iMetal Receives TSXV Approval for Option of the Advanced Kerrs Gold Deposit in Ontario's Prolific Abitibi Greenstone Gold Belt
iMetal Receives TSXV Approval for Option of the Advanced Kerrs
Gold Deposit in Ontario's Prolific Abitibi Greenstone Gold Belt
VANCOUVER, BC / ACCESSWIRE / April 4, 2022 / iMetal Resources Inc.
(TSX.V:IMR)(OTC PINK:ADTFF)(FRA:A7V2) ("iMetal" or the "Company") is pleased to
announce that it has received the approval of the TSX Venture Exchange (the "Exchange") for
the option to acquire 100% of the 665 hectare Kerrs Gold Deposit, located 90 kilometres east-
northeast of Timmins, Ontario, in the Abitibi Greenstone Gold Belt.
The Kerrs Gold Deposit is comprised of a series of gold-bearing pyritized quartz vein
replacement breccias enveloped by quartz fuchsite carbonate vein breccias averaging 10 metres
in thickness. The deposit hosts a historical resource estimate of 7,041,460 tonnes grading 1.71 g/t
gold yielding 386,467 ounces at a 0.5 g/t gold cut-off. Drilling subsequent to the historic estimate
appears to have extended the mineralized zone along strike and down dip.
"The Kerrs Gold Deposit is the perfect complement to Gowganda West, giving iMetal multiple
highly prospective projects in the prolific producing Abitibi Greenstone Gold Belt. The
Company's focus remains on closing its up-sized financing to fund sufficient diamond drilling to
both bring the Kerrs 386,467 ounce historic resource current and build upon it, as well as
undertake follow-up drilling at Gowganda West," commented iMetal CEO Saf Dhillon. "The
Company has come a long way under the new management team, continuing to build value for
iMetal shareholders and we look forward to a successful 2022," he concluded.
The Kerrs Gold historical resources estimate was disclosed in "NI 43-101 Resource Estimation
on the Kerrs Gold Deposit, Matheson, Ontario" prepared for Sheltered Oak Resources Inc. by
Garth Kirkham, P. Geo of Kirkham Geosystems Ltd., and dated June 10, 2011. The Company
considers the resource estimate relevant as it will drive further exploration by the Company and
reliable, as it was completed by a competent Qualified Person to the standards of the day. The
resource estimation methods and parameters were as follows:
• Forty-one drill holes were utilized to interpolate the KBX Zone.
• Composite length of 2 m was chosen and composites were weighted by length.
• Sectional interpretations were wire-framed to create 3-D solids of the zones.
• Zones were coded to the composites, and the block model, to constrain the modeling
process.
• Composites for the mineralized zone were used to interpolate into the blocks for each
zone.
• Ordinary kriging was used as the interpolator.
• Relative elevation modeling was used to guide the ellipse orientation that accounts for the
variation in dip due to the synclinal structure.
• A minimum of two composites were used for each block and a maximum of two
composites were used per drill hole; a maximum of 12 composites were used per hole.
• A cutting factor was applied for gold with outlier composites limited to 10 g/t Au based
on cumulative frequency plots. A zero cut-off grade was used for the manual polygonal
method.
• Minesight™ Software was used to perform the block modeling and estimations.
The Kerrs historic estimate is an inferred resource as defined in National Instrument 43-101. The
Company is not aware of any more recent resource estimates, though there was further drilling
completed after the historic estimate was released. The Company will need to review the
historical drilling and analyses and will need to twin a number of the historic holes to bring the
historic estimate current. The Company's Qualified Person has not done sufficient work to
classify the historic estimate as a current mineral resource. iMetal is not treating the historical
estimate as a current mineral resource.
The Kerrs Gold Deposit
Figure 1. Kerrs Gold Deposit
The road accessible Kerrs Gold Deposit consists of 36 units totaling approximately 665 hectares
and lies 90 kilometres east-northeast of Timmins, Ontario in the Abitibi Greenstone Gold Belt.
