Iamgold Reports High-Grade Drill Intersections from Its 2017 Drilling Program ON the Diakha Deposit, Siribaya Project IN Mali

NEWS RELEASE

TSX: IMG NYSE: IAG

IAMGOLD REPORTS HIGH-GRADE DRILL INTERSECTIONS FROM ITS 2017

DRILLING PROGRAM ON THE DIAKHA DEPOSIT, SIRIBAYA PROJECT IN MALI

TORONTO, January 31, 2018 – IAMGOLD Corporation (“IAMGOLD” or the “Company”) today provided

results from its 2017 drilling program at the Diakha deposit on its wholly owned Siribaya project in Western

Mali. In 2017, the Company completed a combined diamond and Reverse Circulation (“RC”) drilling

program designed to infill and increase confidence in the current resource as well as target expansions of

the Diakha deposit. Assay results are reported herein for 105 drill holes totaling 19,520 metres.

Assay intersections relating to this release are provided in Tables 1 and 2, and include the following

highlights:

Infill Drill Holes:

 SRD17-198: 26.0 metres grading 6.79 g/t Au

Including: 8.0 metres grading 20.52 g/t Au

 SRD17-205: 18.0 metres grading 11.06 g/t Au

Including: 6.0 metres grading 32.45 g/t Au

 SRD17-215: 13.0 metres grading 2.81 g/t Au

and 26.0 metres grading 2.62 g/t Au

Expansion Drill Holes:

 SRD17-217: 16.0 metres grading 4.70 g/t Au

Including: 4.0 metres grading 16.11 g/t Au

 SRD17-226: 10.0 metres grading 5.16 g/t Au

 SRC17-687: 16.0 metres grading 7.65 g/t Au

Including: 4.0 metres grading 28.94 g/t Au

 SRC17-704: 50.0 metres grading 2.01 g/t Au

Including: 4.0 metres grading 9.70 g/t Au

(Figure 1, attached to this news release, shows a drill hole plan map)

Craig MacDougall, Senior Vice President, Exploration for IAMGOLD, stated, " we are very pleased with the

results of our 2017 program which have not only better delineated high grade structures within the known

resource, but have also confirmed extensions of the mineralization to both the north and south along strike

beyond the current resource pit shell. These extensions have nearly doubled the strike length of the

mineralized foot print and we continue to advance towards our objective of achieving a targeted resource

threshold of 2 million ounces.”

page 2 of 11

About the Siribaya Project

The Siribaya project is wholly owned by IAMGOLD and consists of 8 contiguous exploration permits

covering a total area of 596.5 square kilometres, located in the Kédougou-Kéniéba inlier of the West

African Craton region of western Mali along the borders with Senegal and Guinea.

The project hosts current mineral resources comprising indicated resources totalling 2.1 million tonnes

averaging 1.90 grams of gold per tonne for 129,000 ounces and inferred resources comprising 19.8 million

tonnes averaging 1.71 grams of gold per tonne for 1.1 million ounces (see news release dated February

22, 2017).

Gold mineralization is hosted within highly prospective, Birimian-aged metasedimentary, volcanic and

intrusive rocks proximal to the Senegal-Mali Shear Zone. At Diakha, the largest deposit at Siribaya

discovered to date, gold mineralization occurs within an albitized sandstone unit similar to that hosting

IAMGOLD's Boto gold deposit in Senegal located approximately 10 kilometres to the north along strike.

Next Steps

In 2018, approximately 15,000 metres of drilling is planned to continue defining and expanding resources

at the Diakha deposit as well as to explore other identified priority targets. All results will be used to refine

the deposit model and will be incorporated into an updated resource estimate expected by year end.

Technical Information and Quality Control Notes

The drilling results contained in this news release have been prepared in accordance with National

Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101").

