Infinitum Copper Reports 20.60 Metres of 1.91% Copper, 2.00 g/t Gold and 40.91 g/t Silver in Drilling at La Adelita Project
Infinitum Copper Reports 20.60 Metres of 1.91% Copper, 2.00 g/t
Gold and 40.91 g/t Silver in Drilling at La Adelita Project
VANCOUVER, BC / September 13, 2022 / Infinitum Copper Corp. (TSXV:INFI),
(OTCQB:INUMF) ("Infinitum" or the "Company") is pleased to report results from the first two
of twelve diamond drill holes at Infinitum's flagship project, La Adelita in Sonora and Sinaloa
states, Mexico. Drill hole AD-22-0018 returned 20.60 metres (m) of 1.91% copper (Cu), 2.00
grams per tonne (g/t) gold (Au) and 40.91 g/t silver (Ag) starting at 163.15 m down hole in the
Cerro Grande zone (see figures 1, 2 and 3). This mineralization is hosted in pervasive skarn
alteration with abundant magnetite coinciding with the highest-grade mineralization (See Table
1). Drill hole AD-22-0017 was drilled above AD-22-0018, on the same section, and encountered
a 26.05 m long interval of strong skarn alteration with trace mineralization before it reached the
target depth. The Hole AD-22-0018 intersection is open in all directions along the favorable
contact between limestone and the intrusive.
Magneto-telluric (MT) geophysical survey results for this area were received subsequent to
drilling and interpretation indicates that mineralization may strengthen at depth below drill hole
AD-22-0018.
Rafael Gallardo, Senior Exploration Manager states "This phase of drilling was designed to
extend the high-grade copper-gold-silver mineralized trends cut in historic drilling, which
terminated against previously unrecognized folding and faulting of the host limestones. We are
pleased that our team's improved geologic model has found strong mineralization across these
apparent barriers and are very eager to see whether the magnetite and anomalies revealed by our
MT geophysical survey add additional important layers to our targeting."
"Our drilling is off to a great start with these initial drill results confirming the high-grade
mineralization at Cerro Grande and the geophysics indicating the system may strengthen to
depth" states Steve Robertson, President & CEO of Infinitum Copper. "La Adelita is clearly a
very large system, and we are delighted to see such high grades across wide geographic areas.
The more work we do, the more we like how our model for the overall mineralization model is
developing".
Click here to watch the video
Phase 1 Diamond Drilling Program
Recognizing that La Adelita is a big system, Infinitum's exploration has followed a methodical
approach, focusing on areas with the best opportunities to encounter continuous zones of high-
grade mineralization. To date, Infinitum has focused on two of the five main target areas (Figure
1): A) the La Adelita Anticline and B) the Las Trancas zone, where a 2022 discovery trench
revealed 9.15 m of 16.45 grams per tonne (g/t) gold, 1.90% copper and 3.50 g/t silver.
Phase 1 drilling consisted of 12 holes totaling 2,574 metres focused on the high-grade copper-
gold-silver skarn targets at Cerro Grande and the Cerro Grande Footwall (see Figure 1). Phase 2
drilling, expected to commence following the summer rainy season, will include targets at Las
Trancas. This news release reports the first two of the twelve drill holes. The Company will
release additional drill hole results as they are available in the coming weeks.
Drill holes AD-22-0017 and 0018 were drilled 70 meters north of the old Adelita adit to seek the
extension of the high-grade copper-gold-silver mineralization of the Cerro Grande zone and the
recently discovered Cerro Grande Footwall zone. Cerro Grande Footwall was identified as a fold
repeat of the favorable host limestone through surface mapping completed by Infinitum's
geological team earlier this year. Drill hole AD-22-0017 was the first attempt to test the target
but was lost at a depth of 145.50 metres in massive skarn with trace mineralization. Drill hole
AD-22-0018 was drilled at a steeper angle from the same pad as 0017 and successfully cut the
entire zone.
HOLE
ID
FROM
(m)
TO
(m)
WIDTH
(m)
TRUE
WIDTH
(m)
Cu
(%)
Au
(g/t)
Ag
(g/t)
Zn
(%)
AD-22-
0017
46.70 55.85 9.15 9.15 0.14 0.06 1.24 NSV*
AD-22-
0018
163.15 187.50 24.35 20.60 1.91 2.00 40.91 NSV
* No Significant Values
Table 1 - Significant Drill Intercepts, Cerro Grande zone.
