s Phase 2 module, including the mill and associated
infrastructure, as well as to accelerate mining activities at the Kakula and Kansoko
deposits to keep both concentrator plants operating at full capacity. The additional
funding is expected to accelerate the completion of the Phase 2 mill expansion from Q1
2023 to Q3 2022.
Kamoa-Kakula expects to soon draw down the equivalent of approximately US$50
million of the equipment financing and down-payment facilities to account for the large
fleet of mobile mining equipment already purchased and in operation at the Kakula
Mine.
Phase 1 copper production at the Kakula Mine scheduled to begin in July
2021; Phase 2 development officially underway
Mr. Friedland commented, “Kamoa-Kakula remains solidly on track to begin Phase 1
copper production in July 2021, and these two non-dilutive, project-level credit facilities
allow us to draw down funds as needed to execute the Phase 2 concentrator plant
expansion project well ahead of our previous schedule. We share this vision for project
optimization and advancement with our partners at the Kamoa-Kakula Project.
“Collectively, we have a very positive outlook for copper prices in the coming years; so
we want to ensure that the operation reaches its near-term production capacity as
expeditiously as possible, while also maintaining our strong balance sheet. Given
today's uncertain macroeconomic environment, we view these credit facilities as
judicious and timely, with an amortization schedule that fits well with the planned start-
up of Kamoa-Kakula’s Phase 2 expansion, which is expected to significantly increase
the project’s cash-generating capabilities.
“The recent, independently-prepared pre-feasibility study for the expanded, 7.6 Mtpa
mining operation – sourcing ore from both the Kakula and Kansoko mines – highlights
the exceptional economic returns of this second phase development. Using a copper
price assumption of US$3.10 a pound, the study outlines an after-tax NPV8% of US$6.6
billion and an IRR of 69% over a 37-year mine life, as well as payback of just 2.5 years,”
Mr. Friedland added. “The pre-feasibility study also assumed that financing will be on
the basis of 100% equity, so we have the opportunity to significantly increase returns by
leveraging these credit facilities.”
Kakula is projected to be the world’s highest-grade major copper mine with an initial
mining rate of 3.8 Mtpa at an estimated average feed grade of 6.6% copper over the first
five years of operation. Kamoa-Kakula also is forecast to become the world's second-
largest copper mine through a series of phased expansions to 19 Mtpa or more.
3
The long-lead items for the second 3.8 Mtpa concentrator plant have been ordered and
the second phase of the project’s development officially is underway. Requests for
tenders for the second-phase earthworks and civil works also have been issued.
The full scope of the Phase 2 expanded facilities includes the underground expansion
at the Kakula Mine to reach an annual production rate of 6 Mtpa, the commencement of
commercial mining operations at the Kansoko Mine at a 1.6-Mtpa steady state, a second
3.8-Mtpa concentrator module at Kakula, and associated surface infrastructure to
support the expansion at the various sites. A portion of the Phase 2 capital expenditure
and subsequent expansions are expected to be funded by cash flows.
The Kamoa-Kakula Copper Project is a joint venture between Ivanhoe Mines (39.6%),
Zijin Mining Group (39.6%), Crystal River Global Limited (0.8%) and the DRC
government (20%).
Kamoa-Kakula committed to be a leader in environmentally-responsible
copper mining
A recent independent audit of Kamoa-Kakula’s greenhouse gas intensity metrics
performed by Hatch Ltd. of Mississauga, Canada, a leading, international environmental
consulting firm, confirmed that Kamoa-Kakula will be among the world's lowest
greenhouse gas emitters per unit of copper produced, validating the project’s
commitment to be a leader in environmentally-responsible copper mining.
Kamoa-Kakula will be powered by clean, renewable hydroelectricity and approximately
one half of the mine’s tailings will be mixed with cement and pumped back underground
to fill mined-out voids, resulting in a surface tailings containment facility that is tiny
compared to other major mines.
The Swedish Export Credit Agency (EKN), the Swedish Export Credit Corporation (SEK)
and Standard Bank South Africa have conducted an environmental and social due
diligence of the project based on the existing Environmental and Social Impact
Assessment. The project has developed an Environmental and Social Action Plan with
the purpose of managing identified risks in line with international standards.
“We are proud to combine the project’s outstanding economics detailed in the recently
released, independent Integrated Development Plan 2020, with first-class
environmental, social, and community initiatives,” Mr. Friedland stated.
4
Equipment financing facility
The EUR 176 million (approximately US$211 million) equipment financing facility has an
interest rate of 3.24%. The facility has an availability period of three years and amortizes
over a period of five years from utilization and is tied to underground mining equipment
at the Kamoa-Kakula Project. EKN has provided both political and commercial cover to
the lenders and will receive a one-off premium per tranche’s first utilization that will
average no more than 9.49%.