The sampling of, and assay data from, drill core and RC chips are monitored through the implementation of

a quality assurance - quality control (QA-QC) program designed to follow industry best practice. Rock chips

from the Reverse Circulation drilling are collected at the rig site, at one metre intervals, under the direct

supervision of IAMGOLD geologists and field technicians . Samples are riffle split to obtain two 3 kilogram

samples. One sample is retained for reference purposes and the other is used to prepare two-metre

composite samples for assay. The two-meter composite samples are prepared at the project site, by trained

technicians supervised by IAMGOLD geologists. Drill core (HQ and NQ size) samples were selected by the

IAMGOLD geologists and sawn in half with a diamond saw at the project site. Half of the core was retained

at the site for reference purposes. Drill core sample intervals are generally one metre in length.

The samples were assayed at the SGS Minerals Analytical Laboratory in Bamako, Mali, using a standard

fire assay with a 50-gram charge and an Atomic Absorption finish (FAA505). All samples returning values

greater than 10 g/t Au were re-assayed using a gravimetric finish (FAG505).

Qualified Persons

The information in this news release was prepared under the supervision of, and reviewed and verified by,

Craig MacDougall, P.Geo., Senior Vice President, Exploration for IAMGOLD. Mr. MacDougall is a Qualified

Person as defined by National Instrument 43-101.

Notes to Investors Regarding the Use of Resources

Cautionary Note to Investors Concerning Estimates of Indicated and Inferred Resources

This news release uses the term "indicated resources". We advise investors that while that term is recognized and

required by Canadian regulations, the United States Securities and Exchange Commission (the “SEC”) does not

recognize it. Investors are cautioned not to assume that any part or all of mineral deposits in this category will ever be

converted into reserves.

This news release also uses the term "inferred resources". We advise investors that while this term is recognized and

required by Canadian regulations, the SEC does not recognize it. "Inferred resources" have a great amount of

uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed

that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules,

page 3 of 11

estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies, except in rare

cases. Investors are cautioned not to assume that part or all of an inferred resource exists, or is economically or legally

mineable.

Cautionary Note to U.S. Investors

The SEC limits disclosure for U.S. reporting purposes to mineral deposits that a company can economically and legally

extract or produce. IAMGOLD uses certain terms in this news release, such as "measured," "indicated," or "inferred,"

which may not be consistent with the reserve definitions established by the SEC. U.S. investors are urged to consider

closely the disclosure in the IAMGOLD Annual Reports on Forms 40-F. You can review and obtain copies of these

filings from the SEC's website at http://www.sec.gov/edgar.shtml or by contacting the Investor Relations department.

The Canadian Securities Administrators' National Instrument 43-101 ("NI 43-101") requires mining companies to

disclose reserves and resources using the subcategories of "proven" reserves, "probable" reserves, "measured"

resources, "indicated" resources and "inferred" resources. Mineral resources have not demonstrated economic viability

and there can be no assurance that they can be converted to mineral reserves.

A mineral resource is a concentration or occurrence of natural, solid, inorganic material, or natural, solid fossilized

organic material, including base and precious metals in or on the Earth's crust in such form and quantity and of such a

grade or quality that it has reasonable prospects for economic extraction. The location, quantity, grade, geological

characteristics and continuity of a mineral resource are known, estimated or interpreted from specific geological

evidence and knowledge. A measured mineral resource is that part of a mineral resource for which quantity, grade or

quality, densities, shape and physical characteristics are so well established that they can be estimated with

confidence sufficient to allow the appropriate application of technical and economic parameters, to support production

planning and evaluation of the economic viability of the deposit. The estimate is based on detailed and reliable

exploration, sampling and testing information gathered through appropriate techniques from locations such as

outcrops, trenches, pits, workings and drill holes that are spaced closely enough to confirm both geological and grade

continuity. An indicated mineral resource is that part of a mineral resource for which quantity, grade or quality,

densities, shape and physical characteristics can be estimated with a level of confidence sufficient to allow the

appropriate application of technical and economic parameters to support mine planning and evaluation of the

economic viability of the deposit. The estimate is based on detailed and reliable exploration and testing information

gathered through appropriate techniques from locations such as outcrops, trenches, pits, workings and drill holes that

are spaced closely enough for geological and grade continuity to be reasonably assumed. An inferred mineral

resource is that part of a mineral resource for which quantity and grade or quality can be estimated on the basis of

geological evidence and limited sampling and reasonably assumed, but not verified, geological and grade continuity.