The Deposit was discovered by Noranda in the late 1970's early 1980's by following glacial
dispersion trains up-ice to the source. Drilling continued into the late 1980's, with further drilling
in the early to late-2000's and early 2011's. The drilling database was used to calculate the 2011
historic resource estimate, with further drilling completed subsequent to the release of the
estimate. The Kerrs Gold Deposit consists of a series of gold-bearing pyritized quartz vein
replacement breccias enveloped by quartz fuchsite carbonate vein breccias averaging
approximately 10 metres and alteration envelopes varying up to 40 metres in thickness. Gold is
directly related to pyrite content which ranges to 10% and is commonly found as disseminations
and crystal aggregates in the sheeted, quartz vein replacement breccias. These breccias,
averaging 31% quartz, exhibit reasonable correlation conforming to volcano-stratigraphic
contacts as well as moderate to good continuity in grade correlations at the lower and upper
boundaries of the vein breccia and alteration envelope assemblages.
The Kerrs Gold Deposit is stratabound, occurring at the contact of a thick, mafic pillow flow
sequence overlying an ultramafic, magnetite-rich flow sequence. Quartz feldspar porphyry sills
are spatially located above and below the breccia zones. This stratigraphy is synclinally folded
with the deposit lying 350 m to 425 m below surface. Drilling has traced the main zone 800
metres and remains open in both directions and at depth.
The Company continues to review the historical database to define target areas to both
significantly expand the historic resource and to test for additional structures. The Company has
yet to verify the historical data.
The Kerrs Agreement
iMetal entered into a purchase option agreement (the "Option Agreement"), dated January 24th,
2022, with Gravel Ridge Resources Ltd. and 1544230 Ontario Inc. (collectively, the "Vendors")
pursuant to which was granted the right to acquire the Kerrs Gold Deposit.
To acquire the Deposit, the Company is required to issue 3,500,000 common shares (the
"Consideration Shares") and complete a series of four cash payments totaling $210,000 to the
Vendors as follows:
• A cash payment of $60,000 and the issuance of the Consideration Shares, upon receipt of
the approval (the "Exchange Approval") of the Exchange.
• A further cash payment of $50,000 upon the one-year anniversary of the Exchange
Approval.
• A further cash payment of $40,000 upon the two-year anniversary of the Exchange
Approval.
• A final cash payment of $60,000 upon the three-year anniversary of the Exchange
Approval.
Following completion of the above cash payments and share issuances, the Company will
acquire the Deposit and will grant to the Vendors a three percent royalty (the "Royalty") on net
smelter returns from the Deposit. The Company may acquire two percent of the Royalty from the
Vendors at any time by completing a one-time cash payment of $2,000,000.
The Company is at arms-length from each of the Vendors. No finders' fees or commissions are
payable in connection with the Option Agreement. The Consideration Shares are subject to a
statutory hold period until August 2, 2022, in accordance with applicable securities laws.
The scientific and technical information contained in this news release has been reviewed and
approved by R. Tim Henneberry, P.Geo (British Columbia), a director of iMetal and a qualified
person as defined in National Instrument 43-101.
About iMetal Resources Inc.
A Canadian based junior exploration company focused on the exploration and development of its
portfolio of resource properties in Ontario and Quebec. iMetal is focused on advancing its
Gowganda West Project that borders the Juby Project, an advanced exploration-stage gold
project located within the Shining Tree Camp area in the southern part of the Abitibi Greenstone
Gold Belt about 100 km south-southeast of the Timmins Gold Camp.
ON BEHALF OF THE BOARD OF DIRECTORS,
Saf Dhillon
President & CEO
iMetal Resources Inc.
Tel. (604-484-3031)
Suite 550, 800 West Pender Street, Vancouver, British Columbia, V6C 2V6.
https://imetalresources.ca
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined
in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy
of this release.
This news release may include forward-looking statements that are subject to risks and
uncertainties. All statements within, other than statements of historical fact, are to be considered
forward looking. Although the Company believes the expectations expressed in such forward-
looking statements are based on reasonable assumptions, such statements are not guarantees of
future performance and actual results or developments may differ materially from those in
forward-looking statements. Factors that could cause actual results to differ materially from
those in forward-looking statements include results of exploration, variations in results of
mineralization, relationships with local communities, market prices, continued availability of
capital and financing, and general economic, market or business conditions. There can be no
assurances that such statements will prove accurate and, therefore, readers are advised to rely
on their own evaluation of such uncertainties. We do not assume any obligation to update any
forward-looking statements except as required under the applicable laws.
SOURCE: iMetal Resources, Inc.