A facility of EUR 82 million (approximately US$98 million) is available for the financing
of the mining equipment for Phase 1, and a further facility of up to EUR 94 million
(approximately US$113 million) will be available for the Phase 2 mining equipment.
The equipment financing facility will be used for the purchase of best-in-class,
mechanized underground mining equipment from Swedish companies Sandvik AB and
Epiroc AB, and Finnish company Normet Oy, three of the world’s leading suppliers.
The EKN guarantee is for an amount up to 85% of the export contract value from the
equipment suppliers, and hence the determining factor in the sizing of the equipment
finance facility. In order to optimize the overall funding package, a portion of the
equipment purchase not covered under the EKN guarantee is being provided by
Standard Bank DRC under the down-payment facility.
Mark Farren, Kamoa Copper's Chief Executive Officer (left), and Rochelle De
Villiers, Kamoa Copper's Co-Chief Financial Officer (right), with one of the mine's
Sandvik 63-tonne haul trucks from Sweden. Mr. Farren and Mr. De Villiers are key
members of the project's on-site management team advancing the project.
5
Miner Jean Yav checking on one of Kamoa-Kakula’s Epiroc semi-autonomous,
double-boom drilling rigs from Sweden, operating in the Kakula Mine.
Preparing for a blast in one of Kakula’s high-grade access drives using a Normet
Charmec emulsion charge-up vehicle from Finland.
6
Down-payment facility
The US$9 million down-payment facility has an interest rate of 9.19% and will be
amortized over four years. This facility is being provided by Standard Bank DRC.
This facility is available for the financing of the mining equipment for Phase 1, and may
be upsized by a further US$15 million for the Phase 2 mining equipment, subject to
mutual agreement between Kamoa Copper and Standard Bank DRC.
The equipment finance is secured only by the equipment that is being financed. The
down-payment facility is unsecured. No guarantee is required from any of the sponsors
or parent companies with Kamoa Holding Limited issuing a non-binding Letter of
Support, confirming its support for the project.
Drawdowns under the equipment finance facilities remain subject to a number of
conditions precedent customary for facilities of this nature.
HCF International Advisers of London, UK, acted as financial advisor on the equipment
finance and down-payment facilities.
Zijin line of credit secured by the surface ore stockpiles
The US$200 million line of credit provided by Zijin has an annual interest rate of 10% per
annum; however, interest will be capitalized and shall not be payable until commercial
production commences at the Phase 2 concentrator. The line of credit may be drawn for
a period of three years from the initial drawdown, in line with the approved budget for
the project. Repayment of principal amounts of the line of credit will not commence
until six months after commercial production at Phase 2, or by July 31, 2023 at the
latest.
The line of credit is secured by the surface ore stockpiles at the Kakula and Kansoko
mines, and once payments come due, will be repaid out of the mine’s excess free cash
flow before repayment of shareholder loans. Excess free cash flow will be determined
annually, and will be equivalent to annual revenue, less operating charges, taxes,
royalties, and capital expenditures. It also allows for a working capital allowance and
provides Kamoa Holding with a minimum cash balance equal to 25% of forecast capital
and operating expenditure for the forthcoming year.
The line of credit may be prepaid and Ivanhoe Mines has the right to advance to Kamoa
Holding up to 50% of the then outstanding principal amount plus the accrued but
unpaid interest, which funds would be used by Kamoa Holding to repay one half of the
line of credit that would then result in both joint venture partners having advanced
equivalent amounts for the Phase 2 development. The maturity date of the line of credit
is five years from initial drawdown, but may be extended by a further two years subject
to mutual consent.
7
At the end of October 2020, the project’s pre-production surface stockpiles contained
approximately one million tonnes of high-grade and medium-grade ore at an estimated
grade of 3.47% copper, containing approximately 35,000 tonnes of copper. An additional
622,000 tonnes of low-grade development ore also has been stockpiled on surface.
The contained copper in the project’s pre-production stockpiles is projected to grow to
approximately 125,000 tonnes by July 2021, when the Phase 1 copper production is
forecast to begin.
Laichang Zou, President of Zijin Mining (left), and Peter Zhou, Ivanhoe Mines’
Executive Vice President, China (right), at the signing ceremony for the Zijin
Mining US$200 million line of credit provided to Kamoa Copper.
8
At the end of October, Kakula’s main pre-production stockpiles at the mine’s
northern declines contained approximately 639,000 tonnes grading 3.71%
copper. Additional ore stockpiles are located at Kakula’s southern decline and
the Kansoko decline.
Chart 1: Cumulative tonnes and grade of pre-production ore stockpiles at the
Kakula and Kansoko mines from May 2020 to October 2020.
2.0%
2.5%
3.0%
3.5%
4.0%
--
200
400
600
800
1,000
1,200
May-20 Jun-20 Jul-20 Aug-20 Sep-20 Oct-20
Grade (% Cu)
Tonnes (kt)
Cumulative Tonnes and Grade Stockpiled
Stockpile Tonnes Stockpile Grade