The estimate is based on limited information and sampling gathered through appropriate techniques from locations

such as outcrops, trenches, pits, workings and drill holes. Mineral resources which are not mineral reserves do not

have demonstrated economic viability. Investors are cautioned not to assume that part or all of an inferred resource

exists, or is economically or legally mineable.

Forward Looking Statement

This news release contains forward-looking statements. All statements, other than of historical fact, that address

activities, events or developments that the Company believes, expects or anticipates will or may occur in the future

(including, without limitation, statements regarding expected, estimated or planned gold production, cash costs, margin

expansion, capital expenditures and exploration expenditures and statements regarding the estimation of mineral

resources, exploration results, potential mineralization, potential mineral resources and mineral reserves) are forward-

looking statements. Forward-looking statements are generally identifiable by use of the words “may”, “will”, “should”,

“continue”, “expect”, “anticipate”, “estimate”, “believe”, “intend”, “plan” or “project” or the negative of these words or

other variations on these words or comparable terminology. Forward-looking statements are subject to a number of

risks and uncertainties, many of which are beyond the Company’s ability to control or predict, that may cause the

actual results of the Company to differ materially from those discussed in the forward-looking statements. Factors that

could cause actual results or events to differ materially from current expectations include, among other things, without

limitation, failure to meet expected, estimated or planned gold production, cash costs, margin expansion, capital

expenditures and exploration expenditures and failure to establish estimated mineral resources, the possibility that

future exploration results will not be consistent with the Company's expectations, changes in world gold markets and

other risks disclosed in IAMGOLD’s most recent Form 40-F/Annual Information Form on file with the United States

Securities and Exchange Commission and Canadian provincial securities regulatory authorities. Any forward-looking

statement speaks only as of the date on which it is made and, except as may be required by applicable securities

laws, the Company disclaims any intent or obligation to update any forward-looking statement.

About IAMGOLD

IAMGOLD ( www.iamgold.com) is a mid -tier mining company with four operating gold mines on three

continents. A solid base of strategic assets in North and South America and West Africa is complemented

page 4 of 11

by development and exploration projects and continued assessment of accretive acquisition opportunities.

IAMGOLD is in a strong financial position with extensive management and operational expertise.

For further information please contact:

Ken Chernin, VP Investor Relations, IAMGOLD Corporation

Tel: (416) 360-4743 Mobile: (416) 388-6883

Laura Young, Director, Investor Relations, IAMGOLD Corporation

Tel: (416) 933-4952 Mobile: (416) 670-3815

Toll-free: 1-888-464-9999 [email protected]

Please note:

This entire news release may be accessed via fax, e-mail, IAMGOLD's website at www.iamgold.com and through CNW Group’s website

at www.newswire.ca. All material information on IAMGOLD can be found at www.sedar.com or at www.sec.gov.

Si vous désirez obtenir la version française de ce communiqué, veuillez consulter le

http://www.iamgold.com/French/accueil/default.aspx.