Drill Hole AD -22-0018
Drill hole AD-22-0018 intersected a zone 20.60 m wide of grossularite-andradite skarn with
semi-massive magnetite and disseminated copper mineralization grading 1.91% Cu, 2.00 g/t Au
and 40.91 g/t Ag (Table 1). This zone corresponds well with the surface mapped Cerro Grande
Footwall zone (see Figures 2 and 3) and the intercept is open up-dip, to depth, and to the north
and south along the favorable contact between limestone and the intrusive. The mineralization
consists of chalcopyrite, bornite and covellite and the richest chalcopyrite, bornite and covellite
zones correlate well with higher gold values. The magnetite content is estimated to vary from
15% to 75% over the 20.60 m length and iron values average 24%. The semi-massive magnetite
associated with the high-grade copper-gold-silver mineralization is expected to be detectable
with detailed magnetometry, which should be a very positive factor for future exploration. A
detailed magnetometer survey will be undertaken after vegetation dies back following the rainy
season.
Figure 1: La Adelita Project Exploration Zones
Figure 2: La Adelita Project Cerro Grande Zone
Figure 3: La Adelita Project AD-22-0017 and AD-22-0018 Cross Section
Quality Assurance / Quality Control
Diamond drill core sampling from the 2022 program was supervised by Infinitum Copper
personnel. The split core samples were delivered to the internationally certified ALS Minerals
laboratory facilities in Hermosillo City, where the samples were prepared by creating a pulp, and
then shipped to Vancouver, Canada for analysis. Assaying was done by ALS in Canada under an
ISO 1702 Quality management system. Samples were fire assayed for Au (Au-AA24) and
analyzed for multi-elements using method code ME-ICP61, following an aqua regia digestion.
Over limits were analyzed using the most appropriate method. Multi-element geochemical
standards, blanks, and duplicates are inserted systematically into the rock sampling series to
monitor lab performance. The control samples are inserted into every 20 samples in the case of
standards, blanks, and duplicates, and for rejects and pulps duplicates, each 30 samples
intercalated. Chain of custody controls track the samples which are transported from La Adelita
project to the camp in Picachos village and then to ALS in Hermosillo City, by Company
personnel.
Qualified Person
Steve Robertson, President and CEO of the Company, has acted as the Qualified Person as
defined in National Instrument 43-101 for this disclosure and supervised the preparation of the
technical information in this release.
For more information, please contact Anna Okopnaya, Manager of Investor Relations for
Infinitum Copper at [email protected], +525534417980, or Steve Robertson, President
and CEO of Infinitum Copper, at [email protected], (604) 409-3917.
On Behalf of the Board of Directors of
INFINITUM COPPER CORP.
Steve Robertson
Chief Executive Officer
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this release.
About Infinitum Copper
Backed by a strong team of industry veterans, Infinitum Copper is advancing La Adelita project,
where the Company has an option to earn an 80% interest. The high-grade copper-silver-gold La
Adelita Project is located in Sonora and Sinaloa states in Mexico and is subject to a 2% NSR. La
Adelita is a Carbonate Replacement Deposit located in a mineralized district with a rich history.
Infinitum Copper also has an option to earn 100% interest in the Hot Breccia project in the heart
of the Arizona Copper Belt about 90km north of Tucson, AZ. The Hot Breccia project is
prospective for porphyry copper and copper skarn mineralization.
Cautionary Note Regarding Forward-Looking Statements
This press release contains "forward-looking information" within the meaning of Canadian
securities legislation. The forward-looking information contained in this press release represents
the expectations of the Company as of the date of this press release and, accordingly, is subject
to change after such date. - 2 - Forward-looking information is based on, among other things,
opinions, assumptions, estimates and analyses that, while considered reasonable by the Company
at the date the forward-looking information is provided, are inherently subject to significant
risks, uncertainties, contingencies and other factors that may cause actual results and events to be
materially different from those expressed or implied by the forward-looking information. The
risks, uncertainties, contingencies and other factors that may cause actual results to differ
materially from those expressed or implied by the forward-looking information may include, but
are not limited to, risks generally associated with the Company's business, as described in the
Company's Filing Statement dated February 11, 2022. Readers should not place undue
importance on forward-looking information and should not rely upon this information as of any
other date. While the Company may elect to, it does not undertake to update this information at
any particular time except as required in accordance with applicable laws.
SOURCE: Infinitum Copper