Table 1: Diakha Prospect - 2017 Diamond Drilling results (43 DDH)

Hole# UTM WGS84 Zone29 AZ DIP EOH From To Length Gold

Easting Northing Elevation Deg Deg (m) (m) (m) (m) (g/t)

SRD17-191 240716 1369091 169 115 -60 300 84 89 5 2.4

191 202 11 1.64

SRD17-192 240782 1369168 169 115 -60 267 No significant value

SRD17-193 240703 1369205 165 115 -60 350 71 81 10 3.12

202 217 15 0.53

Including 215 217 2 1.46

SRD17-194 240784 1369226 171.5 115 -60 350 177 180 3 3.47

SRD17-195 240718 1369366 163 115 -59 340 64 88 24 2.15

Including 80 83 3 9.22

236 239 3 1.34

279 297 18 0.84

SRD17-196 240827 1369315 171 115 -59 200 16 19 3 1.28

27 37 10 0.77

53 63 10 0.64

165 180 15 0.77

Including 165 169 4 2.01

SRD17-197 240816 1369430 169 115 -55 200 26 45 19 1.38

Including 30 32 2 3.43

Including 39 41 2 3.66

167 182 15 2.17

Including 175 177 2 7.52

page 5 of 11

Including 180 182 2 5.28

SRD17-198 240666 1369775 156.3 115 -61 340 162 188 26 6.79

Including 169 177 8 20.52

196 200 4 1.58

321 329 8 1.37

SRD17-199 240652 1369832 156 115 -60 22 No significant value

SRD17-200 240654 1369835 156 115 -60 340 5 10 5 1.16

60 72 12 1.81

Including 66 68 2 6.5

SRD17-201 240713 1369917 158 115 -60 300 36 44 8 1.83

77 80 3 1.97

SRD17-202 240711 1370079 152 115 -63 340 51 54 3 1.23

SRD17-203 240697 1370261 148 115 -61 309 89 102 13 0.5

Including 89 92 3 1.03

185 191 6 1.19

SRD17-204 240799 1370043 164 115 -62 310 47 61 14 2.49

Including 47 53 6 4.74

68 73 5 1.52

SRD17-205 240655 1369616 158 115 -60 340 166 172 6 1.16

306 324 18 11.06

Including 306 312 6 32.45

SRD17-206 240731 1370406 161 115 -60 259.2 No significant value

SRD17-207 240770 1369880 175 110 -57 276 9 21 12 1.32

34 42 8 4.21

Including 38 42 4 8.11

55 71 16 0.60

198 211 13 0.95

Including 201 205 4 1.96

SRD17-208 240641 1370448 154 115 -60 46 No significant value

SRD17-209 240893 1369995 160.5 115 -60 200 55 62 7 6.43

160 170 10 1.13

SRD17-210 240656 1369717 160 115 -60 340 121 127 6 1.61

308 331 23 5.99

SRD17-211 240612 1369692 158 115 -62 330 139 144 5 4.37

page 6 of 11

SRD17-212 240801 1369270 170 115 -63 250 121 132 11 0.51

201 213 12 7.06

SRD17-213 240775 1369826 168 115 -70 220 58 71 13 1.80

97 103 6 1.79

210 220 10 0.8

SRD17-214 240807 1369761 160 115 -56 230 32 37 5 5.01

149 159 10 3.48

Including 149 152 3 8.5

196 210 14 0.69

SRD17-215 240753 1369723 162 115 -60 302.5 45 65 20 0.60

91 95 4 2.27

117 120 3 1.12

143 156 13 2.81

Including 152 156 4 8.05

237 263 26 2.62

Including 237 242 5 9.67

SRD17-216 240815 1369650 172 115 -60 245 0 18 18 1.00

Including 16 18 2 2.64

31 39 8 2.75

141 144 3 1.19

179 182 3 4.15

193 201 8 1.59

SRD17-217 240662 1369873 154 115 -60 280 119 135 16 4.70

Including 126 130 4 16.11

SRD17-218 240768 1369673 157 115 -60 300 38 41 3 2.25

81 86 5 9.86

113 116 3 3.65

226 233 7 1.69

SRD17-219 240713 1369425 167 115 -60 320 83 86 3 1.64

101 108 7 4.18

262 278 16 2.16

Including 266 273 7 4.56

SRD17-220 240787 1369391 165 115 -55 240 122 132 10 0.55

206 214 8 2.83

Including 211 214 3 4.69

SRD17-221 240691 1369268 166 115 -60 360 94 98 4 1.17

page 7 of 11

SRD17-222 240712 1369148 159 115 -60 300 67 70 3 9.82

250 253 3 6.02

SRD17-223 240670 1370050 151.2 115 -60 300 147 153 6 1.08

SRD17-224 240697 1370201 135 115 -60 17.5 No significant value

SRD17-224A 240694 1370204 149 115 -60 250 73 92 19 1.05

116 129 13 0.68

Including 126 129 6 1.07

SRD17-225 240669 1369008 166 115 -60 300 No significant value

SRD17-226 240604 1368920 161 115 -50 250 60 70 10 5.16

122 140 18 0.97

Including 122 124 2 4.32

Including 219 221 2 1.88

SRD17-227 240780 1368521 162 115 -50 250 35 56 21 1.11

Including 36 42 6 2.65

SRD17-228 240690 1368876 151 115 -50 250 182 189 7 1.54

Including 182 184 2 3.72

SRD17-229 240690 1368563 161 115 -50 249 122 128 6 1.99

SRD17-230 240868 1368474 164 115 -50 250 No significant value

SRD17-231 240965 1368436 154 115 -50 250 No significant value

SRD17-232 240746 1369185 172 115 -60 250 171 175 4 6.8

214 220 6 5.26

Notes:

 Drillhole intercepts are calculated using a minimum downhole length of 3 metres, a cut-off grade of 0.5 g/t gold, and may include

up to 5 metres of internal dilution.

 For brevity, drillhole intercepts with a downhole length of less than 10 metres and grading less than 1.0 g/t gold are not reported.

 Higher grade sub-intervals are highlighted for intervals that are equal to or exceed an 8.0 g/t gold cut-off grade using the

parameters above.

 The true widths of intersections are unknown at this time, but are interpreted to approximate the reported downhole lengths.

page 8 of 11

Table 2: Drilling Results - Diakha Prospect - 2017 RC program (62 RCH)

Hole# UTM WGS84 Zone29 AZ DIP EOH From To Length Gold

Easting Northing Elevation

(m) (m) (m) (m) (g/t)

SRC17-662 240640 1369952 157 115 -60 153 100 104 4 1.27

SRC17-663 241002 1370069 161 115 -58 84 36 42 6 1.34

SRC17-664 240942 1369868 160 115 -58 77 28 34 6 2.05

Including 30 32 2 4.87

SRC17-665 240924 1369545 172 115 -55 102 12 40 28 1.81

Including 32 40 4 5.08

56 68 12 1.07

Including 64 68 4 3.01

SRC17-666 241041 1369047 214 115 -58 90 22 26 4 1.21

86 90 4 1.86

SRC17-667 241005 1368899 208 115 -58 84

No significant value

SRC17-668 241004 1369067 213 115 -58 140 86 92 6 1.17

SRC17-669 240710 1369974 155 115 -58 159 8 26 18 0.52

SRC17-670 240805 1369931 164 115 -57 102

No significant value

SRC17-671 240988 1370013 166 115 -58 78 28 36 8 1.10

SRC17-672 240505 1369948 152 115 -58 105

No significant value

SRC17-673 240742 1370343 155.4 115 -58 160 144 152 8 2.24

SRC17-674 240724.

3

1368425.

2

168 115 -58 147 138 142 4 2.00

SRC17-675 240650 1368792 144 115 -58 150

No significant value

SRC17-676 240823 1368395 169 115 -58 150 58 76 18 0.71

Including 66 72 6 1.41

SRC17-677 240918 1368348 172 115 -58 45

No significant value

SRC17-678 241081 1368258 172 115 -58 148

No significant value

SRC17-679 241003 1368625 165 115 -58 113

No significant value

SRC17-680 240873 1369843 162 115 -60 160 22 26 4 1.01

90 106 16 1.75

SRC17-681 240900 1369889 164 115 -58 138 90 94 4 3.28